Posted on 09/27/2024 11:18:45 AM PDT by Red Badger
Researchers from the Institute of Industrial Science, The University of Tokyo, have efficiently removed oxygen from high-oxygen-concentration titanium, which might help reduce the production cost of an otherwise versatile metal.
Tokyo, Japan – Titanium is the ninth most abundant element in the Earth’s crust, yet products based on pure titanium are uncommon because it’s expensive to remove the oxygen from titanium ore. Reducing costs would encourage manufacturers to take advantage of the highly useful properties of titanium in their products.
Now, in a study recently published in Nature Communications, researchers from the Institute of Industrial Science, The University of Tokyo, have developed a procedure that reduces the cost of producing titanium that’s almost entirely free of oxygen. This oxygen removal protocol might benefit technological development and environmental sustainability.
Titanium is an incredibly versatile material because not only does it typically resist chemical damage, it’s strong yet light. For example, its light weight compared with other metals is why the base frame of modern iPhones consists of titanium alloy, despite the increased cost. Unfortunately, producing ultrapure titanium is significantly more expensive than manufacturing steel (an iron alloy) and aluminum, owing to the substantial use of energy and resources in preparing high-purity titanium. Developing a cheap, easy way to prepare it—and facilitate product development for industry and common consumers—is the problem the researchers aimed to address.
“Industry mass-produces iron and aluminum metal—but not titanium metal, because of the expense of removing the oxygen from the ore,” explains Toru H. Okabe, lead author of the study. “We use an innovative technology based on rare-earth metals that removes oxygen from titanium to 0.02% on a per-mass basis.”
A critical step in the researchers’ protocol is reacting molten titanium with yttrium metal and yttrium trifluoride or a similar substance. The end result is a low-cost, solid, de-oxygenated titanium alloy. The reacted yttrium can be recycled for further use. A highlight of the researchers’ work is that even titanium scrap that contains large amounts of oxygen can be processed in this manner.
“We’re excited by the versatility of our protocol,” says Toru H. Okabe. “The lack of intermediate compounds and straightforward procedures will facilitate adoption in industry.”
This work is an important step forward in making more efficient use of high-purity titanium than at present. A limitation of this work is that the resulting de-oxygenated titanium contains yttrium, up to 1% by mass; yttrium can influence the mechanical and chemical properties of titanium alloy. After solving the yttrium contamination problem, applications to industrial manufacturing will be straightforward.
###
The article, “Direct production of low-oxygen-concentration titanium from molten titanium,” was published in Nature Communications at DOI:10.1038/s41467-024-49085-4.
About Institute of Industrial Science, The University of Tokyo
The Institute of Industrial Science, The University of Tokyo (UTokyo-IIS) is one of the largest university-attached research institutes in Japan. UTokyo-IIS is comprised of over 120 research laboratories—each headed by a faculty member—and has over 1,200 members (approximately 400 staff and 800 students) actively engaged in education and research. Its activities cover almost all areas of engineering. Since its foundation in 1949, UTokyo-IIS has worked to bridge the huge gaps that exist between academic disciplines and real-world applications.
If so than, quick, Biden! Sell all we have to China!
Now I can finish that rocket in the backyard.
I always start projects and never finish them...
“Cheap yet Ultrapure!” That sounds like a very rich, though
ill mannered young Lady.
Rather like a very poor, well mannered one.
Am I the only one geeky enough to have seen "reducing" in this phrase and thought back to chemistry class and the removal of oxygen from a substance. So they are reducing the reducing cost.
Rearden Metal?
My Ironman suit can come fast enough.
A critical step in the researchers’ protocol is reacting molten titanium with yttrium metal and yttrium trifluoride or a similar substance. The end result is a low-cost, solid, de-oxygenated titanium alloy.
* * *
Sounds like a winner. Will this innovation create an opportunity for the American steel industry?
Depends on how much titanium deposits we have.
Imagine a car or truck body made of titanium.
As a point of reference, the SR-71 Blackbird fuselage is made of titanium..............
Well, looks like we missed out:
https://www.statista.com/statistics/1233845/reserves-titanium-minerals-worldwide-by-country/
Might be!..............
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.