Posted on 02/04/2013 8:37:37 PM PST by 2ndDivisionVet
Is the text of this letter - or a link to the scan on a website - available to be included in a letter to our legislators... and more importantly to the committee members where national legislation is now?
If his comments gain any traction in the media, how long before the give him the Joe the Plumber treatment?
the give him = they give him
(Wish there was an “edit” button.)
No C.A. It will be by 7.62X39 to prove him wrong.
Heh, I sometimes will sit and watch one of those shows when my wife has them on. I often wonder how many of those people have any clue as to what kind of trouble lurks for them in those “beautiful” hell-holes!
I'll go out on a limb here and say that it's no surprise at all that he has yet to encounter a crime where a "7.63 x39" was used. I'll go out even further on the limb and predict that he never will either. LOL!
Thank you for the list. Bookmarked for later dissemination to liberal relatives...;-)
I am curious what the timeframe is—It seems that in Chicago alone there are more murders per day than 4.2
I bought a load of Wolf for my Glock . I later learned that this ammo has a thin wax coating on the casing that, during heat build up in rapid fire, can melt and gum up the weapon. I never had it happen, but then again I didn’t push my luck.
I ran Wolf .223 through a Bushmaster several years ago, with the resultant horrendous jam from the steel casing after five or six rounds.
It happened repeatedly. So much so, that I stopped using it. Fortunately, I only bought a few boxes of it. These weapons are designed for brass cased ammo. Just my opinion, but I recommend using what it was designed to use.
ComBloc guns are designed for steel cased ammo. Never had a single failure to feed or extract with Wolf, Tula, Golden Tiger, etc., in my ComBloc stuff.
Ran “Brown Bear” 9mm bimetal cased ammo through my Glock 19; gun heated up after a few rounds, and a case locked up in the chamber.
I Can only surmise that the coating the Russkies use on their ammo gummed up and caused the problems, in both situations. I’m pretty anal about my cleaning my firearms, so it wasn’t anything related to dirt/grime, going in.
Again, just my experience with it. Other folks may have had ZERO problems with it.
Steel-cased ammo plays HELL with extractors.
My worst nightmare is a FTE, rather than a FTF.
I can fix FTF by going single-shot, if need be.
But, if I can’t get a case out of the rifle ...
I had a failure to extract coupled with the round behind it jamming at an angle in the chamber.
I invented new swear words that day along with more ancient curses, not uttered nor heard by human ears since the days of the Aztecs...
Effing nightmare, indeed... Never used steel case again, except where it was meant to be used...in Ivan’s guns.
The AK round has a nice, steep taper to it, which aids in extraction. Not so much for the AR rounds. I think this is why steel works so well in the Rooskie cartridges, even with the lacquer.
“...I think this is why steel works so well in the Rooskie cartridges, ...”
That, and they’re designed from the getski-goeski (nyuk, nyuk, nyuk) to use steel. The extractors are brutally tough.
Thanks for your comments of your experiences. My followup with my RRA LAR15:
First off, some time back I tried TulAmmo, futile, every 3rd round didn’t feed.
I ran 40 rounds of the Wolf WPA .223 through it today. Worked perfectly. Groups were nice.
I did note that the finished appearance of the steel cases was much better than the TulAmmo. I also did a thorough cleaning when I got back from the range. I went ahead and grabbed 200 more rounds to try in the next few weeks, weather permitting. I usually run 40-60 rounds through the AR per session. I’ll try to follow up after another session or two.
Wolf is pretty dirty but works fine. I use their “Military Classic” for plinking.
Just clean your rifle thoroughly at least every 500 rounds and you should be fine.
I usually clean after every session unless I plan on shooting within a couple of days or less. Got to maintain good habits.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.