Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Disappearing act: Device vanishes on command after military missions
Phys.org ^ | 8/26/19 | American Chemical Societya

Posted on 09/07/2019 11:50:02 PM PDT by LibWhacker

A polymer that self-destructs? While once a fictional idea, new polymers now exist that are rugged enough to ferry packages or sensors into hostile territory and vaporize immediately upon a military mission's completion. The material has been made into a rigid-winged glider and a nylon-like parachute fabric for airborne delivery across distances of a hundred miles or more. It could also be used someday in building materials or environmental sensors.

The researchers will present their results today at the American Chemical Society (ACS) Fall 2019 National Meeting & Exposition.

"This is not the kind of thing that slowly degrades over a year, like the biodegradable plastics that consumers might be familiar with," says Paul Kohl, Ph.D., whose team developed the material. "This polymer disappears in an instant when you push a button to trigger an internal mechanism or the sun hits it." The disappearing polymers were developed for the Department of Defense, which is interested in deploying electronic sensors and delivery vehicles that leave no trace of their existence after use, thus avoiding discovery and alleviating the need for device recovery.

The key to making a polymer disappear, or break apart, is "ceiling temperature." Below the ceiling temperature, a polymer configuration is favored, but above that temperature, the polymer will break apart into its component monomers. Common polymers, like polystyrene, have a ceiling temperature above ambient temperature and are very stable. And even when they are warmed above their ceiling temperature, some of these materials can take a long time to decompose. For example, thousands of chemical bonds link all of the monomers together in polystyrene, and all of these bonds must be broken for the materials to decompose. But with low ceiling-temperature polymers, such as the cyclic ones Kohl is using, only one bond needs to break, and then all of the other bonds come apart, so the depolymerization happens quickly. The process can be initiated by a temperature spike from an outside or embedded source, or by a light-sensitive catalyst.

For many years, researchers have attempted to make these polymers, but were unsuccessful because of the materials' instability at room temperature. Kohl's research group at the Georgia Institute of Technology discovered that they could overcome this issue if they were careful to remove all impurities formed during the synthesis. In addition, they found a number of aldehydes, including phthalaldehyde, that readily form cyclic polymers. Once they had optimized this polymer's synthesis, they focused on ways to make it disappear.

To do this, the researchers incorporated into the polymer a photosensitive additive, which absorbs light and catalyzes depolymerization. "Initially, we made it photosensitive to just ultraviolet light so we could make the parts in a well-lit room with fluorescent lighting, and it was just fine; it was stable," Kohl says. But when the polymer was placed outside, exposure to sunlight vaporized it (or reverted it back to a liquid, in some cases). A vehicle deployed at night would, therefore, disappear with the sunrise.

Kohl's group has since discovered new additives that can trigger depolymerization at different wavelengths of visible light, so the polymer can decompose indoors. "We have polymers designed for applications in which you come in the room, you turn the light on, and the thing disappears," Kohl says.

The group has also determined how to stall depolymerization. "We have a way to delay the depolymerization for a specific amount of time—one hour, two hours, three hours," he says. "You would keep it in the dark until you were going to use it, but then you would deploy it during the day, and you would have three hours before it decomposes." The team has considered chemical methods to start the decomposition process, as well. In addition, they are testing various copolymers that can be added to phthalaldehyde to change the material's properties without altering its ability to vanish.

Kohl says that this "James Bond"-like material is already being incorporated in military devices by other researchers. But he also sees the potential of the materials for non-military applications. For example, the researchers have made a disappearing epoxy for a temporary adhesive that could be used in building materials. They also imagine the material could be used as sensors for environmental monitoring. Once the sensors are finished collecting data, there is no risk of littering the environment since they can be triggered to vaporize. The material can also be used for delivery vehicles in remote areas where recovery is difficult.


TOPICS: Military/Veterans; Science
KEYWORDS: ceiling; devices; military; polymer; temperature; vanish
Navigation: use the links below to view more comments.
first previous 1-2021-27 last
To: LibWhacker

21 posted on 09/08/2019 8:02:06 AM PDT by fso301
[ Post Reply | Private Reply | To 1 | View Replies]

To: Spruce

Porky Pig.


22 posted on 09/08/2019 8:07:18 AM PDT by HANG THE EXPENSE (Life's tough.It's tougher when you're stupid.)
[ Post Reply | Private Reply | To 11 | View Replies]

To: Spruce

Or Porky Pig.

rwood


23 posted on 09/08/2019 8:21:11 AM PDT by Redwood71
[ Post Reply | Private Reply | To 11 | View Replies]

To: LibWhacker

A fixed-wing glider that dissolves when the sun hits it?

Can it ONLY be used at night?

Lots of R & D & $$$$$$ for something that literally can only be used 1/2 of the time.


24 posted on 09/08/2019 8:40:33 AM PDT by ridesthemiles
[ Post Reply | Private Reply | To 1 | View Replies]

To: LibWhacker

Wonder if the Acme company will sell biodegradable plastics to the public?.


25 posted on 09/08/2019 9:49:29 AM PDT by Vaduz (women and children to be impacIQ of chimpsted the most.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: LibWhacker

Doesn’t matter have to exist in some form even when transformed into some thing else? So plastic that self destructs is merely moving to another possibly more hazardous substance.


26 posted on 09/08/2019 10:00:48 AM PDT by Steven Scharf
[ Post Reply | Private Reply | To 1 | View Replies]

To: LibWhacker

The old “Mysterious Dr. Satan” Serial begins with the Governor opening a letter which was hand-delivered by a thug from Dr. Satan: “You have interfered with my affairs too often.” The letter mysteriously bursts into flame, leaving one to wonder why they the thug didn’t just take it with him after shooting the governor.


27 posted on 09/08/2019 3:58:09 PM PDT by \/\/ayne (I regret that I have but one subscription cancellation notice to give to my local newspaper.)
[ Post Reply | Private Reply | To 1 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-27 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson