Skip to comments.
Gun Talk Radio 10/20/13
GunTalk Radio ^
| 10/20/13
| Tom Gresham
Posted on 10/20/2013 5:00:25 PM PDT by mylife
~~Come on in and shoot the breeze~~
Gun Talk Radio
10/20/13~~07:00 CST
Listen to the podcast Here
Or the KIDO 580 stream Here
TOPICS: Culture/Society; Miscellaneous; News/Current Events
KEYWORDS: banglist; guncontrol; guntalk; secondamendment; stevestockman; steveworksforyou; talkradio; tomgresham
Navigation: use the links below to view more comments.
first previous 1-20, 21-40, 41-60, 61-70 next last
To: mylife
Very iffy in my K22 Outdoorsman (1930), a modern 617, a Model 18, and M41. Maybe it’s a Smith thing?
To: smokingfrog
I seriously agree.
10w30 better that 10w50 in Alaska works good ,but not in the desert.
Heavy lube does not seem to work in cold climates or desert climates.
42
posted on
10/20/2013 6:14:04 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: mylife
I’ve shot a ton of Thunderbolt in my 10/22 with no problems. Remington Golden Bullets are about the only thing I’ve had problems with.
43
posted on
10/20/2013 6:15:31 PM PDT
by
smokingfrog
( sleep with one eye open (<o> ---)
To: smokingfrog
Has anyone tried Dry Shuffleboard wax? LOL
44
posted on
10/20/2013 6:16:40 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: Tijeras_Slim
What I found yesterday is either the 10/22 has a light firing pin or Remington Thunderbolt has a hard primer.
I suspect The Remington ammo has a hard primer and the tube fed 22 rifles have a meaner firing pin for safety reasons.
Don’t need no bullets in the pipe causing a chain reaction in the tube mag with nose to primer.
This **** gets serious with 44 mag tube fed lever action rifles.
45
posted on
10/20/2013 6:22:46 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: smokingfrog
Welp my 10/22 take down balked at it yesterday.
Maybe it just needs broke in.
At anyrate I got that Nikkon P series scope dial in.
46
posted on
10/20/2013 6:25:43 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: mylife
I heard that; pretty scary if it gets away fro you and sprays rounds all over the place. Major legal problems ensue.
47
posted on
10/20/2013 6:26:13 PM PDT
by
Carriage Hill
(Peace is that brief glorious moment in history, when everybody stands around reloading.)
To: carriage_hill
All I have that could do that is the SKS.
I keep that firing pin channel hosed out with Ezzox.
48
posted on
10/20/2013 6:29:13 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: mylife
Interesting, the only tube fed rifle I have is a 70’s vintage Weatherby Mark XXII. Never shot it with TB’s.
I am in search of a 1873 Winchester clone for Cowboy shooting.
To: smokingfrog
I’ll order a can tomorrow; thanks.
50
posted on
10/20/2013 6:29:41 PM PDT
by
Carriage Hill
(Peace is that brief glorious moment in history, when everybody stands around reloading.)
To: mylife
Maybe there’s a little more headspace on the take-down model.
I watched a YouTube vid one time where a guy measured the rim thickness on a bunch of 22 cartridges and they varied quite a bit. Even on rounds in the same box. When he shot rounds with the same rim thickness, they all grouped together nicely too.
51
posted on
10/20/2013 6:33:49 PM PDT
by
smokingfrog
( sleep with one eye open (<o> ---)
To: Tijeras_Slim
As far as I know, all the old tube fed lever actions were designed to use flat nose lead ammo and hard primers so no hardnose bullet with nose to primer never set off a chain reaction in the tube.
52
posted on
10/20/2013 6:34:35 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: smokingfrog
That could very well be true.
It is adjustable.
53
posted on
10/20/2013 6:35:48 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: All
Tom gives a Hat Tip O’Neil To Tom Foley LOL
54
posted on
10/20/2013 6:37:25 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: mylife
55
posted on
10/20/2013 6:41:30 PM PDT
by
smokingfrog
( sleep with one eye open (<o> ---)
To: smokingfrog
Yes, Nytexan and I attempted to put one in in short order Sat morning.
Its simple but I need a bench and sharp light for my weak old eyes.
NTY had the Volquartsen bolt release but my eyes were weak and there was no bench
You can modify the existing bolt release in a matter of minutes with a simple 1/4” dia round file.
Just grind the little tit out..
http://www.youtube.com/watch?v=yY3BFyknLzo
56
posted on
10/20/2013 6:48:33 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: smokingfrog
Push a couple of pins, grind the tit out, reload the spring and push the pins back in.
Easy Peasy Lemon Squeezy....If you can see what yer doin.
57
posted on
10/20/2013 6:51:49 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: smokingfrog
58
posted on
10/20/2013 6:55:37 PM PDT
by
mylife
(Ted Cruz understands the law, and he does not fear the unlawful.)
To: mylife
59
posted on
10/20/2013 6:55:45 PM PDT
by
smokingfrog
( sleep with one eye open (<o> ---)
60
posted on
10/20/2013 6:58:10 PM PDT
by
smokingfrog
( sleep with one eye open (<o> ---)
Navigation: use the links below to view more comments.
first previous 1-20, 21-40, 41-60, 61-70 next last
Disclaimer:
Opinions posted on Free Republic are those of the individual
posters and do not necessarily represent the opinion of Free Republic or its
management. All materials posted herein are protected by copyright law and the
exemption for fair use of copyrighted works.
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson