Posted on 10/29/2009 4:35:47 PM PDT by TigerLikesRooster
U.S. Stops Short of Linking Chinese Drywall to Health Problems
By MELANIE TROTTMAN
WASHINGTON -- Federal product-safety regulators stopped short of linking Chinese-made drywall to health problems and metal corrosion, according to people familiar with results of an investigation scheduled to be released later Thursday.
The regulators have determined that sulfur gases emit from Chinese drywall at a higher rate than non-Chinese product, according to the results. But the officials said they need to conduct more studies to determine any connection to health problems or damages.
Federal regulators are expected to caution that the results are early stage and could change. Later Thursday they are to release results from three studies of the drywall investigation, including an indoor air test of 10 homes in Florida and Louisiana. Next month the results of a 50-home indoor-air-testing study will be released.
(Excerpt) Read more at online.wsj.com ...
THEY KNOW WHO THE *REAL* BOSS IS, YEP..!!
Oh please. The same drywall that corroded the brand new electrical wiring in people’s houses? Just imagine if it does that to wires, just what does it do to your lungs.
How about the government’s connection to the fact that alot of this drywall was used in homes rebuilt in New Orleans, and paid for by the U S Government. ??
Moisture corrodes steel and causes dried edibles to rot. Oxygen and sunlight cause rancidity. Imagine what these things will do to your lungs.
The FDA tried to cover up the poisoned dog food business, too. If a group of veterinarians hadn’t broken cover and come out with the story, we probably never would have been told about it. Or about any of those other poisoned products.
It’s not just the T-bills. It’s also all those big importers who pay off the politicians.
All drywall contains sulfur, in fact is sulfur. The unmentioned but all important question. Did the material meet ANSI and or ASTM standards? If yes, no foul. If no then what did the project specifications section 9 require? Did the drywall contractor comply? If yes, no foul.
maybe someone could have it privately tested
Moisture and oxygen, sure. But if you’re getting sunlight on your lungs, you’ve got bigger short term problems.
I wonder if the issue is in natural gypsum wallboard
or some of that made from synthetic (FGD) gypsum...
None of the articles I have read seem to make any distinction.
My bad - I threw in sunlight at the last minute, when I should have mentioned it in reference to its non-harmful effects (in moderate amounts) on skin.
Sulfate is not sulfur. Sulfate is fully oxidized sulfur, S6+, and it's stable. The junk board sent over by the Chicoms is emitting sulfide, reduced sulfur(S2-) as the gas H2S. That gas is a neurotoxin and corrodes metals. It was probably generated by sulfate reducing bacteria when the Ca SO4 was stored wet over there and on the way over. This junk board also seems to contain sulfides as a part of the matrix. That's uncommmon.
"Did the material meet ANSI and or ASTM standards?"
Do they have a stench spec?
their new corporate logo...
Obviously the pockets of the Chinese drywall manufacturers are not as deep as, say, the paint manufacturers in the good old USA! (Billions of dollars bilked from THAT industry over bogus data about kids eating paint chips off of their walls...)
When I was a kid, we spread mustard on asbestos shingles and ate them and WE LIKED IT! (LOL!)
Dorks.
I thought the Chinese ground up a lot of drywall and put it in dog food that they sold to Americans? ;)
SECTION 092900 - GYPSUM BOARD
PART 1 - GENERAL
1.1 SECTION REQUIREMENTS
A. Submittals: Product Data.
PART 2 - PRODUCTS
2.1 PERFORMANCE REQUIREMENTS
A.Fire-Resistance-Rated Assemblies: Provide materials and construction identical to those tested in assemblies per ASTM E 119 by an independent testing and inspecting agency acceptable to authorities having jurisdiction.
STC-Rated Assemblies: Provide materials and construction identical to those tested in assemblies per ASTM E 90 and classified per ASTM E 413 by a qualified independent testing and inspecting agency.
2.2 PANEL PRODUCTS
A. Provide in maximum lengths available to minimize end-to-end butt joints.
Interior Gypsum Board: ASTM C 36/C 36M or ASTM C 1396/C 1396M, in thickness indicated, with manufacturer’s standard edges.
Entire subdivisions in my area have gone bankrupt in my area due to Chinese drywall. Million-dollar McMansions are sitting empty in Country-Club gated communities, and some of my own little students have gotten very sick from this stuff. I don’t blame the homebuyers, as they don’t strip off the paint and wallpaper to see if the drywall was “MADE IN CHINA”. It was the developer who originally purchased this stuff. I am sure there are plenty of AMERICAN drywall companies. This disgusts me!
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.