Skip to comments.
Circle Cycle engine (new type of car engine. Darndest thing I have seen in awhile)
circlecycleice.com via Popular Science ad. ^
| 2012
| Circle cycle
Posted on 01/28/2012 3:50:00 PM PST by dynachrome
What is it?
Orbital,non-reciprocating internal combustion engine. Piston/Cylinder structured Adaptable to all liquid or gaseous fuels Ultra efficient Patent # 7721687B1; & Patents Pending
(Excerpt) Read more at circlecycleice.com ...
TOPICS: Business/Economy; Chit/Chat; Science; Weird Stuff
KEYWORDS: autos; circlecycle; engine; michigan; popularscience; saysmokey; smokeyyunick
Navigation: use the links below to view more comments.
first previous 1-20, 21-40, 41-60, 61-80, 81-89 next last
To: Batrachian
“The zenith of the internal combustion engine was reached in 1955 with the invention of the Small Block Chevy
Then there was Vega.
Now Volt.
21
posted on
01/28/2012 4:27:26 PM PST
by
hadaclueonce
(scrap copper is more than $3.00 a pound. wind generators are full of copper)
To: dynachrome
Flying cars will now become possible.
To: dynachrome
.
Resembles the "Wankle Engine" ... circa 1970's ...
Wikipedia:
The Wankel engine is a type of internal combustion engine using an eccentric rotary design to convert pressure into a rotating motion instead of using reciprocating pistons. Its four-stroke cycle takes place in a space between the inside of an oval-like epitrochoid-shaped housing and a rotor that is similar in shape to a Reuleaux triangle but with sides that are somewhat flatter. The very compact Wankel engine delivers smooth high-rpm power. It is commonly called a rotary engine, though this name applies also to other completely different designs. It is the only internal combustion engine invented in the twentieth century to go into production.[1]
The engine was invented by German engineer Felix Wankel. He received his first patent for the engine in 1929, began development in the early 1950s at NSU, completing a working prototype in 1957.[1] NSU then licensed the concept to companies around the world, which have continued to improve the design.
Thanks to their compact design, Wankel rotary engines have been installed in a variety of vehicles and devices including automobiles, motorcycles, racers, aircraft, go-karts, jet skis, snowmobiles, chain saws, and auxiliary power units. Perhaps the greatest proponent of the Wankel engine has been the Japanese company Mazda.
.
23
posted on
01/28/2012 4:29:21 PM PST
by
Patton@Bastogne
(Newt Gingrich and Sarah Palin in 2012 !)
To: dynachrome
I am kind of following these guys, who are developing a new kind of steam engine. Don't know if it will succeed, but they seem to have some intrest in standing waste heat recovery applications.
Cyclone Power
To: dynachrome
Wait until the manufacturers of the Orgasmatron see the illustrated engine at work.
25
posted on
01/28/2012 4:31:33 PM PST
by
wildbill
(You're just jealous because the Voices talk only to me.)
To: wally_bert
I am not sure if your picture is evidence that American civilization peaked in the 1950s, or if that car is the direct cause of our decline.
To: hadaclueonce
"
Then there was Vega.Now Volt."
We're discussing engines, not car models, but since you mention them, the Vega is what you get when all of your designers and engineers have retired and the bean counters and corporate brass design a car. As for the Volt, that's what you get when the government drives the entire design of a car.
Alas for Chevy!
To: dynachrome
Can’t easily see the advantage of this design.
It still is a reciprocating engine for starters.
28
posted on
01/28/2012 4:38:11 PM PST
by
Balding_Eagle
(Liberals, at their core, are aggressive & dangerous to everyone around them,)
To: dynachrome
It looks very interesting but there looks to be so many critical wear points that maintaining alignment and fit might be nearly impossible for very long.
For example, what seals the piston inside the cylinders? That piston must have perfect alignment as it enters the cylinder and contend with side scuffing and maintaining inline position until it leaves the cylinder. What is a tiny bit of wear going to do to the fit?
29
posted on
01/28/2012 4:40:07 PM PST
by
count-your-change
(You don't have to be brilliant, not being stupid is enough.)
To: Happy Rain
We should drill drill drill and then bring back the 426 Hemi when gas goes back to $.28 a gal. You don't have to wait. You can buy a Chrysler manufactured 426 Hemi now at $3.50gal.
426 Gen III Hemi Engine - 425 Horsepower
30
posted on
01/28/2012 4:47:31 PM PST
by
VeniVidiVici
(Obama's War on Prosperity is killing me)
To: Batrachian
I get the slings and arrows every time I say this, but I had a Vega, and I loved it, it was one of the most fun little cars I ever owned.
Ducking and covering...
31
posted on
01/28/2012 4:50:53 PM PST
by
AnTiw1
To: brivette
This is a PG rated thread. You’ll be banned if you talk about your Wankel here............
To: Figment
I was also thinking about the timing...Henry Ford was obsessed with his design of the “X Engine”, an 8 cylinder with 2 cylinders transposed to each other in an X ...the timing killed it.
33
posted on
01/28/2012 4:55:55 PM PST
by
coolbreeze
(giving money and power to government is like giving whiskey and car keys to teen-age boys.)
To: Batrachian
You got that exactly right! Which is why my top priority is on durability when buying any car.
34
posted on
01/28/2012 4:56:28 PM PST
by
entropy12
(Socialism has failed everywhere tried. It breeds mediocrity, corruption, nepotism & poverty for all)
To: wally_bert
Pennies for the Thorium, millions for gobermint busybodies to inspect it every month.
35
posted on
01/28/2012 5:02:35 PM PST
by
Kellis91789
(The ultimate result of shielding men from the effects of folly is to fill the world with fools.)
To: Balding_Eagle
It still is a reciprocating engine for starters. Without rings, and without an obvious way to circulate coolant (and a commercial automobile engine would require cooling).
And the most obvious drawback: the "engine" itself is rotating. That's a lot of mass for quick acceleration, and would detract from brake specific fuel consumption.
Some early aircraft radial engines were designed for the engine itself to rotate.
Never caught on.
36
posted on
01/28/2012 5:04:30 PM PST
by
Ole Okie
To: dynachrome
Very interesting and brilliant. Thanks for posting!
37
posted on
01/28/2012 5:08:24 PM PST
by
gorush
(History repeats itself because human nature is static)
To: hadaclueonce
as a former vega owner,I can tell you they sucked.
38
posted on
01/28/2012 5:10:08 PM PST
by
brivette
To: dynachrome
A little mis-alignment and I think you would come to a sudden stop. And the engine would disintegrate. You have to wonder about failure modes.
It certainly is an interesting design.
39
posted on
01/28/2012 5:13:16 PM PST
by
TChad
To: AnTiw1
I can't help comparing the Vega to the Chevy II. Now there was an excellent small car. Available with a 327/350 it would embarrass many larger muscle cars. Compare the Chevy II/Nova to the Vega and you realize that a car is its engine, with none more wonderful than the SB Chevy.
Navigation: use the links below to view more comments.
first previous 1-20, 21-40, 41-60, 61-80, 81-89 next last
Disclaimer:
Opinions posted on Free Republic are those of the individual
posters and do not necessarily represent the opinion of Free Republic or its
management. All materials posted herein are protected by copyright law and the
exemption for fair use of copyrighted works.
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson