BlackLight Power Announces Generation of Millions of Watts of Power

BlackLight Power, Inc. Announces the Game Changing Achievement of the Generation of Millions of Watts of Power from the Conversion of Water Fuel to a New Form of Hydrogen

BlackLight Power, Inc. (BLP) today announced that it has produced millions of watts of power with its breakthrough Solid Fuel-Catalyst-Induced-Hydrino-Transition (SF-CIHT) patent pending technology in its laboratories.

Using a proprietary water-based solid fuel confined by two electrodes of a SF-CIHT cell, and applying a current of 12,000 amps through the fuel, water ignites into an extraordinary flash of power. The fuel can be continuously fed into the electrodes to continuously output power. BlackLight has produced millions of watts of power in a volume that is one ten thousandths of a liter corresponding to a power density of over an astonishing 10 billion watts per liter. As a comparison, a liter of BlackLight power source can output as much power as a central power generation plant exceeding the entire power of the four former reactors of the Fukushima Daiichi nuclear plant, the site of one of the worst nuclear disasters in history.

Our safe, non-polluting power-producing system catalytically converts the hydrogen of the H2O-based solid fuel into a non-polluting product, lower-energy state hydrogen called “Hydrino”, by allowing the electrons to fall to smaller radii around the nucleus. The energy release of H2O fuel, freely available in the humidity in the air, is one hundred times that of an equivalent amount of high-octane gasoline. The power is in the form of plasma, a supersonic expanding gaseous ionized physical state of the fuel comprising essentially positive ions and free electrons that can be converted directly to electricity using highly efficient magnetohydrodynamic converters. Simply replacing the consumed H2O regenerates the fuel. Using readily-available components, BlackLight has developed a system engineering design of an electric generator that is closed except for the addition of H2O fuel and generates ten million watts of electricity, enough to power ten thousand homes. Remarkably, the device is less than a cubic foot in volume. To protect its innovations and inventions, multiple worldwide patent applications have been filed on BlackLight’s proprietary technology.

This breakthrough transformational power technology can be witnessed in a live demonstration hosted by BlackLight of on January 28th at 11 AM. Details and updates will be posted at the company website (http://www.blacklightpower.com/). Those interested in attending can contact BlackLight to preregister for this limited availability event.

Applications and markets for the SF-CIHT cell extend across the global power spectrum, including thermal, stationary electrical power, motive, and defense. Given the independence from existing infrastructure, grid in the case of electricity and fuels in the case of motive power, the SF-CIHT power source is a further game changer for all forms of transportation: automobile, freight trucks, rail, marine, aviation, and aerospace in that the power density is one million times that of the engine of a Formula One racer, and ten million times that of a jet engine. The SF-CIHT cell uses cheap, abundant, nontoxic, commodity chemicals, with no apparent long-term supply issues that might preclude commercial, high volume manufacturing. The projected cost of the SF-CIHT cell is between $10 and $100/kW compared to over one hundred times that for conventional power sources of electricity.

BlackLight’s previously reported pioneering solid fuels and CIHT electrochemical cell use the same catalyst as the newly invented SF-CIHT cells, and they served as a model for Dr. Mills to invent the breakthrough plasma producing SF-CIHT cell. These background technologies have been validated by industry. BlackLight’s results of multiples of the maximum theoretical energy release for representative solid fuels was replicated at Perkin Elmer’s Field Application Laboratory at their facility using their commercial instrument. Moreover, our advanced CIHT electrochemical cell was independently replicated offsite as well.

“We at The ENSER Corporation have performed about thirty tests at our premises using BLP’s CIHT electrochemical cells of the type that were tested and reported by BLP in the Spring of 2012, and achieved the three specified goals,” said Dr. Ethirajulu Dayalan, Engineering Fellow, of The ENSER Corporation. “We independently validated BlackLight’s results offsite by an unrelated highly qualified third party. We confirmed that hydrino was the product of any excess electricity observed by three analytical tests on the cell products, and determined that BlackLight Power had achieved fifty times higher power density with stabilization of the electrodes from corrosion.” Dr. Terry Copeland, who managed product development for several electrochemical and energy companies including DuPont Company and Duracell added, “Dr. James Pugh (then Director of Technology at ENSER) and Dr. Ethirajulu Dayalan participated with me in the independent tests of CIHT cells at The ENSER Corporation’s Pinellas Park facility in Florida starting on November 28, 2012. We fabricated and tested CIHT cells capable of continuously producing net electrical output that confirmed the fifty-fold stable power density increase and hydrino as the product.”

The disclosure of one of BlackLight’s patent application that was recently-filed worldwide, its 10 MW electric SF-CIHT cell system engineering design and simulation, high-speed video of millions of watts of supersonically expanding SF-CIHT cell plasma, The ENSER Corporation and Dr. Terry Copeland validation reports on the prior generation CIHT electrochemical cells, and the Perkin Elmer report on solid fuels are publicly available on BlackLight’s webpage (http://www.blacklightpower.com/). Technical papers by BlackLight providing the experimental tests of plasma to electric conversion, results of excess energy production from solid fuels, results of continuous electricity production at fifty times higher power density than prior generation CIHT electrochemical cells, and the detailed chemistry and identification of Hydrinos by ten analytical methods that laboratories can follow and replicate are given at http://www.blacklightpower.com/.

BlackLight Power, Inc. is the inventor of a new primary energy source applicable to essentially all power applications such as thermal, electrical, automotive, trucking, rail, marine, aviation, aerospace, and defense. The BlackLight Process, the power source, is the process of releasing the latent energy of the hydrogen atom by forming Hydrinos. The SF-CIHT cell was invented by Dr. Mills to release this energy directly as electricity from water as the only source of fuel.

BlackLight Process: A novel chemical process invented by Dr. Mills causing the latent energy stored in the hydrogen atom to be released as a new primary energy source.

Hydrino: Hydrinos are a new form of hydrogen theoretically predicted by Dr. Mills and produced and characterized by BLP. Hydrinos are produced during the BlackLight Process as energy is released from the hydrogen atom as the electron transitions to a lower-energy state resulting in a smaller radius hydrogen atom. The identity of the dark matter of the universe as Hydrinos is supported by BlackLight’s spectroscopic and analytical results as well as astrophysical observations.

SF-CIHT Cell: Each SF-CIHT cell comprises two electrodes that confine a highly electrically conducive H2O-based solid fuel that serves as a source of reactants to form Hydrinos. A low-voltage, very high current (about one thousand times that of household currents) ignites the water to form hydrinos and cause a burst of plasma power of millions of watts that can be directly converted to electricity using proven plasma to electric power conversion technology such as a magnetohydrodynamic converter.

Magnetohydrodynamic Converter: An electrical generator that uses no moving parts. It comprises a magnet as in a conventional generator, but the conductor that moves in this case is the flowing plasma that produces a voltage at a pair of electrodes that are perpendicular to both the direction of plasma flow and the magnetic field of the magnet.

Photos/Multimedia Gallery Available: http://www.businesswire.com/multimedia/home/20140114005647/en/

BlackLight Power, Inc. Media: Beata Stepien, 609-490-1090 Ex 125 Assistant for Dr. Randell L. Mills bstepien@blacklightpower.com

Kevmo, I see you posted up a storm after everyone went to bed.

“But, next time, try to avoid the bowlsheet of saying that the coal industry sells their crap in Joules per bucket or anything like that. It’s a ridiculous argument. It appears that across the board, from 1W to 1MW, EE’s go into shorthand mode when they say Watts but mean Watt-Hours. But if you think that this means Mouser is shouting “SCAM” by following this shorthand, you’re simply way off.”

Uh, the coal industry does work in BTUs per car load or metric ton, somewhere along those lines. I also happen to be into railroading :) Model railroading in reality, but I love reading some of the real business info about coal, since it is still one of the railroad’s major cargos. Remember, BTUs convert directly to Joules, they are both energy units.

A given coal from a given mine, with a given moisture content, will burn in a boiler and produce X amount of heat energy. Another physics thing you should learn about. The entire system can be expressed in Joules. Because, once again, Joules are energy.

“Here’s a power calculator I generated for the industry:
http://www.sipex.com/files/ApplicationNotes/ThermalCalculator.xls”;

Link doesn’t work, and I wouldn’t trust it if you were the actual author. Sorry, that’s the breaks, given what I have seen of you so far on this forum. Besides, if you really know your stuff, you would know that “power dissipation” is actually based on Joules, since power without a defined delivery time, makes absolutely no sense. It is just expressed in degF/Watt dissipated, to make thermal calculations somewhat easier for the engineer.

“***Then it would appear that your pulse would last at MOST few seconds, not years. That’s all you needed to post. As you say, “Oy! That pretty much explains his knowledge failure, right there in that one sentence.”

Uh, no again. Never seen a coal train stop in a few seconds. Those locomotives use dynamic braking, and they dissipate heat through massive fan cooled power resistors for minutes on end. Even at the lumber mill level, servo trays running 100hp cutting motors across the planks easily stress resistors near continuously.

You see, in thermal engineering, more than the ohm and watt requirement are important. You just haven’t thought big enough, or oversimplified the problem in your head.

“I don’t think you got it any more than the other guy. He says that 1MW means 1MWH, that it’s a short-handed thing in, well, the coal industry. And all of us should know how the coal industry talks about such short hand because, well, coal used to be delivered by hand to each household or something like that.”

It’s you that isn’t getting it. Power systems like generating plants or nuclear reactors are rated for continuous operation. To determine the energy developed by such a system, time MUST BE A FACTOR. Energy without time is instantaneous power, and a absolutely worthless number to have around for a power plant.

“You seem to have gone the exact opposite in terms of your understanding. Are resistors measured in Watts? Or is it Joules? Well??? Where is the “Joule” setting on your multimeter? I thought for a brief instant you actually might know something, but ... sigh... it turns out you’re just as ignorant as many of these other skeptopaths.”

Again, power resistors have everything you need to calculate the limit of energy you can ask them to convert to heat and dissipate. This is Joules. Joules. Why don’t you just go look this term up rather than beating around the proverbial bush? Anything related to thermal dissipation of power, deals with Joules. Yes, electrical resistance is in ohms, but the derating values are VERY VERY REAL. You aren’t going to stop a locomotive with the calculated max watt power resistor for a given resistance. You will melt it down. The resistor has to be able to take the full ENERGY load (which is in Joules) and convert to heat energy.

“Q: How many bandwagons must a skeptopath jump onto before he feels superior to others who have more knowledge than him?

A: You tell me.”

I’ll bite. Zero. Because you have yet to prove that you have more knowledge than me. Though I would say initially I gave you the upperhand on LENR physics, but not anymore. You are just too ignorant on the whole of basic physics.

“Maybe if you answered the questions of how resistors are measured, where the “Joule” setting is on a volt meter, and the power density hypothetical posted, we might think you could make a point. But instead, you seem to persist in your ignorance, as if that were some kind of virtue.”

Once again, I really hope you get an education before working on power electronics.

“Tell ya what. If you answer the power density question, we can get down to whatever units you want to discuss.”

Oh, you want me to bow to the black box Rossi is pushing but can’t demonstrate either commercially or convincingly to a small platoon of 7 scientists? No, won’t be agreeing on that today. Don’t care how many people you scam in intrade, etc. E-Cat is dead, and you know it, even if you can’t admit it. He continues to burn through people’s hard earned money, probably on caviar and fine drink, while building these black boxes that he refuses to allow anyone inside of. Definition of con artist. Just like Blacklight. Patent it, let the secret go. I mean, people would find out anyway. I’d give it 3 hours before a instructable about how to tear down your e-cat would appear on some howto website, if such a thing actually existed at all.

The reason he won’t release is because the free “investment” money ride would be over. No more caviar and champagne.

1 J = 1W*s = 0.000277777778 watts * hour

That you don’t know this is further proof of your lack of any professional knowledge of physics or engineering. I was hoping you’d at least trap me on some nuance or such, but you have nothing. Zilch. Nada. Which means every god you pray too in free energy other than the God of Israel, I definitely mistrust. I guess we are lucky you are so unprepared to forward your thoughts. Probably has saved many from the scams you love forwarding along.

I've been following BLP for a while and the things I don't like about Rossi such as diploma mill PhD (his engineering degree is real) and the Petroldragon and the TE issue are not there for Mills.

I see this thread is over 200 posts, which is great to see this much interest but I think the arguments are correct in that an instantaneous WATTS reading is meaningless since it has to be done over time. But to say that BLP is equivalent to using surplus equipment in grandma's basement is wrong. I can't find the pics of their lab but they have some awesome equipment, as 60 million goes a long ways. I forget who used to own BLP's building but I think it was pratt and whitney and they left behind a lot of state of the art equipment. Below is what the cell looks like and you can see their lab in some of the pics but their website won't let me grab the photos. Having a state of the art lab doesn't mean they have anything but they are well funded and a lot of the criticism of Rossi is that his lab looks like someone's garage and it looks like his equipment was bought from Ebay. I have better equipment than Rossi does, at home. Again, state of the art equipment or not, it is the results that count but I think better equipment allows for better, more accurate experiments and leaves them with no excuse on why they don't measure the power correctly.

CiHT Cell

If you look at the design of this cell, it looks like a fuel cell running backwards or maybe a continuously flowing electrolysis cell but the distance between the electrodes looks small so when they hit it with 12000 amps at 80 some volts, you would think it would overwhelm the insulators and grenade the cell. Anyone ever put a neon lamp across 120 volts without the 33k resister? It explodes in a flash of light, kind of cool but it scared the crap out of me when I was little. I could see the same thing happening here.

What I want to know is what should we look for on this January 28th demo? From the press release it says it's a low voltage high current input and it is D/C as anyone who has made an electrolysis cell knows, not only does it take D/C, it also has to have the correct polarity as the generated oxygen comes from the anode and hydrogen comes from the cathode. I don't see how they create a continuous plasma flow unless there is circulation of the water and how do they use the plasma? It seems to me that creating plasma in a water bath will flash the water to steam instead of into plasma or even hydrogen and oxygen with that much instantaneous current.

I would assume that they have to have a way for the water to flow into the cell and another way to have the plasma go into the magnetohydrodynamic converter but don't they need a vessel that can handle plasma? It seems like once the plasma is generated, they would have the same problem the hot fusion folks do and that is safely containing the plasma without destroying the container or electric generator or having the cooler walls quenching the creation of plasma. From the diagram posted above, they show the insides of the cell but not its container which, due to the reasons above, would seem to be an important part of the cell's design. They also say that the cell, once kicked off, has a self propagating electro-chemical reaction. I don't know if this means they only have to kick start the process and then it runs by itself which should be easy enough to test if true. If you look at the steps from the link above, it says:

1) Assume CIHT is similar to an alkaline fuel cell, except that an electric current is passed through it and an inert atmosphere with trace H2O vapor surrounds the cathode, anode, and electrolyte.

2)Current is introduced, which produces hydrogen and oxygen from the electrolysis of the supplied trace H2O. Then, the cell is discharged for a much longer time than it was charged at essentially the same voltage maintained by the energy released from the hydrino reaction.

3) Nascent H2O is formed at the anode during discharge by oxidation of OH- and reaction with H. Hydrinos are then formed at the anode during cell discharge as a result of the atomic hydrogen reacting with the nascent water that serves as the catalyst to form the hydrinos.

4) When the hydrinos form, energy is given off that causes spontaneous electrochemical reactions to occur at both electrodes that result in a self-propagating electrochemical cycle wherein H2O is converted to hydrinos, electricity, and oxygen. Specifically, oxidation-reduction reactions of H2O involving oxygen and oxygen ion intermediates such as hydroxide, oxides, peroxides, and superoxides are involved in the spontaneous electrolysis of water powered by hydrino formation that in turn result in the formation of catalyst and hydrinos. The equivalent of Steps 1 and 2 occur continuously, except that no electricity has been applied during this process. Power is produced with a large net gain in electricity (e.g. 10X) over that to initiate the spontaneous electricity-producing process.

What exactly is happening? It appears that oxygen, hydrogen, peroxide, hydrinos and super-oxides are formed that are then converted to hydrinos and catalyst. If the catalyst is formed in the first reaction, how can it be a catalyst although it sounds like once the cell is kicked off and the hydrinos are formed with the catalyst, then those are fed back into the reaction so it goes into self-sustain mode? Also, the formation of the hydrinos is apparently where the energy comes from, so what do they do with the hydrinos? Are they done with them after they're formed? It seems that this cell's real product is hydrogen, which is not a bad thing. If there was a way to break water up into its components that doesn't take more power than can be generated by burning the hydrogen, they could then use the hydrogen to power anything that can run on hydrogen and since it seems the reaction is self sustaining, the only input needed would be water but they say the output is the plasma which they use to generate power??? This kind of reminds me of the South Park underwear gnomes.

BLP kind of leaves step two out although I could see them protecting their unique process until they have a patent but that thinking would seem to me to be a problem with production units in that once these things are out in the wild, it should be easy enough to copy the technology if it isn't protected by patent. I don't know what the purpose of the hydrinos is, it sounds like they are created in the cell but what do they do and why are they important? In fact, what exactly is causing a regular looking electrolysis cell to produce hydrinos? What is their secret sauce and where is it; is it a unique metal on the electrodes, is it something in the water? Where is it on the cell diagram?

So, how are they generating power or heat? It says they hit the water fed vessel with 12,000 amps and it turns the water into plasma, then what? The press release says magnetohydrodynamic converter but I only know what that is because Wiki (I know) has a write up and a diagram and they say that the maximum efficiency so far is 30% which is no big deal if the input plasma is almost free :

MHD Generator

What do they do with the plasma after it goes through the MHD? Does it turn back into water?

On one hand I can see them keeping the exact design of their cell secret since they don't have a patent but they do need to let independent people create a test that tells everyone what they are testing for, what results they are looking for and it has to be done over a decent time like a week. If the cell they are using in the January 28th demo is a pre-production cell, then hopefully, they will run it for a long time and have the proper equipment to measure the input power, the output power of the MHD generator and also, what do they do with the leftover reactants?

A few years ago, they used to say that not only were they creating hydrinos, but that they were also creating a unique mineral in the process that has some special qualities. What happened to them?

I can't wait to see January 28th roll around, I would very much like this to be real even though my hopes mean nothing when it comes down to science, I just hope Mill's dream of it being real didn't cause him and his researches to fall for confirmation bias in interpreting their results.

Unfortunately, I don't think that if this is successful that it proves or disproves LENR as the BLP process doesn't sound like LENR. I would like to see some serious funding to either prove or disprove the LENR/LANR effect and to come up with a working theory. The biggest problem is researchers think that if it is real, it will cost them funding on hot fusion or any other researcher's pet projects. There are too many instances of anomalous heat or energy to discount this area of research and it would nice to move LENR to the area of a real technology that we don't yet know the physics of. We know the physics of hot fusion, we just don't have reactors that create more energy than put in. It's the opposite with LENR, we have the experiments but we don't know the theory, yet.

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.