Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Sending secret messages over public internet lines can take place with new technique
Eurekalert ^ | 10-Oct-2006 | Colleen Morrison

Posted on 10/10/2006 11:15:52 AM PDT by Teflonic

WASHINGTON, Oct. 10 -- A new technique sends secret messages under other people's noses so cleverly that it would impress James Bond--yet the procedure is so firmly rooted in the real world that it can be instantly used with existing equipment and infrastructure. At this week's annual meeting of the Optical Society of America in Rochester, N.Y., Bernard Wu and Evgenii Narimanov of Princeton University will present a method for transmitting secret messages over existing public fiber-optic networks, such as those operated by Internet service providers. This technique could immediately allow inexpensive, widespread, and secure transmission of confidential and sensitive data by governments and businesses.

Wu and Narimanov's technique is not the usual form of encryption, in which computer software scrambles a message. Instead, it's a more hardware-oriented form of encryption--it uses the real-world properties of an optical-fiber network to cloak a message. The sender transmits an optical signal that is so faint that it is very hard to detect, let alone decode.

The method takes advantage of the fact that real-world fiber-optics systems inevitably have low levels of "noise," random jitters in the light waves that transmit information through the network. The new technique hides the secret message in this optical noise.

In the technique, the sender first translates the secret message into an ultrashort pulse of light. Then, a commercially available optical device (called an optical CDMA encoder) spreads the intense, short pulse into a long, faint stream of optical data, so that the optical message is fainter than the noisy jitters in the fiber-optic network. The intended recipient decodes the message by employing information on how the secret message was originally spread out and using an optical device to compress the message back to its original state. The method is very secure: even if eavesdroppers knew a secret transmission was taking place, any slight imperfection in their knowledge of how the secret signal was spread out would make it too hard to pick out amidst the more intense public signal.

Although the researchers have made public this transmission scheme, and the components for carrying it out are all available, lead author Bernard Wu does not think this technique is being used yet.

"As the method uses optical CDMA technology, which is still undergoing significant research, I don't think any government or corporation is implementing this technique yet," Wu says.

While Wu foresees that government and businesses would have the greatest use for this technique, consumer applications are possible, he says. For example, consumers may occasionally transmit sensitive data via fiber-optic lines for a banking transaction. "This would not be a primary transmission scheme one would employ 24/7, as the price for enhanced security is a lower transmission rate," says Wu. Yet, since consumers send encrypted information to banks only intermittently, "the stealth method is practical" for that purpose, he says.


TOPICS: Miscellaneous; Technical
KEYWORDS: cdma; fiberoptics; science
Navigation: use the links below to view more comments.
first previous 1-2021-4041-44 last
To: ASA Vet; Izzy Dunne
Okay, find the car in this photo:

41 posted on 10/10/2006 2:12:14 PM PDT by Bon mots
[ Post Reply | Private Reply | To 34 | View Replies]

To: Izzy Dunne
This is old stuff. For instance, properly trained observers can detect the tower in this picture:

Those Twin Towers look nothing like the Twin Towers.

42 posted on 10/10/2006 4:26:38 PM PDT by lowbridge (DNC - "We support our troops! Ummm.....what do they look like again?")
[ Post Reply | Private Reply | To 12 | View Replies]

To: taxcontrol
I suppose I was thinking of the signal deconstruction/reconstruction taking place in a signal processor. In other words, the signal is extracted, noise and all, and then filtered through a digital filter. Digital filter can be via a ASIC designed specifically for the purpose, a general purpose DSP properly programmed, or totally in software if you have no latency concerns (like file transfers).

It hadn't occured to me to actually do the signal extraction in the optical filter stage. I wonder if that is indeed the authors intent. Perhaps I should actually read the paper!

43 posted on 10/10/2006 6:00:33 PM PDT by pepsi_junkie (Often wrong, but never in doubt!)
[ Post Reply | Private Reply | To 32 | View Replies]

To: arthurus

What tree?


44 posted on 10/10/2006 8:11:29 PM PDT by ASA Vet (Everyone keep clam!)
[ Post Reply | Private Reply | To 40 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-44 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson