Posted on 08/18/2012 2:50:53 PM PDT by Jet Jaguar
HARTFORD, Conn. The newest Colt .45-caliber pistol is touted for its durability and design.
It is tested to make sure it can be dropped in water, covered in mud, immersed in sand or ice, or left in a dust storm and still be able to blast off a round when you pull the trigger.
"Virtually, it's indestructible," said Casimir Pawlowski, who works in international sales and technical sevices for Colt Defense LLC. "You can drive over these things with a Humvee and they're still gonna work. It's like a brick that shoots bullets."
An order last month of new M45 Close Quarter Battle Pistols for the Marines is the first purchase of any Colt handgun in almost three decades by any branch of the U.S. military, though .45-caliber Colts were a trusty sidearm of the Army and Marines for most of the 20th century.
Pawlowski started working at Colt Defense several years ago after a 30-year career as a Navy Corpsman. In 1977, he joined the medical corps serving the Navy and U.S. Marines who carried an earlier version of the Colt as their official sidearm the Model 1911 .45-caliber automatic.
"We saw the .45s out there, and that's what the guys wanted," Pawlowski said.
Connecticut's historic gun manufacturer first sold its semi-automatic Model 1911, designed by John Moses Browning, to the U.S. military in 1911. At the turn of the 19th century, the military was looking for a stronger handgun than the .38-caliber revolvers used in close combat during the Phillipine-American War. The .45-caliber promised knock-down power more likely to kill than injure compared with the .38-caliber.
Browning's design was an impressive development from 19th century single-action Army revolvers that held six, individually loaded bullets. The Model 1911 was designed to have a spring-loaded magazine of bullets fit vertically inside the pistol grip. The Model 1911 features a sliding top which ejects a bullet casing, or shell, immediately after a bullet is fired while slipping another round into position for the next shot.
"It's been a brilliant design," Pawlowski said. "Browning was kind of like the Jimi Hendrix of the gun world at the time."
The Model 1911 Colt has been called the "most respected handgun" and was carried, mostly by U.S. military officers, during both World Wars, in Korea and Vietnam.
But in 1985, the federal government, switched to Italian-owned Beretta to provide 9-millimeter pistols as the new official sidearm for the military. The switch was controversial in the 1980s.
The argument in favor of changing to 9-millimeter cartridges was mostly to standardize the U.S. military with other members of the North Atlantic Treaty Organization, NATO. The U.S. General Accounting Office, however, said in 1982, leading up to the change, that substituting an existing inventory with 9-mm pistols would be costly. It wasn't clear if there was any advantage to a 9-mm round versus existing sidearms, the GAO report said.
In recent years, the Marine Corps has been building its own .45-caliber pistols at a facility in Quantico, Va., using parts from existing inventory of Model 1911 pistols and other commercial parts, said Barbara Hamby, spokeswoman for Marine Corps System Command, which orders guns for the Marines. The government, however, hadn't bought new handguns from Colt for decades. That changed this month with the first order of up to 12,000 Colt pistols, starting with 4,036 right away.
"The Colt pistol met or exceeded all requirements put forth in the solicitation and offered the best value to the government," Hamby said. "Colt Defense LLC successfully competed under a best value competitive source selection utilizing a performance specification. Any historical significance inferred from the selection of Colt's offered weapon is coincidental."
The West Hartford Colt manufacturing plant where the pistols are made, along with many other guns, is a spectacle of curiosities.
A computerized lathe about the size of an MRI machine sculpts gun barrels to the 1/10,000th of an inch.
In one room, a team of highly skilled engravers chisel designs on custom-made revolvers, making art on the firearm. They tap tiny, 24-karat-gold-wire strands into inlaid designs, including one pistol with a scrimshaw-scratched portrait of Samuel Colt on one side of the ivory handle.
Engraver Jan Gwinnell says he has been carving designs for Colt for 33 years. Master engraver George Spring said he's been with the company since 1975, though he started engraving earlier than that.
Colt even has a special sauce.
Deep inside the big-box factory is a square vat of chemicals that looks like a doughnut grease fryer, labeled "Activated Black Magic." Beside it are similar vats full of water. This is where polished, carbon steel pistols can be stained as azure as the deep ocean in Belize.
"That'll give you your royal blue finish on carbine steel," said Phil Hinkley, vice president of quality at Colt Defense LLC, said of the oxidizing chemical. "After they pull it out of here, they'll dip it into a cold water tank."
The color can be contrasted with inlaid gold, for example, for an exotic look to the expensive, custom-designed guns that are sold to collectors by the other Colt the company under the same roof that makes consumer guns sold at WalMart, Cabela's, Bass Pro Shops and gun stores.
Colt gives a pair of customized guns to each standing president, though Bill Clinton was the only one not to accept the offer, Hinkley said.
In the back of the factory, the accuracy of guns is tested in an indoor shooting range. In addition to paper targets, a series of microphones use acoustics to track the bullets.
"They pick up the acoustics of the round going by, and they'll chart what the group size is," Hinkley said. The microphones also measure the number of rounds fired per minute and the gun's muzzle velocity.
Two companies share the 310,000-square-foot facility on New Park Avenue in a commercial and industrial strip next to BJ's Wholesale Club.
Colt Defense LLC was spun off from its parent company Colt's Manufacturing Company LLC in 2002 to protect the military-contract business from lawsuits against gun makers. Colt Defense sells to U.S. and allied militaries in 90 nations around the world as well as to law enforcement agencies. Colt's Manufacturing makes guns for regular customers, such as collectors, hunters and target shooters.
While the military hasn't bought Colt handguns in 27 years, the federal government has purchased other Colt firearms all along. Since the M4 carbine was introduced in 1993, the U.S. Army has been a major customer, buying 19,000 the next year for the Army and Special Forces. Colt sells machine guns to the military, too.
Throughout the Iraq and Afghanistan wars, the military bought a steady supply of the M4 a short, lightweight rifle, which is a successor to the M-16 that the government bought from the Vietnam era until 1988.
The drawdown of troops a few years ago contributed to a financial slump at Colt Defense as net sales dropped from $270 million to $175 million between 2009 and 2010. Last year, sales were up to $208 million. The company also recovered from an $11.3 million net loss in 2010 to report net income of $5.2 million last year.
The Marines' contract to buy up to 12,000 pistols for $22.5 million over five years means it accounts for about 2 percent of Colt Defense's annual sales. That's not enough to drive the success of the company. But the historic return to Colt sidearms is significant and it's a morale boost within the company.
"I call it in the category of 'cool,'" said Gerry Dinkel, CEO and president of Colt Defense.
"It just has a lot of ring to it when you have something that's this long lived," Dinkel said of the Model 1911.
The return to West Hartford-made Colts from Italian-owned Beretta also carries some patriotic pride.
Dinkel said, "A lot of people have said it's great to go back to an American supplier."
LOL, yeah, great reasoning there.
The 1911 is not a finesse weapon, it is a both eyes open, lead down range quickly type combat weapon. It needs to be man handled to be effective. Don't treat it timidly.
You 1911 without sights is still a damned good weapon.
it was the Spanish-American War, not the “Philippine-American War.” .......................................... Uh? Then why didn’t they call it the model 98’ colt automatic?
Love it, we are going to use the same weapon that great,great, great, grampa used against Poncho Villa. Hey if it works, don’t try and fix it. Just rig it for an extended magazine.
“If they were going to replace the 1911 with a Beretta they should have gone with the 40 call Beretta 96F.”
The 40 didn’t exist when they made the switch.
No, but then again my manufacturer doesn’t see the need as so important that they’re fitting decockers to the new ones.
"The Browning pistol design was formally adopted by the US Army on March 29, 1911, and thus became known officially as the Model 1911. The US Navy and US Marine Corps adopted the Browning-designed pistol in 1913."
"The pistol was designed to comply with the requirements of the U.S. Army, which, during its campaign against the Moros in Philippines, had seen its trusty .38 revolver to be incapable of stopping attackers. An Ordnance Board headed by Col. John T. Thompson (inventor of the Thompson sub-machine-gun) and Col. Louis A. La Garde, had reached the conclusion that the army needed a .45" caliber cartridge, to provide adequate stopping power. In the mean time, J. Browning who was working for Colt, had already designed an autoloader pistol, around a cartridge similar to contemporary .38 Super (dimension-wise). When the Army announced its interest in a new handgun, Browning re-engineered this handgun to accommodate a .45" diameter cartridge of his own design (with a 230 gr. FMJ bullet), and submitted the pistol to the Army for evaluation."
I still have my Dad’s Government Model .45 automatic that he carried in WWII (it was a civilian model presented to him by the family before he headed off to D-Day).
Don’t know who thinks the M1911 is a cannon. Doesn’t recoil that much and the noise is mild compared to some magnums. An all-steel chunk of gun. Undeniable knockdown power and that’s a fact.
IIRC, lots of Army Rangers & airborne/airmobile folks carry M1911s. Can’t argue with success.
While I am not much of a fan of the the 1911, I think it is a great thing for the USMC to replace the 9mm Beretta with the much harder hitting 1911. Just like in the racing world there is no replacement for displacement and the 45acp displaces a lot more “stuff” than a 9mm.
Note to trisham: George Patton was usually photographed wearing a pair of revolvers. A nickle plated Colt.45 SAA and Smith & Wesson .357 mag. also nickle plated. Both with ivory grips. Patton was asked about his “pearl” handled pistols once and promptly answered that they were ivory handles. Pearl handles were for pimps and fagots.
It's a matter of user preference, not safety. CZ still makes the 75B (no decocker) and the 75BD (decocker). You can buy a brand new one (75B) just off the factory floor without a decocker. Certainly, if they were such a critical safety feature, CZ-USA's lawyers would have shut down production years ago.
The Army did not know that, and 15 years fighting the Moro only confused them more.
“At the time US troops were armed with either .30 caliber Krag or Springfield bolt-action rifles and .38 caliber double-action revolvers. While the .30 caliber rifles proved effective in stopping the attackers, the US troops handguns demonstrated an unnerving lack of stopping power, resulting in numerous reports of Moro warriors absorbing multiple pistol bullets while they continued to hack away at the Americans. Obviously the US troops morale suffered badly in this situation.
The combat pistol situation became so acute that old stocks of Model 1873 Colt revolvers in 45 caliber, many of which dated back to the Plains Indian Wars were returned to active service, where they quickly demonstrated a much better track record of stopping an attacker with one well-placed shot.
The battlefield experience against the Moros resulted in the famous Thompson-LeGarde tests by the US Military in 1904. In these tests a variety of military cartridges of the day were tested for their penetration, stopping ability and energy transfer, using both live and dead cattle at the target medium. While somewhat subjective by modern standards, the tests resulted in an official recommendation that a bullet, which will have the shock effect and stopping effect at short ranges necessary for a military pistol or revolver, should have a caliber not less than .45.”
I really, really, really want one!
Or a Kimber.
Bought my first .45 Colt for $45 USD in Viet Nam on the black market. Was on Swift Boats and they did not issue side arms except for a .38 revolver the boat officer carried.
I was on the boarding team and had to jump from our boat to some rickety, slimy, filthy wooden boat often in heavy seas. Finally got tired of trying to do this with an AR15 so bought my own .45. Shot the heck out of it and sold it to another Swifty when I left...for $45 bucks.
What the hell does that mean? Any weapon that requires more weight of effort to fire than the weight of the actual weapon *requires* a certain finesse.
Nobody sober has called it Short & Weak in ten years.
I love my 1911.
I’d like to get one of these new Colts, too, to add to my 2 Kimbers: a Custom TLE II and a Eclipse Target II.
The Colt sounds like it’ll take some serious punishment, too.
I think you are right. John Browning’s birthday should be a national holiday. I am serious about that.
During WWI, Browning charged the government exactly $1 for a machine gun which was worth many millions just in royalties.
Browning mentioned that his son was over there fighting (incidentally trying out the BAR) and many other people’s sons were doing the same.
He was a real patriot.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.