Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

Vanity: Firing new M1 Garand for first time

Posted on 09/23/2011 3:41:03 PM PDT by cavdad

Bought a M1 Garand last weekend and shooting it for the first time tomorrow. Range is supplying military grade ammo this time. In the future where is a good place on the web or in Raleigh, North Carolina to buy military surplus 30-06 ammo?

By the way, the rifle is a Springfield Armory 1954 model with proper cartouche and ordinance stamp. No mismatching stock or parts.


TOPICS: Military/Veterans; Outdoors
KEYWORDS: banglist
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-99 last
To: fireman15

Yep, galena pure or alloyed is getting harder to come by. I have several 5 gallon buckets of WW and couple hundred pounds of pure for frontstuffers on hand.

I gave up on condom bullets for general shooting long ago. Started out with just cast for handguns, but went on to rifle boolits and never looked back. Get great satisfaction when work up an accurate load for a particular cartridge.

Are you over on http://castboolits.gunloads.com/ ?


81 posted on 09/23/2011 8:25:18 PM PDT by Sea Parrot (Democrats creation of the entitlement class will prove out to be their very own Frankenstein monster)
[ Post Reply | Private Reply | To 79 | View Replies]

To: Eaker

Do you still have a face?


82 posted on 09/23/2011 9:38:22 PM PDT by Salamander (Alice Cooper hit me with a stick.)
[ Post Reply | Private Reply | To 61 | View Replies]

To: mylife

Well then GET them for me....:))

We shoot up in the woods or the back yard.

Never been to an official ‘shooting range’ so I have no idea what one is actually like.

We print our own targets [don’t ask] and frequently, a lot of pop cans and milk jugs give their lives for our amusement.

:)

[black walnuts on fence posts and half empty spray paint cans are fun, too]


83 posted on 09/23/2011 9:43:48 PM PDT by Salamander (Alice Cooper hit me with a stick.)
[ Post Reply | Private Reply | To 65 | View Replies]

To: Eaker

OMG.

Himself just had a hang fire in his and we figured Dad had loaded a dud.

The primer was dimpled but that was it.

No bang.


84 posted on 09/23/2011 9:47:23 PM PDT by Salamander (Alice Cooper hit me with a stick.)
[ Post Reply | Private Reply | To 66 | View Replies]

To: Salamander

Welcome to my world.


85 posted on 09/23/2011 10:37:09 PM PDT by mylife (OPINIONS ~ $ 1.00 HALFBAKED ~ 50c)
[ Post Reply | Private Reply | To 83 | View Replies]

To: fireman15
after a couple hours at the range and you can head home and tell your wife you just saved over a $100 by shooting your Garand. ; ) Hey it is the same kind of logic used by politicians who are “cutting the deficit”!

or the same logic she uses to 'save' $100 on her 19th pair of pumps that she bought for $100 on 'sale'...8^}

86 posted on 09/24/2011 5:36:03 AM PDT by Gilbo_3 (Gov is not reason; not eloquent; its force.Like fire,a dangerous servant & master. George Washington)
[ Post Reply | Private Reply | To 69 | View Replies]

To: dools0007world
Every time we went to the range the little PX available to us ran out of Kotex.
As a former Marine ... I'll just bite my tongue :)
87 posted on 09/24/2011 6:06:12 AM PDT by oh8eleven (RVN '67-'68)
[ Post Reply | Private Reply | To 63 | View Replies]

To: Chainmail

You very well might be right about the bolt. After this many years and the shock it is kind of a blur but your explanation is the most logical that I have read.

The cartridge was in multiple pieces. A piece of the rim ended up embedded in my breastbone and had to be surgically removed.


88 posted on 09/24/2011 8:46:35 AM PDT by Eaker ("If someone misquotes you, it's because they know you're right.")
[ Post Reply | Private Reply | To 80 | View Replies]

To: parthian shot

Not that badly considering the damage to the rifle.

It shredded one arm pretty good with about a million pinholes filled with powder. Walking to the range office I left a blood trail that lasted until the next rain storm.

I also had a cut on my chest that wouldn’t heal so I finally broke down and went to a doctor. It turned out that a half inch long piece of the cartridge rim was embedded in my breastbone and was protruding outward so the skin wouldn’t heal.

The worst part was the flinching every time I prepared to fire a rifle. After all of these years I still have a bit of a problem shooting an unfamiliar weapon.


89 posted on 09/24/2011 9:02:22 AM PDT by Eaker ("If someone misquotes you, it's because they know you're right.")
[ Post Reply | Private Reply | To 76 | View Replies]

To: cavdad
When I was in Liberia during one of their ongoing civil wars, we captured an old M-1 that had the following issues:

1. Cosmoline still on weapon signifying that it had never been cleaned since pulled out of storage.

2. The upper hand guard was severely charcoaled from firing so much that the wood burnt from a hot barrel.

3. Two inches at the end of the barrel was split (probably was fired with an obstruction in the barrel).

4. The stock was severely cracked around the butt and was held together with duct tape.

Otherwise it seemed to be in fine mechanical condition. Since I was very familiar with the M-1 and had some 30-06 ammo (also captured), I fired it and it still functioned without complaint. How many rifles could be subjected to that much abuse and still work-damn few.

90 posted on 09/24/2011 9:31:36 AM PDT by fini
[ Post Reply | Private Reply | To 1 | View Replies]

To: Eaker
You were a very lucky man! That shard of brass could've killed you - thank God it didn't.

Many years ago I had to investigate the out-of-battery firing of a Browning .50 caliber machinegun aboard a Navy minesweeper. The Gunner's Mate didn't know squat about the fifty and misheadspaced the puppy (by about 1/2 inch!). A junior seaman was the first up to fire it from a pedestal mount - you'll note that the Gunner's Mate in question didn't test fire it himself - and it blew up, blasting brass fragments all through the poor sailor's groin and upper thighs. He would have bled to death if they hadn't been near a Soviet spy ship out there in the middle Atlantic and the Soviets had a decent surgeon aboard at the time. I had a lot of fun with that investigation!

Firearms are inherently dangerous at both ends - I am very glad you made it..

Semper Fi, Chainmail

91 posted on 09/24/2011 10:11:44 AM PDT by Chainmail
[ Post Reply | Private Reply | To 88 | View Replies]

To: Chainmail

Semper Fi back to you sir and thanks for you service!


92 posted on 09/24/2011 10:50:11 AM PDT by Eaker ("If someone misquotes you, it's because they know you're right.")
[ Post Reply | Private Reply | To 91 | View Replies]

To: Chode

I follow the Gale McMillan (McMillan stocks) approach as discussed on 6mmbenchrest.com. I has a gun bore that was brushed to death and you could actually see and feel the damage. I choose to wear out my barrels by shooting them. Some armorers I knew in service were rapidly against scrubbing the bores of their target pistols. The Gale McMillan, god rest his soul, approach is discussed at length at multiple shooting forums.


93 posted on 09/24/2011 12:00:21 PM PDT by mcshot (The union label was once considered desirable but will now be avoided.)
[ Post Reply | Private Reply | To 6 | View Replies]

To: mcshot
simple cleaning of the barrel between the rounds while you are sighting in the rifle does no damage to the barrel at all... the barrel will be burnished whether you clean it or not, at least this way you are loading of the steel pores with copper and not crap
94 posted on 09/24/2011 12:15:53 PM PDT by Chode (American Hedonist - *DTOM* -ww- NO Pity for the LAZY)
[ Post Reply | Private Reply | To 93 | View Replies]

To: Sea Parrot
Are you over on http://castboolits.gunloads.com/ ?

I use a different pseudonym and I have contributed to a few discussions, but I mostly lurk. I only post there when I feel I have something useful to contribute. I have been in several gas check maker threads because I bought a Freechex through Ebay from a guy named Charlie. He sent me a prototype of his Freechex III and I made a video of it that I put on YouTube. It is an amazing tool. I can make hundreds of gas checks very quickly with it.

I also have a Lee hardness tester that I use for checking the results of my heat treating that I believe I posted on a couple of times.

I started out casting just for pistols too and went on to rifles and have had good results also. It is very satisfying to work up a new load and it is also fun to introduce others to shooting without it costing an arm and a leg. Being a natural born scrounger... it is also fun to go to the range and come back with more brass than what you started with.

95 posted on 09/24/2011 2:56:41 PM PDT by fireman15 (Check your facts before making ignorant statements.)
[ Post Reply | Private Reply | To 81 | View Replies]

To: Gilbo_3
or the same logic she uses to 'save' $100 on her 19th pair of pumps that she bought for $100 on 'sale'...

You don't know how close to the truth that is!

96 posted on 09/24/2011 3:01:22 PM PDT by fireman15 (Check your facts before making ignorant statements.)
[ Post Reply | Private Reply | To 86 | View Replies]

To: mcshot

has = had
rapidly = rabidly

Drat I hate that.


97 posted on 09/24/2011 3:21:46 PM PDT by mcshot (The union label was once considered desirable but will now be avoided.)
[ Post Reply | Private Reply | To 93 | View Replies]

To: fireman15

LOL, when we are out on the ATV’s, Wife can spot scattered brass faster than anyone ever saw.


98 posted on 09/24/2011 5:07:14 PM PDT by Sea Parrot (Democrats creation of the entitlement class will prove out to be their very own Frankenstein monster)
[ Post Reply | Private Reply | To 95 | View Replies]

To: cavdad

The DCM doesnt have any more of the greek ammo in stock?


99 posted on 09/25/2011 4:25:33 PM PDT by Armedanddangerous
[ Post Reply | Private Reply | To 1 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-99 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson