The FReeper Foxhole Studies Foxhole and POW Radios - November 6th, 2004

see educational sources

[snippy_about_it]

Lord,

Keep our Troops forever in Your care

Give them victory over the enemy...

Grant them a safe and swift return...

Bless those who mourn the lost.
.

FReepers from the Foxhole join in prayer
for all those serving their country at this time.


...................................................................................... ...........................................

U.S. Military History, Current Events and Veterans Issues

Where Duty, Honor and Country
are acknowledged, affirmed and commemorated.

Our Mission:

The FReeper Foxhole is dedicated to Veterans of our Nation's military forces and to others who are affected in their relationships with Veterans.

In the FReeper Foxhole, Veterans or their family members should feel free to address their specific circumstances or whatever issues concern them in an atmosphere of peace, understanding, brotherhood and support.

The FReeper Foxhole hopes to share with it's readers an open forum where we can learn about and discuss military history, military news and other topics of concern or interest to our readers be they Veteran's, Current Duty or anyone interested in what we have to offer.

If the Foxhole makes someone appreciate, even a little, what others have sacrificed for us, then it has accomplished one of it's missions.

We hope the Foxhole in some small way helps us to remember and honor those who came before us.

To read previous Foxhole threads or
to add the Foxhole to your sidebar,
click on the books below.

Foxhole Radios



by Don Adamson

If you appreciate ingenuity, simplicity, and like instant gratification from your radio projects, then you ought to spend a few minutes building your own foxhole radio.

Foxhole radios were built by GIs in World War II from materials they had easy access to in the field. They usually consist of just a coil and a detector. They use a point detector, the chief component being an ordinary razor blade.

Justin Garton wrote a letter to the editor of QST, printed in the October 1944 issue:

Here is some more information on the foxhole radio sets used by the boys on the Anzio beachhead. In the daytime they could receive stations from Rome and at night Nazi propaganda "jive" programs from Berlin. Here is the diagram:



In the "Strays" section of QST for July, 1944, another mention is made of the razor blade foxhole radio:

According to Toivo Kujanpaa, a licensed ham op stationed on the Anzio Beachhead, several of the radio men there rigged up a field version of a "crystal" set using a razor blade for a detector. Their efforts were rewarded by the reception of a "jive" program (along with some German propaganda) aimed at the American forces from an Axis station in Rome.

Note the simplicity of the design. Parts were assembled on a piece of wood, usually held in place with thumbtacks. The safety pin is anchored at one end and placed so the point may be moved around on the surface of the razor blade. According to an article in Popular Mechanics of October, 1944, the blued steel surface of the blade gives the rectifying action needed for detection without crystals.

Someone soon figured out a better way to use the razor blade detector: use a pencil lead point on the razor blade (Mr. Garton attributes this innovation to a ham in New York).

I built a foxhole radio in a few minutes using the previous diagram, but I used a pencil point. I fashioned a safety pin shape out of stiff wire, then tied about an inch of pencil lead to it with finer wire. The radio worked the first time I tried it. Of course, with a fixed coil I received only one station.



The design below came from a submission by Lt. Paul M. Cornell in the September, 1945 issue of QST; he used it in the South Pacific. The photograph shows a similar radio built by Don Menning; he simply stuck the whole tip of a pencil on the end of the safety pin.



Here is the parts list for the schematic based on Lt. Cornell's submission:

(A) Antenna connection. This nail also fastens the coil form to the baseboard.

(B) Baseboard. 4 inches square, ¼ inch thick.

(C) Coil form. Wood block, 3¾ inches long, 2 inches wide and ¼ inch thick.

(D) Area of coil scraped clean along arc of switch arm.

(G) Ground connection. This nail also fastens coil form to baseboard.

(J) Jacks for 'phones. Paper clips held down by tacks.

(P) Detector. Pencil lead wrapped with copper wire and resting lightly on razor blade. Some adjustment of the location and pressure of the lead on the blade may be required.

(R) Razor blade held down and connected to wire by tack.

(S) Screw or nail for pivot of switch arm.

(SA) Switch arm made from paper clip.

(T) Thumbtack, or any kind of tack.

(W) Coil winding, approximately 175 turns No. 26 insulated wire.

In October of 1962, Popular Mechanics ran a construction article by Joe Tartas which was almost identical to the above design. Mr. Tartas noted that GIs used their bayonets buried to the hilt in moist earth for a ground connection. You probably do not want to use your vintage WWII bayonet in this manner unless you're a stickler for authenticity!

As with any radio of this type, a good ground and a long antenna (50 to 100 feet) will give you best results. Don't expect room-filling sound, but do expect a lot of fun from very little effort!

The only part of a foxhole radio you don't build from scratch is the 'phone. However, if you're really looking for a radio project built entirely from scratch, you could try your hand at building one.

If you take apart a 'phone, you'll notice they're very simple in construction. Basically, there's a coil with a small iron core. Electrical variations in this coil generate a magnetic field used to attract and repel a metal plate. This vibrating plate produces the (faint) sound you hear.

The March 1, 1994 issue of The Xtal Set Society Newsletter carried an article by Nyle Steiner describing how to build your own home-brew 'phone. Nyle used a coil made from 7000 turns of 0.004 inch wire around a ¼ inch rod. For more information, check out this article, or experiment on your own!

Disclaimer: Working with antennas and electrical devices (especially old ones) can be dangerous, and mistakes can be fatal. If you decide to work with such things, it is solely your responsibility to work safely and to know what you're doing. -DJA

---

---

FReeper Foxhole Armed Services Links

[alfa6]

Hi manna

Regards

alfa6 ;>}

[Diver Dave]

Hi Ho, Hi Ho, it's off to paint we go. :-)

And leading the pack is "Doc."

Doc was the official logo of my ship, the USS PIEDMONT (AD-17).

[Denver Ditdat]

Denver Ditdat: this is a great thread ... please use your HAM ping list.

Thanks for the ping, this is outstanding stuff! Ham ping going out...

[Denver Ditdat]

Ham Radio Ping List

Please Freepmail me if you want to be added to or deleted from the list.

[Victoria Delsoul]

Hi everybody.

[snippy_about_it]

Thank you Neil. I'm amazed at the ability of these folks.

[snippy_about_it]

wish I could put in a few hours painting

I wish you could too. We've been "cutting" all morning and my hands ache! Taking a little break, catch up on pings and back we go.

[snippy_about_it]

Good afternoon Aeronaut.

[snippy_about_it]

Good plane for this weekend.

So far there is more paint on the walls than on us, but we haven't started rolling yet. ;-)

[snippy_about_it]

But I bet her school would frown on the knife and bayonet.

LOL. I'm sure they would.

I would be tempted to tell the teachers to keep their personal political 'feelings' out of the classroom!

[snippy_about_it]

Good afternoon manna.

[snippy_about_it]

Good afternoon aomagrat.

[snippy_about_it]

Hi feather. Taking a break during our painting chores.

[snippy_about_it]

Gloat
Al Gore claims that since he actually won in 2000, America just re-elected *him*.

Yeah we elected him as "Still a LOSER".

[snippy_about_it]

Good afternoon Mayor.

[snippy_about_it]

Dahdidah Didah Dahdahdahdahdit

Yikes, it's all greek to me!

:-)

[snippy_about_it]

:-)

[Soaring Feather]

Drinking StarBucks, snippy??

I am packing up my boxes for the troops. I have three of them. I am also, adding an inventory list of contents for each box. They will be sent out Monday.

This makes me happy to help our troops.