To: TheOldLady; Cyber Liberty; CatherineofAragon; melissa_in_ga; Slings and Arrows; ...
This is the current state of the post: This election has been stolen. Pure and simple.
Now we must show the world, before December 13th when the Electors are appointed, and before the Special Elections occur for various runoffs that will happen (for example, in Georgia, for the Senate seats, on January 5th.
How did it occur, you may ask.
It was twofold: One, certain ballot counting machines were altered to give a particular percentage advantage to Joe Biden. It would subtract votes from Donald Trump, and give them to Joe Biden. These machines are provided by a company owned and managed by the Clintons and / or the Obamas. That company is called Dominion Voting Systems. There are various models of the vote tabulation machines. There is a rumor that the software is called Hammer and Scorecard, but it is meaningless what the software is called, more important is its function, described above.
The night of the election, it was becoming apparent to the powers that exist in the Democrat Party that the software boost would not be enough. Donald Trump was racking up very substantial leads, enough to swamp the artifically-inflated advantage to Biden that the software was creating. Suddenly, various excuses emerged on why certain precincts in swing states needed to stop counting. Those precincts sent Republican observers home, with the promise the precincts would continue that next morning. In Georgia, those precincts were, at least in-part:
Fulton 03D
EP04C
SC15A
SC17B
03P2
04A
JC01A
SC08G
01I
CP04A
Not Reporting CP084
Not Reporting SC08H
Not Reporting UC01D
Fortunately, yours truly happened to record those precints, again in-part, and their status, on the morning of November 4
th, in a thread located here:
Georgia Fraud Watch informationTHE FIRST COMPONENT OF THE STEAL
The first component of The Big Steal is the vote counting machines. Certain machines were altered to undercount Trump votes and overcount Biden votes. We do not know the exact percentage of vote conversions, but whatever it was, the Democrat Powers believed it would be enough to take Biden over the top in several swing-states. Those states are: Michigan, Georgia, Arizona, Wisconsin, and Missouri. There are other states that use this software, but they do not seem to have been terribly effected.)
Here is as much proof as I can provide. I want good Freepers to provide as much additional proof as possible downthread.
- A poll watcher saw someone put an update on the Dominion Voting System computer JUST before the voting and tabulation began happening. That late of an update does not provide Republican experts the chance to review the code for fraudulent counting algorithms, and besides, one would need to see the code. I have found an article detailing this very suspicious computer update: Update (1100ET): Further down the 'Domminion Voting System' rabbit-hole, Politico reports that a technology glitch that halted voting in two Georgia counties on Tuesday morning was caused by a vendor uploading an update to their election machines the night before, a county election supervisor said.
- An election clerk in Michigan discovered that the vote total counted by the software did not match the printed tabulator tapes.
- FULTON COUNTY, Ga. (WTOC) -Georgia Secretary of State Brad Raffensperger released a statement on Twitter Saturday announcing that Fulton County has discovered an issue involving reporting from their work on Friday.. Reportedly, that 'issue' has caused incorrect totalling of ballots to occur in certain counties, most notably Chatham and Fulton.
- In the same state, Georgia, one of the updates was submitted on November 6th: 8:45 p.m. | Computer malfunctions in Gwinnett have meant that everyone has gone home except the IT folks.
Unsupervised. Only the IT people. No Republican observers. Im IT, and I'm very uncomfortable with that. This was in Gwinnett county. - from thedonald.win: Dominion software not digitally signed? If true, any bad actor could update. Send to sydney Powell.
Source - Five Milwaukee wards with 80-90% turnout. Normally its 60-70%. Not sure what if anything could be proven. They have same day voting. Not sure what proof of ID is required.
Source
THE SECOND COMPONENT OF THE STEAL Once it became obvious that the software intended to switch a number of votes from Trump to Biden was simply insufficient to overcome Trump's natural lead, the swing states targeted by the Democrat Powers swung into action.
- Within hours of one another, these swing states began claiming they needed to stop counting until the next morning.Yet, obviously, after the Republican observers foolishly believed these people, the counting ramped up with no Republican observers present.
- In Michigan, they closed the counting before midnight (Note, I could use proof of time), promising to reconvene at 9AM. Yet, these same people submitted new counts at 3AM -- impossible, if they stopped counting. Here is the proof of the Michigan 3AM vote injection.
- Michigan's corrupted vote counters spent the interim manufacturing these Biden ballots, 100% of which were for Joe Biden, but ONLY Joe Biden. NO downticket votes. These corrupt workers did not have the time to mark the downtickets. They were under extremely tight timeframes.
- Interestingly, Snopes and all the other 'false' fact checkers state that the jump was because of a typo. The number, according to them, should have been 153,710 Biden, 23,154 Trump..
NOT STATISTICALLY POSSIBLE. As late as January of 2019, the BBC reports: "Because Michigan voters arent required to register their party affiliation, theres no way to know for sure how many Democrats versus Republicans live in Shiawassee County. However, county leaders have said they believe the political makeup here is roughly split evenly between Republicans and Democrats."
- Again in Michigan, there were confirmed reports that Republican poll watchers were instructed to stand 100 feet from the counters, and had their vision blocked by people paperi
- In Georgia, the same shutdown occurred at 10:30 PM. Republican observers were sent home, proof of which is here. Though the counting was supposed to have stopped at 10:30 PM, vote counts SHARPLY jumped for Democrats between 1:00 AM and 2:00 AM, proof of which can be seen here.
- Again in Michigan: "Poll observer in Michigan reports that on Election night at 4 am, 61 boxes were unloaded from a van but counting, which had been stopped about 1 am, was not restarted and observers went home at 5 am. When she looked at TV at 7 am, it was reported that there were 100,000 additional votes counted from that center. She said highly questionable as the center only processed 7000 votes during the prior hours of the shift (about 3-4 working hours). Video of interview here:
- In Wisconsin: "Ive been looking at the vote counts in Milwaukee, and theres suspicious patterns in the data that need explaining. Proving fraud is difficult, but a lot of irregularities point in that direction. First, the tl;dr.
1. Democrat votes started increasing massively relative to Republicans after Tuesday night counts. This cant be accounted for by explanations like heavily Democratic wards reporting later. When we look at the changes *within wards*, 96.6% of them favored the Democrats.
2. Democrats also improved massively against third party candidates, but Republicans and third party candidates are similar to each other. Since theres little incentive to manipulate third party counts, the big change is in Democrat votes, not in Republican ones.
3. In down ballot races, Democrat increases within each ward were larger where the Democrat candidate was initially behind in the overall race on Tuesday night i.e. relatively more Democrat votes appeared in races where they were more likely to alter
4.This result is easy to explain by fraud, but is more complicated under other explanations like Democrats mostly voting by mail. Most theories predict all Democrat candidates should benefit equally within a ward, not that more votes come in exactly where theyre needed.
Ward-level vote counts are from the Milwaukee County Clerk at 7pm Thursday night (county.milwaukee.gov/EN/County-Cler
) and the archived version from the count as it stood on election night (web.archive.org/web/2020110404
).
Archived twitter thread here
- Heres a list of 10,000 people that are confirmed deceased (cross referenced with Social Security Death Index) that requested and returned absentee ballots in Wayne County. Are these all clerical errors too?
- In Gwinnett County, GA: "So my very final question is thus: How in the world were there not only 230,369 MORE BALLOTS than registered voters, but 124,628 MORE BALLOTS than there are adults in Gwinnett County?" Source Data to come to this conclusion
- In Georgia: " Another county in Georgia has reported encountering a glitch, which has caused a delay in the counting of thousands of votes in the 2020 presidential election. A glitch in software has caused a delay in vote-counting in Georgias Gwinnett County, according to a report by Fox 5 Atlanta. Election officials estimate that roughly 80,000 absentee ballots were impacted by this glitch, yet decided to push the impacted votes through, knowing some of the votes would likely change. Gwinnett County uses Dominion Voting Systems, the same election software that glitched for Georgias Spalding and Morgan Counties on Tuesday morning, causing machines to crash on Election Day. The Georgia counties use the same software as Michigans Antrim County, which also experienced a glitch. The glitch in Antrim County caused thousands of ballots that were meant for Republican candidates to be wrongly counted for Democrats in the county. Antrim is also one of 47 counties in Michigan that uses the same software that experienced this glitch. The presidential election results for Antrim County were later corrected, flipping the county from Joe Biden to President Donald Trump after the glitch was fixed. Georgias Gwinnett County said in a statement to FOX 5 News: In an effort to expedite the complete count of the remaining Gwinnett County General and Special Election votes, the County, with assistance from Dominion Voting Systems technicians, will revisit the batches of absentee by mail ballots that were added to the Election Night totals without being fully adjudicated. LINK NEEDED ____________
- In Pennsylvania: Delaware County, PA. Two workers literally filling out ballots. This thing is so crooked.... Michael Welling (@WellingMichael) November 7, 2020 https://twitter.com/TheCaliforniaP3/status/1324579251710959616
- Have you all seen this video posted on Twitter? I apologize if it has already been forwarded. It shows an exact switchover of 19,958 Trump Pennsylvania votes to 19,958 Biden votes within 40 seconds. The video opens with the PA total and ends with the "updated" PA total. (I believe this is John King of CNN but am not sure.) https://twitter.com/Miraforanimals/status/1325561965691940864?s=20
- Detroit, Michican: Recorded evidence of Detroit poll workers being trained to commit fraud. https://streamable.com/6ispgo
- Warning: COMPLEX: Data scientist analyzes Biden/Trump votes. Fraud stands out in mail-in ballots. https://uploads.disquscdn.com/images/89641c1f5c7882c7a7c89b9eab8e335fd2effd815ddce54dc022867b14aa1698.gif
177 posted on
11/08/2020 4:02:05 PM PST by
Lazamataz
("We beat the Soviet Union, then we became them." - 2005, my quote. I never knew how prescient I was.)
To: Lazamataz
RE: machine updates. That’s just not something that would be done mid election. You can see here TX testing of dominion machines and it lists every single hardware and software version number of everything; https://www.sos.texas.gov/elections/laws/dominion.shtml
Might be worth checking the states in question and see what their Dominion machine testing process was and any agreements, processes or rules they had for usage when they approved the machines. Did they violate their own rules or laws with the update?
184 posted on
11/08/2020 4:16:11 PM PST by
Pollard
(You can’t be for “defunding the police” and against “vigilantism” at the same time.)
To: Lazamataz
Great stuff, Laz! Great work. Thank you, on behalf of all Georgia patriots — and Trumpians. You’ve given me confidence Georgia is going to beat this fraud!
In Clarke County (Athens City) where I live and voted, we had a new ballot system that I’d never seen before. [You’d think that the State or City government would explain these things ahead of time — but that complaint is for another day.]
The voting system had me use a computer display where I used a pen to make selections. Then when I finished, a printer next to the display printed out a card-stock white ballot (8.5 x 11 inches) with the names of people I voted for printed on it.
I then walked over to a clerk and she supervised me as I inserting my ballot (printed side down) into a large electronic-looking box with an automated insertion feed. And the clerk told me this was a locked box.
My question (for anyone who knows) — how was my printed ballot in that box used and guarded? Did the electronic machine I made my selections on feed my result into a separate software system? Was that used to count my vote?
Or was the printed ballot itself used to count my vote by machine reader?
Thanks...
197 posted on
11/08/2020 4:47:25 PM PST by
poconopundit
(Hard oak fist in an Irish velvet glove: Kayleigh the Shillelagh we salute your work!)
To: Lazamataz
Great stuff, Laz! Great work. Thank you, on behalf of all Georgia patriots — and Trumpians. You’ve given me confidence Georgia is going to beat this fraud!
In Clarke County (Athens City) where I live and voted, we had a new ballot system that I’d never seen before. [You’d think that the State or City government would explain these things ahead of time — but that complaint is for another day.]
The voting system had me use a computer display where I used a pen to make selections. Then when I finished, a printer next to the display printed out a card-stock white ballot (8.5 x 11 inches) with the names of people I voted for printed on it.
I then walked over to a clerk and she supervised me as I inserting my ballot (printed side down) into a large electronic-looking box with an automated insertion feed. And the clerk told me this was a locked box.
My question (for anyone who knows) — how was my printed ballot in that box used and guarded? Did the electronic machine I made my selections on feed my result into a separate software system? Was that used to count my vote?
Or was the printed ballot itself used to count my vote by machine reader?
Thanks...
198 posted on
11/08/2020 4:47:42 PM PST by
poconopundit
(Hard oak fist in an Irish velvet glove: Kayleigh the Shillelagh we salute your work!)
To: Lazamataz
To: Lazamataz
Very, very fine work Sir, I salute you.
370 posted on
11/09/2020 12:51:37 AM PST by
Bullish
(CNN is what happens when 8th graders run a cable network.)
To: Intar
371 posted on
11/09/2020 12:52:43 AM PST by
Bullish
(CNN is what happens when 8th graders run a cable network.)
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson