Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Liberty Safe Scandal: Parent Company Exposed as Major Donor to Gun-Control Democrats - Report
Western Journal ^ | September 10, 2023 | Carson Choate

Posted on 09/10/2023 2:16:49 PM PDT by george76

Liberty Safe, which describes itself as “America’s #1 heavy-duty home and gun safe manufacturer,” has come under fire after a report revealed that its parent company has donated almost half a million dollars to pro-gun control Democratic officials.

On Wednesday, Turning Point USA founder Charlie Kirk shared FEC filings on the social media platform X, formerly known as Twitter, that show Liberty Safe’s parent company, Monomoy Capital Partners, has donated hundreds of thousands of dollars to Democrats.

“I pulled the FEC reports on the company and found approximately $400,000 over the last 10 cycles of max donations to Democrats,” Kirk wrote.

...

“Liberty Safe’s current CEO, Justin Hillenbrand, was a founding partner of Monomoy and donated $4,600 to Obama for America,” Kirk added.

In a news release Monomoy Capital issued announcing its acquisition of Liberty Safe in 2021, it called the move “another great example of Monomoy partnering with a branded, market leading, consumer products manufacturer that has garnered an enthusiast customer base throughout the company’s history.”

...

Among the many donations listed, the most notable were to Democratic Sens. Raphael Warnock of Georgia, John Fetterman of Pennsylvania and Mark Kelly of Arizona, and former Lt. Gov. Mandela Barnes of Wisconsin – all of whom have expressed support for gun control.

...

Liberty Safe is already facing fierce backlash for giving the FBI the passcode to a customer’s safe.

...

Liberty Safe voluntarily gave the FBI the passcode to get into the safe, despite the fact that there was no court order requiring the company to do so

(Excerpt) Read more at westernjournal.com ...


TOPICS: Business/Economy; Crime/Corruption; Extended News; News/Current Events; Politics/Elections
KEYWORDS: 2a; 2ndamendment; armedcitizen; assistantdemocrats; banglist; democrats; gun; guncontrol; guns; gunsafe; kaba; libertysafe; rkba; safe; secondamendment; selfdefense
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-72 next last
To: Pontiac

👍


41 posted on 09/10/2023 4:55:08 PM PDT by stevio (Fight until you die.)
[ Post Reply | Private Reply | To 35 | View Replies]

To: ChildOfThe60s

Changing the locks on a new house has nothing to do with this.

If you buy a new car do you replace the ignition and get new keys cut? Nope.

This guy our used the safe. It was his. Liberty had no business doing what they did.


42 posted on 09/10/2023 4:55:25 PM PDT by qaz123
[ Post Reply | Private Reply | To 40 | View Replies]

To: DesertRhino

Agree.


43 posted on 09/10/2023 4:55:50 PM PDT by qaz123
[ Post Reply | Private Reply | To 23 | View Replies]

To: Pontiac

My last safe was special ordered with a mechanical dial lock. Seems they ship everything with electronic locks now.

Did not trust them, and ended up having my new lock “slip a wheel” and lock be out after a few months. Got it open with rubber mallet tapping and had a new dial installed.

They are EMP proof, but not absolutely faultless. Been thinking of getting a dual elect/mech lock.

yes, it is a Liberty and the tech set the combo of the new lock to the same as the original, which Liberty has, even for mech locks.


44 posted on 09/10/2023 5:03:38 PM PDT by doorgunner69 (When tyranny becomes law, rebellion becomes duty)
[ Post Reply | Private Reply | To 35 | View Replies]

To: doorgunner69
yes, it is a Liberty and the tech set the combo of the new lock to the same as the original, which Liberty has, even for mech locks.

Are you saying the Combination is not user adjustable.

If so I would buy a different safe.

45 posted on 09/10/2023 5:09:17 PM PDT by Pontiac (The welfare state must fail because it is contrary to human nature and diminishes the human spirit.)
[ Post Reply | Private Reply | To 44 | View Replies]

To: Pontiac

Yes, you can reset it, or have a locksmith do it.
On the news of Liberty getting cosy with the FIB, I am buying a combo reset tool and will change mine myself.


46 posted on 09/10/2023 5:18:01 PM PDT by doorgunner69 (When tyranny becomes law, rebellion becomes duty)
[ Post Reply | Private Reply | To 45 | View Replies]

To: doorgunner69

I recommend a safe with a mechanical dial lock. A locksmith can help you change these combinations.


47 posted on 09/10/2023 5:21:55 PM PDT by Vaquero (Don't pick a fight with an old guy. If he is too old to fight, he’ll just kill you. )
[ Post Reply | Private Reply | To 44 | View Replies]

To: george76
Quite a bit more has come out over the weekend. Some details:

1. The combination in question isn't the changeable user combination. It's a backdoor, and it's in every Liberty digital lock.

2. You can change the combination all you want, but the backdoor doesn't change.

3. Liberty has a database of these backdoors that is indexed by serial number, which is on the outside of the safe.

4. The FBI had a warrant for the property. A separate warrant is required to get into locked containers. What would be required to force a third party such as Liberty to intervene is a subpoena. Which they did not have.

5. Liberty's legal counsel could have told them the latter had they asked.

6. In response to this incident they have enabled (or are enabling) the customer to have them delete the customer's backdoor from their database. The customer is then on his or her own if he or she forgets or loses the combination.

7. How many safes share the backdoor they gave the FBI is not known.

8. One procedure to prevent this abuse is to remove the serial number from the exterior of the safe, storing it in a separate location. Obviously this will not prevent the FBI from trying the one they do have.

9. The owner is free to tell the FBI to pound sand. If they do have a warrant for the container they can then get in however they wish, but are liable for whatever damage they cause to the container should any occur. Good luck collecting, but it's the law.

