Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

FReeper Canteen ~ Part VI of The Mongols ~ December 14, 2004
www.coldsiberia.org ^ | December 14, 2004 | LaDivaLoca

Posted on 12/13/2004 7:53:07 PM PST by LaDivaLoca

 
 

For the freedom you enjoyed yesterday...
Thank the Veterans who served in
The United States Armed Forces.

 
 

Looking forward to tomorrow's freedom?
Support The United States Armed Forces Today!

 
 




ANCIENT WARFARE





Part VI of The Mongols

cont'd Mongolian Bow: Fish Glue and Sinew

As we understand, a composite bow by definition has several layers. We have mentioned the birch frame, and the layer of horn/bone. In addition to this, there is a layer of specially prepared birch bark whose purpose is to protect against penetration of moisture. In addition to this is a layer of sinew, which is taken from deer, moose or other game animals. The tendons of domestic animals may also be used, but Mongols feel that tendons from wild animals like deer, moose and mountain sheep are the strongest and best. Naturally, the bow has to be glued together. The preferred and traditional substance used for the impregnation of both leather as well as their bows is fish glue. As a matter of fact, fish glue has been proven through millennia to be highly capable of resisting moisture. Moreover, it is durable and lasts longer than modern epoxy resins, which are prone to molecular fatigue. Above all, fish glue is available in all the waters of Siberia where fish is living, among them the greatest of them all, Lake Bajkal.

How is fish glue made? The process that yields the highest quality is to take swim bladders from freshwater fish, soak them into hot water to extract the protein substance, and then boil the resultant soup for a prolonged period. If sufficient quantities of swim bladders cannot be obtained, it is also possible to make hide glue by boiling animal skins. This latter method however results in a glue of inferior quality, because it absorbs moisture, whereas glue made from ichthyic air bladders is highly moisture-resistant.

Although all materials needed to build the Mongolian bow are to be found in the immediate natural environment, the whole production process is very complex. It takes a long time to build a bow that is to meet the Old Mongol requirements. We may also assume that the selection of the best wood material for the frame requires knowledge and experience.

The usual procedure in the production of a traditional Mongolian bow is as follows: The wooden frame is cured, and the horns and/or bone to be used are boiled for softness. This makes it possible to fit the different parts together with great precision. As we understand, high-quality Mongolian bowmaking is certainly a most impressive craftsmanship. When the wooden frame, and the horns/bone parts are ready, the sinewing can take place. First the tendons have to be dried. After that, they are crushed until they form a mass of loose fibers. Next, this mass is mixed with fish glue to form a solid but not rigid layer. It is important to apply the correct thickness and amount of sinew, and it is done in a two-stage process with some days in between. Too little makes the bow weaker, too much would make it stiff. When completed the layer of sinew could be as thick as a human finger before drying. Sinew has a peculiar quality: Unlike other materials, its strength increases when subject to stretching or impact. This form of elasticity is a property stemming from the molecular structure of the protein of tendons (collagen), and can be seen as another striking demonstration of the innate superiority of natural solutions and materials. When used in a Mongolian composite bow, the effect is that as the horn plates in the front snap back to their former shape, the sinew layer in front contracts in the same split-second, adding further acceleration to the shot.

At each stage, fish glue has been applied to secure all the parts. In the horns and wooden parts, the sides that are to be glued against each other are first grafted with a toothed special tool in order to give the strongest possible hold.

The last step is usually the applying of the protective birch bark layers, which are also boiled until soft, so ensuring a proper fit before glued to the finished bow. When the layer of birch bark has been added to the composite construction, the whole bow is wrapped tightly in ropes and placed in a form where it is allowed to dry and harden in room temperature for one year or more. This ensures that the bow becomes extremely strong and that it keeps its shape and snappiness even after many years of frequent shooting.

A Mongolian bow is stored in its own leather case, protecting the bow when not in use.

The String

No bow, no matter how powerful, can be shot without a string. Traditional Mongol bowstrings are made from animal hide. First every trace of fat is removed. Thereafter the hide is stretched and twisted. After this treatment it will not stretch, but remain taut. Although the skin of many fur-bearing animals can be used, horse skin is often preferred since it is said that this material maintains suppleness in the exceedingly low winter temperatures of Siberia and Inner Asia. It is also possible to use the intestines of animals as string material, but such strings are not water resistant and thus only suited for use in dry and hot weather.

Silk and cotton, and mixes of these, can also be used. Modern archers generally use dacron and other man-made materials that require high technology to produce and therefore cannot possibly be made by the archer himself. Here we see another example that the use of primitive materials, although demanding in terms of individual skills and work, is the more reliable and sustainable strategy when viewed in a wider perspective.

When the bow is strung, the archer may sit down, using both feet to press against the bow as the limbs were bent while the string was attached. Using another technique, he or she could also stand upright, bow bent under one leg while the other leg holds the outer end. On horseback, the Mongol archer routinely stringed the bow by placing one end of the bow between the foot and the stirrup while the arms pressed against the bow.

Source: http://www.coldsiberia.org/monbow.htm

Next Tuesday Part VII of The Mongols




TOPICS: Front Page News; Miscellaneous; News/Current Events; Political Humor/Cartoons
KEYWORDS: ancientwarfare; mongols
Navigation: use the links below to view more comments.
first previous 1-20 ... 221-240241-260261-280 ... 801-809 next last
To: Severa

HEy there!! We did a "Field Trip" yesterday from the Canteen yo NAS Brunswick! :o)


241 posted on 12/14/2004 8:52:28 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 223 | View Replies]

To: StarCMC

LOL. I just bet it is scary! Four kiddies and a hubby! Nuf said!


242 posted on 12/14/2004 8:55:38 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 239 | View Replies]

To: beachn4fun

At least hubby does his own. And I'm teaching Squuezit to do hers...!!


243 posted on 12/14/2004 8:56:52 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 242 | View Replies]

To: beachn4fun
GOOD MORNIN' BEACHY--GOOD MORNIN' EVERYONE!!

244 posted on 12/14/2004 8:56:56 AM PST by luvie (WE DID NOT WAVER; WE DID NOT TIRE; WE DID NOT FALTER; AND WE DID NOT FAIL!! GWB ROCKS!!!!!!!!)
[ Post Reply | Private Reply | To 132 | View Replies]

To: Kathy in Alaska

Ma #50


245 posted on 12/14/2004 8:58:51 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 50 | View Replies]

To: LUV W

Howdy Luv W!


246 posted on 12/14/2004 8:58:54 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 244 | View Replies]

To: tomkow6

Tomkow #100


247 posted on 12/14/2004 8:59:30 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 100 | View Replies]

To: tomkow6

Tomkow #150


248 posted on 12/14/2004 8:59:56 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 150 | View Replies]

To: beachn4fun

ME ..... #200


249 posted on 12/14/2004 9:00:25 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 200 | View Replies]

To: beachn4fun

ME ..... #200


250 posted on 12/14/2004 9:00:26 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 200 | View Replies]

To: beachn4fun

250??


251 posted on 12/14/2004 9:00:32 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 246 | View Replies]

To: beachn4fun

250??


252 posted on 12/14/2004 9:00:34 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 246 | View Replies]

To: beachn4fun

250??


253 posted on 12/14/2004 9:00:36 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 246 | View Replies]

To: beachn4fun

250??


254 posted on 12/14/2004 9:00:37 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 246 | View Replies]

To: beachn4fun

PBLT!!


255 posted on 12/14/2004 9:01:38 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 250 | View Replies]

To: StarCMC
how well i know about MT LAUNDRY!

lol.

free dixie,sw

256 posted on 12/14/2004 9:01:59 AM PST by stand watie ( being a damnyankee is no better than being a racist. it is a LEARNED prejudice against dixie.)
[ Post Reply | Private Reply | To 239 | View Replies]

To: tomkow6

ME.......#250


257 posted on 12/14/2004 9:02:15 AM PST by beachn4fun (No tagline was hurt in making of this post!)
[ Post Reply | Private Reply | To 250 | View Replies]

To: Cool Guy; Jim Robinson

This is a great idea!

Local papers still publish names of recently graduated boot campers.

So I think as long as it's limited to what the papers carry we can post them here.


258 posted on 12/14/2004 9:02:43 AM PST by 68-69TonkinGulfYachtClub (God Bless America)
[ Post Reply | Private Reply | To 46 | View Replies]

To: beachn4fun
WOO HOO, to you too. 200.

free dixie,sw

259 posted on 12/14/2004 9:02:57 AM PST by stand watie ( being a damnyankee is no better than being a racist. it is a LEARNED prejudice against dixie.)
[ Post Reply | Private Reply | To 250 | View Replies]

To: All

Ok - gotta go get shorty from preschool - see ya'll later!!


260 posted on 12/14/2004 9:03:11 AM PST by StarCMC (It's God's job to forgive Bin Laden; it's our job to arrange the meeting.)
[ Post Reply | Private Reply | To 257 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-20 ... 221-240241-260261-280 ... 801-809 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson