Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Power from the Air: Device Captures Ambient Electromagnetic Energy to Drive Small Electronic Devices
Science Daily ^ | 07-08-2011 | Staff + Georgia Institute of Technology Research News

Posted on 07/08/2011 1:09:28 PM PDT by Red Badger

Researchers have discovered a way to capture and harness energy transmitted by such sources as radio and television transmitters, cell phone networks and satellite communications systems. By scavenging this ambient energy from the air around us, the technique could provide a new way to power networks of wireless sensors, microprocessors and communications chips.

Matter & Energy

Energy Technology Detectors Batteries

Computers & Math

Spintronics Research Computer Science Information Technology

Strange Science Reference

Microwave IEEE 802.11 Radio Radiant energy

"There is a large amount of electromagnetic energy all around us, but nobody has been able to tap into it," said Manos Tentzeris, a professor in the Georgia Tech School of Electrical and Computer Engineering who is leading the research. "We are using an ultra-wideband antenna that lets us exploit a variety of signals in different frequency ranges, giving us greatly increased power-gathering capability."

Tentzeris and his team are using inkjet printers to combine sensors, antennas and energy scavenging capabilities on paper or flexible polymers. The resulting self powered wireless sensors could be used for chemical, biological, heat and stress sensing for defense and industry; radio frequency identification (RFID) tagging for manufacturing and shipping, and monitoring tasks in many fields including communications and power usage.

(Excerpt) Read more at sciencedaily.com ...


TOPICS: Business/Economy; Culture/Society; Technical
KEYWORDS: electricity; electromagnetic; energy; johngaltsmotor
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-73 next last
To: Tucker39

I was using 3d printers back in 2005/2006 to make test models of surgical implants.


21 posted on 07/08/2011 1:28:38 PM PDT by Kirkwood (Zombie Hunter)
[ Post Reply | Private Reply | To 4 | View Replies]

To: Red Badger
Its been done before...


22 posted on 07/08/2011 1:29:51 PM PDT by C210N (0bama, Making the US safe for Global Marxism)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Lazamataz

A radio station transmitter does not suffer greater costs when more radios are tuned in. It just blasts that energy out in all directions, and your radio picks up a bit of it. This gizmo just collects that energy and routes it for other uses.


23 posted on 07/08/2011 1:30:13 PM PDT by ctdonath2
[ Post Reply | Private Reply | To 16 | View Replies]

To: Red Badger

bflr


24 posted on 07/08/2011 1:30:39 PM PDT by Captain Beyond (The Hammer of the gods! (Just a cool line from a Led Zep song))
[ Post Reply | Private Reply | To 1 | View Replies]

To: KarlInOhio

You get arrested for theft of services..............


25 posted on 07/08/2011 1:31:15 PM PDT by Red Badger (Casey Anthony: "Surprise, surprise."...............)
[ Post Reply | Private Reply | To 19 | View Replies]

To: Lazamataz

More kinda like when you drive on a highway, you heat up the road. Clever people have embedded water pipes in sections of freeways and gathered that waste heat & put it to good use.


26 posted on 07/08/2011 1:31:26 PM PDT by ctdonath2
[ Post Reply | Private Reply | To 16 | View Replies]

To: Red Badger
...Tentzeris, a professor in the Georgia Tech School of Electrical and Computer Engineering who is leading the research...

Georgia Tech? That's good enough for me - this story's for real'.

27 posted on 07/08/2011 1:32:16 PM PDT by GOPJ (Black flash mobs: street level reflection of elite liberal hatred for middle class America..)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger
The timing on this caught my attention as just a couple days ago I was telling some friends that I had a 5th grade teacher who predicted (to the class) that someday in the future electricty would be "broadcast" like radio waves and we'd pick it up on antenna's to power our homes.

But that was around 1956 or so, we also thought everyone would have flying cars by now, too.
28 posted on 07/08/2011 1:32:32 PM PDT by FrankR (A people that values its privileges above its principles will soon lose both.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: KarlInOhio

Hypothetically, of course, and if you wanted to risk killing yourself and possibly burning your house down, it would be a lot easier to just wrap a few turns of insulated wire around one of the hot lines. It’s pretty common in Mexico and other places.


29 posted on 07/08/2011 1:32:57 PM PDT by Jack of all Trades (Hold your face to the light, even though for the moment you do not see.)
[ Post Reply | Private Reply | To 19 | View Replies]

To: Tucker39
"But until I actually see one in operation I’ll classify it in the same category as the “3-D Printer” that has been making the rounds recently."

What is so unbelievable about 3D printers?? They've been around for quite a while. You can even find instructions on the net to build one for yourself. I watched one work on an interview with Jay Leno about his antique car collection. He uses it to duplicate no longer available pieces (not structural stuff.....decorative).

30 posted on 07/08/2011 1:35:17 PM PDT by Wonder Warthog
[ Post Reply | Private Reply | To 4 | View Replies]

To: Lazamataz

When your drafting on a highway you are raising the pressure behind the lead car reducing that cars drag also.


31 posted on 07/08/2011 1:36:53 PM PDT by rsobin
[ Post Reply | Private Reply | To 16 | View Replies]

To: wxgesr

didn’t he work on using the energy generated by the Van Allan (sic) belt?


32 posted on 07/08/2011 1:39:23 PM PDT by Rumplemeyer (The GOP should stand its ground — and fix bayonets.)
[ Post Reply | Private Reply | To 18 | View Replies]

To: Tucker39

There’s a company about a block from here that does 3-d ‘printing’........It uses UV laser and a special liquid to create 3-D models of cad designs................the laser scans the surface of the liquid, turning on and off from a ‘slice’ of the object in memory. The liquid hardens when exposed to the UV. The platform then raises about 0.001 inch and then the next ‘layer’ is created. When it’s done, a complete 3-D model of your drawing is left standing on the platform..............


33 posted on 07/08/2011 1:40:18 PM PDT by Red Badger (Casey Anthony: "Surprise, surprise."...............)
[ Post Reply | Private Reply | To 4 | View Replies]

To: Gadsden1st; Tucker39

See a 3D printer in action here:

http://www.wimp.com/functionaltools/


34 posted on 07/08/2011 1:42:27 PM PDT by Semper911 (When you want to rob Peter to pay Paul, you'll always have the support of Paul.)
[ Post Reply | Private Reply | To 13 | View Replies]

To: GOPJ

Good ol’ Southern Country Boys............


35 posted on 07/08/2011 1:43:07 PM PDT by Red Badger (Casey Anthony: "Surprise, surprise."...............)
[ Post Reply | Private Reply | To 27 | View Replies]

To: sinanju

“Hardly the same thing.”

Uhhhhh! I know that! But he would have enjoyed it immensely. Right up his alley, so to speak. And probably would have come up with the tech a long time ago!


36 posted on 07/08/2011 1:45:13 PM PDT by Dr. Bogus Pachysandra ( Ya can't pick up a turd by the clean end!)
[ Post Reply | Private Reply | To 15 | View Replies]

To: Semper911

Awesome!.................


37 posted on 07/08/2011 1:48:03 PM PDT by Red Badger (Casey Anthony: "Surprise, surprise."...............)
[ Post Reply | Private Reply | To 34 | View Replies]

To: Red Badger

Cool!

I know of ham radio operators that sometimes have a little led attached to their antennas that lights up from the electricity in the air.

I’m still amazed after 30 years of building crystal radios that I can receive a station three hundred miles away and the radio is powered by the electricity coming from that station.


38 posted on 07/08/2011 1:48:31 PM PDT by PATRIOT1876 (The only crimes that are 100% preventable are crimes committed by illegal aliens)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

The Earth has been likened to an electrical generator.

The Earth possesses a molten metal core and spins on its axis, and as the solar wind’s electrically charged particles flow against the planet, this plasma interacts with the planet’s magnetic field lines extending from pole to pole and streams out into space.

Too bad we haven’t figured out how to exploit that energy source for near-earth space propulsion.


39 posted on 07/08/2011 1:49:01 PM PDT by SatinDoll (NO FOREIGN NATIONALS AS OUR PRESIDENT!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Red Badger

The tech is cool. The function however is THEFT.

No different than a banking system hacker who catches the round-down of fractional cents. It’s still stealing.

I remember a chicken farmers who buried some parasitic lines under a hi voltage transmission line running through his farm. He used the power to heat the chicken coops. IIRC, he was arrested, fined and had to pay for the power he took.

That farmer was doing the same kind of thing as this Professor.


40 posted on 07/08/2011 1:51:20 PM PDT by bvw
[ Post Reply | Private Reply | To 1 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-73 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson