Posted on 10/19/2015 10:56:22 AM PDT by anymouse
If you think the image above looks frightening, you’re right. The crazy contraption pictured in the image is the first portable railgun, a futuristic projectile launcher associated most commonly with the military or NASA. The man in the image above isn’t in the military, and he’s not a NASA engineer. Instead, he’s a civilian who used some engineering smarts, some widely available parts and a 3D printer to create a functioning weapon that can fire graphite, aluminum, tungsten and even plasma projectiles at speeds of more than 560 mph.
And then there’s the best part: There are videos of this homemade railgun in action.
Little is known about Imgur user “NSA_Listbot” beyond the fact that he’s just short of being a wizard with AutoCAD and a 3D printer. The man took to Imgur over the weekend to share what may very well be one of the most amazing and terrifying DIY projects that has even been attempted. And he didn’t just attempt it, he built it.
Using a combination of 3D printing and widely available components, the man built a functioning handheld railgun that houses six capacitors and delivers more than 3,000 kilojoules of energy per shot. What does it shoot, you might be wondering? So far he has tested the gun using metal rods made of graphite, aluminum and copper-coated tungsten, like the ones pictured below.
It can also fire carbon projectiles and teflon/plasma rods. That’s right, this guy built a plasma gun.
The portable device works just like a full-size railgun, using electromagnetic technology to fire projectiles. But it’s important to note that this portable railgun isn’t quite as lethal as a military-grade railgun. While 560 mph projectiles can certainly do some damage, a military railgun can accelerate a projectile to speeds exceeding 13,000 mph in just 0.2 seconds.
Here’s a video of the man test firing a graphite rod at an aluminum-backed plywood target:
3D printing used to make first real handheld railgun, which fires plasma projectiles at 560 mph
handheld railgun
If you think the image above looks frightening, you’re right. The crazy contraption pictured in the image is the first portable railgun, a futuristic projectile launcher associated most commonly with the military or NASA. The man in the image above isn’t in the military, and he’s not a NASA engineer. Instead, he’s a civilian who used some engineering smarts, some widely available parts and a 3D printer to create a functioning weapon that can fire graphite, aluminum, tungsten and even plasma projectiles at speeds of more than 560 mph.
And then there’s the best part: There are videos of this homemade railgun in action.
MUST READ: The iPhone I couldn’t live with
Little is known about Imgur user “NSA_Listbot” beyond the fact that he’s just short of being a wizard with AutoCAD and a 3D printer. The man took to Imgur over the weekend to share what may very well be one of the most amazing and terrifying DIY projects that has even been attempted. And he didn’t just attempt it, he built it.
Using a combination of 3D printing and widely available components, the man built a functioning handheld railgun that houses six capacitors and delivers more than 3,000 kilojoules of energy per shot. What does it shoot, you might be wondering? So far he has tested the gun using metal rods made of graphite, aluminum and copper-coated tungsten, like the ones pictured below.
qRZZKHX
It can also fire carbon projectiles and teflon/plasma rods. That’s right, this guy built a plasma gun.
The portable device works just like a full-size railgun, using electromagnetic technology to fire projectiles. But it’s important to note that this portable railgun isn’t quite as lethal as a military-grade railgun. While 560 mph projectiles can certainly do some damage, a military railgun can accelerate a projectile to speeds exceeding 13,000 mph in just 0.2 seconds.
Here’s a video of the man test firing a graphite rod at an aluminum-backed plywood target:
And here’s a second video of an aluminum rod being test fired:
The latter reached its target and the impact can be seen, while the former “probably just vaporized” before reaching the plywood.
A few more images of the incredible project follow below, and the full gallery is linked down in our source section.
I think the definition of “railgun” is being used quite loosely here. My understanding of true railguns is that the power requirements are massive (like their own nuke generator type massive), and the degradation of the rail is substantial with each firing. I certainly would not want to hold a device in my hand that generated a plasma pulse ... especially one that came from a 3D printer. What is to keep the charged plasma from arcing to ground thru the body? Furthermore, a device that does not even cause the projectile to go sonic is going to have a very short range because gravity will overtake inertia in less than a mile). As others have pointed out ... no indication of mass of the projectile and at best it looks like a hobbiest created a winner in the best potato gun competition, but I don’t think this is really what it is claimed to be.
Aluminum is a conductor, and the rail gun sets up an electric field in the aluminum, which in turn makes a (transient) magnetic field in the aluminum.
Put wheels on it. Make a great motorcycle.
Does that come in concealed carry?
Okay. I’m just a layman in EE world. I mean I can wire switches and such, and I know aluminum is a conductor, one that does not mix well with copper because of thermal variances when connected together with copper, but I wasn’t aware that an electromagnetic rail gun could throw an aluminum projectile. I always was under the impression that you needed some ferrous material for the magnet to grab hold of.
Excellent idea. The alternator can recharge the capacitors, too.
In a railgun, the rails and the projectile become electromagnets. You're likely thinking of a coilgun.
“Terrifying” ...”Frightening” ...”Crazy”
The writer needs to get a grip.
I want one.
3 day waiting period, 3 week printing time.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.