You can, of course, have the digital lock swapped out for a mechanical one by a locksmith. At your expense, at least at the moment. Yes, this is a public relations disaster for Liberty. The NYT has already taken the line, "Hey, this is all normal and only a paranoid rightwing extremist could object." Which is pretty telling.

Apologies in advance if any of this information has been superseded by now.

48 posted on 09/10/2023 5:45:41 PM PDT by Billthedrill
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76
First, it is a stretch to call the locked metal boxes made by Liberty “safes.” They give some protection from unauthorized access to guns inside, especially by children. And some fire protection. They don't provide much protection from determined men with box-store cutting tools.

The worst thing I've read is that the Liberty company gives money to elect democrats. I'm certain the money is intended to buy protection; still, it shows company leadership is weak and worthless.

Gun owners should buy something better if they can afford it; if not, buy a cheaper steel box with a lock to store guns to keep the kids out.

49 posted on 09/10/2023 6:02:06 PM PDT by jeffersondem
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

Someone at The Conservative Treehouse suggested converting replaced refrigerators into gun safes.

Note that they may not meet state or insurance requirements.

They have the advantage of being real low cost.


50 posted on 09/10/2023 6:37:26 PM PDT by Brian Griffin
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

“The bits that you asked about here have chunks of carbide on the end, and carbide will make easy work of even the hardest steel”

https://www.amazon.com/JIUWU-Tungsten-Cemented-Stainless-Aluminum/dp/B07HG51HJ2/ref=sr_1_31?crid=35KDYFYLTW806&keywords=diamond%2Bdrill%2Bbits%2Bfor%2Bmetal&qid=1694395944&sprefix=diamond%2Bdrill%2Bbits%2Bfor%2Caps%2C349&sr=8-31&th=1

“Using these carbide tipped bits and a cheap off-brand cordless drill, I drilled through the 1” of hardened steel in the course of about 15 minutes.”

“It is vitally important to take a slow and steady approach when using these. Use a punch to center the bit, then start with a relatively small bit. Use plenty of lubricant (I used leftover automatic transmission fluid ATF) and take breaks to let the bits cool off. Re oil, then go at it again. Started with 3mm, then went to 5mm, 6mm (this one I tried to rush and snapped the bit), then to 7mm, 8mm, 9mm, then 10mm.”


51 posted on 09/10/2023 6:40:53 PM PDT by Brian Griffin
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76
I'd like to learn more about the buyout from the "parent" company.

Why the buyout? Was this a friendly or hostile takeover?

I need to learn the circumstances before forming an opinion.

52 posted on 09/10/2023 6:48:58 PM PDT by Seaplaner (Never give in. Never give in. Never, never, never...in nothing, great or small...Winston ChurchIill)
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76
STOP BUYING THEIR SAFES. SIMPLE.
53 posted on 09/10/2023 6:55:32 PM PDT by MeneMeneTekelUpharsin (Freedom is the freedom to discipline yourself so others don't have to do it for you.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

There has been a lot of discussion about Liberty Safes on The Conservative Treehouse.

The fact is the FBI will be able to get into any safe. The only question is will the safe have any value more than scrap metal after the FBI has gotten in.


54 posted on 09/10/2023 7:01:29 PM PDT by Brian Griffin
[ Post Reply | Private Reply | To 1 | View Replies]

To: Pontiac
If the battery goes dead, the safe gets struck by lightening, Russia hits us with an EMP or in a moment of panic you forget the combination you are locked out of your safe.

Another example of how the "Technology Trap" is getting tighter by the day, and will eventually close in on us.

55 posted on 09/10/2023 7:04:53 PM PDT by dfwgator (Endut! Hoch Hech!)
[ Post Reply | Private Reply | To 35 | View Replies]

To: george76

If the time comes guns may have to be buried.

The best place would be fairly high ground with good drainage.

There is such a thing as ground penetrating radar.

The gun would have to be packed in grease and probably in large diameter capped PVC.

Remember the federal government will know most purchases and you can’t be sure they don’t know about yours if purchased officially by you.

Be aware that guns of modest quality can be made by non-industrial folks, but ammunition is tougher to make and impractical to account for.


56 posted on 09/10/2023 7:13:13 PM PDT by Brian Griffin
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

“This immediately cut thru 1/4” plate”

https://www.amazon.com/ToolAnt-Sprial-Stainless-Aluminum-Plastic/product-reviews/B09SPXP363/ref=cm_cr_getr_d_paging_btm_next_5?ie=UTF8&reviewerType=all_reviews&pageNumber=5


57 posted on 09/10/2023 7:16:34 PM PDT by Brian Griffin
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

Let’s hope they never sell another safe.


58 posted on 09/10/2023 7:29:46 PM PDT by Dave911
[ Post Reply | Private Reply | To 1 | View Replies]

To: george76

Its far worse than Bud Light.

Go ahead and put a tranny on your beer can

But **** with the safety of folks guns and money, and you are asking for serious destruction of your brand


59 posted on 09/10/2023 7:29:57 PM PDT by PGR88
[ Post Reply | Private Reply | To 1 | View Replies]

To: qaz123

Liberty did have no business doing that. Agree 100%.

Not to be argumentative, my house key analogy is more appropriate than your car key analogy. :-)

And...if a car came with an electronic combination to open the doors, I would only buy it if I could set the combination myself. Oh wait, you can do that......

https://www.ford.com/support/how-tos/keys-and-locks/securicode-keyless-entry-keypad/how-do-i-program-my-keyless-entry-keypad/


60 posted on 09/10/2023 7:43:01 PM PDT by ChildOfThe60s ( If you can remember the 60s.....you weren't really there..)
[ Post Reply | Private Reply | To 42 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-72 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson