Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Linksys Router Qusetion
8/25/10 | Don

Posted on 08/25/2010 3:35:01 PM PDT by Don@VB

I had to reset my Linksys WRT54G Wireless Router. I upgraded the Firmware to version 2.21.1 no problem. I followed the instructions and my network appears as one of the available networks in range (max strength 5 bars!) I click it to connect and as it attempts to acquire the address it say "Limited or no connectivity" I think whatever's wrong is something simple; I suspect it has something to do with the IP Address; I am using the default IP Address 192.168.1.1 Any suggestions appreciated. I may not respond back quickly as my alternate connection is spotty.


TOPICS: Computers/Internet
KEYWORDS: linksysrouter
Navigation: use the links below to view more comments.
first 1-2021-4041-46 next last

1 posted on 08/25/2010 3:35:05 PM PDT by Don@VB
[ Post Reply | Private Reply | View Replies]

To: Don@VB

The limited message sounds like a windows message. You can get that if you can connect to your router, but the router is not talking to thie net.

Check you DSL/Cable modem and then make sure your router is talking to your ISP.


2 posted on 08/25/2010 3:37:46 PM PDT by AFreeBird
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Are you running any firewall software? If so, it may need to be reset to recognize the new router configuration.


3 posted on 08/25/2010 3:37:46 PM PDT by TomGuy
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Have you verified that it is acquiring an address from your DSL/Cable modem? If the router doesn’t get a ISP IP address you’ll get that message and will not be able to surf the internet.

On a related note, look into using an Open Source firmware on your 54G and unlock more features. Both Tomato and DD-WRT are good choices and of course free.


4 posted on 08/25/2010 3:37:54 PM PDT by ATLDiver
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Have you verified that it is acquiring an address from your DSL/Cable modem? If the router doesn’t get a ISP IP address you’ll get that message and will not be able to surf the internet.

On a related note, look into using an Open Source firmware on your 54G and unlock more features. Both Tomato and DD-WRT are good choices and of course free.


5 posted on 08/25/2010 3:38:07 PM PDT by ATLDiver
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Have you tried calling Bombay?


6 posted on 08/25/2010 3:40:05 PM PDT by Jemian
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB
Plug an ethernet cable into your PC and the other end to a port on the router.

Login to the router via your browser using the address 192.168.1.1. Default password is admin. No User name is needed.

Check out your status first to see if it's connected to the internet. If it isn't, turn off your DSL or Cable Modem and your router. Leave off for about 20 seconds, turn on the modem first and let it come ready. Then turn on the router, let it come ready and give it another try.

7 posted on 08/25/2010 3:40:23 PM PDT by unixfox (Abolish Slavery, Repeal The 16th Amendment!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Check you DNS settings.


8 posted on 08/25/2010 3:42:19 PM PDT by bmwcyle (It is Satan's fault)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Jemian
'Have you tried calling Bombay?"

I love Bombay. I especially love it over ice, with a splash of tonic and a twist of lemon. I'm multicultural that way.

9 posted on 08/25/2010 3:43:44 PM PDT by OldDeckHand
[ Post Reply | Private Reply | To 6 | View Replies]

To: AFreeBird; Don@VB
The limited message sounds like a windows message. You can get that if you can connect to your router, but the router is not talking to thie net.

No, "limited or no connectivity" means that your laptop or whatever isn't able to get a local IP address from the router.

Check the IP address of the laptop (I presume you know how) -- if it's not 192.168.1.X, then you don't have a local IP address you can use. 192.168.1.1 is the local address of the ROUTER -- it shouldn't be assigned to the laptop.

I can't tell you exactly why you are having the problem without more information, but I suspect it is because you configured the router with a secure wireless network and have mis-entered the key on the laptop. Sometimes, that's how it manifests the error.

10 posted on 08/25/2010 3:43:55 PM PDT by justlurking (The only remedy for a bad guy with a gun is a good WOMAN (Sgt. Kimberly Munley) with a gun)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Don@VB

First - power off your DSL modem, then the linksys box... then, power up the DSL modem - wait for about 2 minutes to make sure it’s up - then power up the linksys box.


11 posted on 08/25/2010 3:45:12 PM PDT by Keith in Iowa (Iowa floods, Obama vacations. Moochelle Obama, please pass the cake.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: OldDeckHand
I love Bombay

Particularly Bombay Sapphire.

12 posted on 08/25/2010 3:48:28 PM PDT by windsorknot
[ Post Reply | Private Reply | To 9 | View Replies]

To: Don@VB

Obviously you’re NOT logged in


13 posted on 08/25/2010 3:50:00 PM PDT by JRios1968 (The real first rule of Fight Club: don't invite Chuck Norris...EVER)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB
I get $50/hr with a 2 hour minimum to answer questions like this.

I do have to wonder why you upgraded the firmware on your WRT router. Was there a specific problem that you needed to fix or was it a case of "Oh, an update, shiny...."?

/johnny

14 posted on 08/25/2010 3:50:27 PM PDT by JRandomFreeper (Gone Galt)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Get to a command prompt:

ipconfig /flush
ipconfig /renew


15 posted on 08/25/2010 3:50:34 PM PDT by edcoil (Truth's commotion is directly proportional to how deeply the lie was believed.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

I vote for. 11, 10, 15. In that order

They try the
Bombay


16 posted on 08/25/2010 3:55:58 PM PDT by John Galt's cousin (Principled Conservatism NOW! * * * * * * * * * * Repeal the 17th Amendment!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: John Galt's cousin

Whoops. 7 too


17 posted on 08/25/2010 3:57:12 PM PDT by John Galt's cousin (Principled Conservatism NOW! * * * * * * * * * * Repeal the 17th Amendment!)
[ Post Reply | Private Reply | To 16 | View Replies]

To: Don@VB

Time to get a new router. I really like the Linksys E1000. It was $60 and it is much faster then the old router. Very easy to setup also.


18 posted on 08/25/2010 4:01:17 PM PDT by Plumres
[ Post Reply | Private Reply | To 1 | View Replies]

To: Don@VB

Make sure all the lights are ON the cable router that connects to wireless purple model. If the lights are not ON =no connect. If lights are On check cable connect. Then see if works with plug in. If that works. You then have a problem to solve in purple wifi device. I have this same one. Then try next step.


19 posted on 08/25/2010 4:02:47 PM PDT by johngrace (God so loved the world so he gave his only son! Praise Jesus and Hail Mary!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: John Galt's cousin

Ok I’m back momentarily. I’m going to try your collective suggestions. If I dont make it back tell the world my story. (or make one up) As always folks, Thanks, don


20 posted on 08/25/2010 4:05:43 PM PDT by Don@VB (Power Corrupts)
[ Post Reply | Private Reply | To 16 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-4041-46 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson