Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Army scientists, engineers develop liquid body armor
Army News Service ^ | April 21, 2004 | Tonya Johnson

Posted on 04/22/2004 2:47:46 PM PDT by O.C. - Old Cracker

ABERDEEN PROVING GROUND, Md. (Army News Service, April 21, 2004) -- Liquid armor for Kevlar vests is one of the newest technologies being developed at the U.S. Army Research Laboratory to save Soldiers' lives.

This type of body armor is light and flexible, which allows soldiers to be more mobile and won’t hinder an individual from running or aiming his or her weapon.

The key component of liquid armor is a shear thickening fluid. STF is composed of hard particles suspended in a liquid. The liquid, polyethylene glycol, is non-toxic, and can withstand a wide range of temperatures. Hard, nano-particles of silica are the other components of STF. This combination of flowable and hard components results in a material with unusual properties.

“During normal handling, the STF is very deformable and flows like a liquid. However, once a bullet or frag hits the vest, it transitions to a rigid material, which prevents the projectile from penetrating the Soldier’s body,” said Dr. Eric Wetzel, a mechanical engineer from the Weapons and Materials Research Directorate who heads the project team.

To make liquid armor, STF is soaked into all layers of the Kevlar vest. The Kevlar fabric holds the STF in place, and also helps to stop the bullet. The saturated fabric can be soaked, draped, and sewn just like any other fabric.

Wetzel and his team have been working on this technology with Dr. Norman J. Wagner and his students from the University of Delaware for three years.

“The goal of the technology is to create a new material that is low cost and lightweight which offers equivalent or superior ballistic properties as compared to current Kevlar fabric, but has more flexibility and less thickness,” said Wetzel. “This technology has a lot of potential.”

Liquid armor is still undergoing laboratory tests, but Wetzel is enthusiastic about other applications that the technology might be applied to.

“The sky’s the limit,” said Wetzel. “We would first like to put this material in a soldier’s sleeves and pants, areas that aren’t protected by ballistic vests but need to remain flexible. We could also use this material for bomb blankets, to cover suspicious packages or unexploded ordnance. Liquid armor could even be applied to jump boots, so that they would stiffen during impact to support Soldiers' ankles.”

In addition to saving Soldiers' lives, Wetzel said liquid armor in Kevlar vests could help those who work in law enforcement.

“Prison guards and police officers could also benefit from this technology,” said Wetzel. “Liquid armor is much more stab resistant than conventional body armor. This capability is especially important for prison guards, who are most often attacked with handmade sharp weapons.”

For their work on liquid armor, Wetzel and his team were awarded the 2002 Paul A. Siple Award, the Army’s highest award for scientific achievement, at the Army Science Conference.

(Editor’s note: Tonya Johnson is a member of the Army Research Laboratory Public Affairs Office.)


TOPICS: Foreign Affairs; Front Page News; News/Current Events
KEYWORDS: bang; bodyarmor; kevlar; miltech
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-86 next last
To: Shaun_MD
think segments and layers, non-continuous but contiguous (overlapping)
21 posted on 04/22/2004 3:17:25 PM PDT by King Prout (poets and philosophers should NEVER pretend to Engineering... especially SOCIAL Engineering!)
[ Post Reply | Private Reply | To 10 | View Replies]

To: King Prout
Ahhh I see now - like chain mail or mesh.
22 posted on 04/22/2004 3:18:53 PM PDT by Shaun_MD (Inter Arma Enim Silent Leges - In Times of War, The Law will be Silent - Cicero)
[ Post Reply | Private Reply | To 21 | View Replies]

To: Shaun_MD
addendum - the kinetic energy is transmittet laterally throughout the suspension, and is diffused as heat and noise. once energy levels drop below the critical threshhold, the suspension returns to the plastic state.
23 posted on 04/22/2004 3:19:09 PM PDT by King Prout (poets and philosophers should NEVER pretend to Engineering... especially SOCIAL Engineering!)
[ Post Reply | Private Reply | To 10 | View Replies]

To: Shaun_MD
closer to brigandine or scale, but sorta, yeah.
24 posted on 04/22/2004 3:19:56 PM PDT by King Prout (poets and philosophers should NEVER pretend to Engineering... especially SOCIAL Engineering!)
[ Post Reply | Private Reply | To 22 | View Replies]

To: scan59
No, the opposite of ketchup. Ketchup stays semi-gelled and won't pour, until you hit the bottle. This stuff stays liquid unless you hit it.
25 posted on 04/22/2004 3:21:38 PM PDT by coloradan (Hence, etc.)
[ Post Reply | Private Reply | To 7 | View Replies]

To: King Prout
Like I said, I failed physics - lol
26 posted on 04/22/2004 3:22:01 PM PDT by Shaun_MD ("...I have no clue as to what you said, But I agree 100%...")
[ Post Reply | Private Reply | To 24 | View Replies]

To: Mudcat
I'd like to shoot someone like Saddam, with that under a High Voltage transmission line and see what would happen.
27 posted on 04/22/2004 3:23:25 PM PDT by crz
[ Post Reply | Private Reply | To 9 | View Replies]

To: Shaun_MD
Does anyone remember a few years back, when a Japanese Scientist invented a suit that made you near invisible?

You mean here?

28 posted on 04/22/2004 3:25:38 PM PDT by The Grammarian (The Seraph of Syntax)
[ Post Reply | Private Reply | To 18 | View Replies]

To: O.C. - Old Cracker
Nothing new.... TERMINATOR II
29 posted on 04/22/2004 3:26:26 PM PDT by traumer
[ Post Reply | Private Reply | To 1 | View Replies]

To: crz
Probably just turn him into a superhuman monster who can walk through walls, and who can irradiate you at will.
Probably make him immortal too.
30 posted on 04/22/2004 3:26:26 PM PDT by Shaun_MD ("...I have no clue as to what you said, But I agree 100%...")
[ Post Reply | Private Reply | To 27 | View Replies]

To: Shaun_MD
Nope. A shear-thickening fluid responds to the forces it encounters at the moment. At the moment a bullet or fragment hits it at high speed, the fluid cannot move out of its own way and acts like a solid. Once the energy has been absorbed, the fluid relaxes and flows like normal.
31 posted on 04/22/2004 3:35:14 PM PDT by Flying Circus
[ Post Reply | Private Reply | To 10 | View Replies]

To: Shaun_MD
if passing physics was what it took to put to practical use an oddity of materials-physics that many kids have played with in their youth... ;)
32 posted on 04/22/2004 3:38:31 PM PDT by King Prout (poets and philosophers should NEVER pretend to Engineering... especially SOCIAL Engineering!)
[ Post Reply | Private Reply | To 26 | View Replies]

To: Flying Circus
So the harder the impact, the more resistant the armor becomes...
33 posted on 04/22/2004 3:40:33 PM PDT by Shaun_MD ("...Inter Arma Enim Silent Leges - In Times of War, The Law Will Fall Silent..." - Cicero)
[ Post Reply | Private Reply | To 31 | View Replies]

To: O.C. - Old Cracker
Liquid armor is much more stab resistant than conventional body armor.

An excellent 'point.' Conventional armor (minus ceramic inserts, of course ;>) apparently sucks when it comes to attacks using ice picks, sharpened screwdrivers, etc...

;>)

34 posted on 04/22/2004 3:42:05 PM PDT by Who is John Galt? ("Never bring a taco to a gunfight..." Sans-Culotte, 02/26/2004)
[ Post Reply | Private Reply | To 1 | View Replies]

To: cavtrooper21
eighteen year old single malt is body armor in any weather anywhere.
35 posted on 04/22/2004 3:45:51 PM PDT by chuckwalla (O, THE INSANITY, THE LUNACY THESE DAYS)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Shaun_MD
Essentially. The harder you work to deform it, the more it resists the deformation.
36 posted on 04/22/2004 3:47:41 PM PDT by Flying Circus
[ Post Reply | Private Reply | To 33 | View Replies]

To: 4mycountry
come here - neat practical physics with military applications, the basics of which you can play around with in the kitchen
37 posted on 04/22/2004 3:48:46 PM PDT by King Prout (poets and philosophers should NEVER pretend to Engineering... especially SOCIAL Engineering!)
[ Post Reply | Private Reply | To 32 | View Replies]

To: O.C. - Old Cracker; MJY1288; xzins; Calpernia; TEXOKIE; Alamo-Girl; windchime; Grampa Dave; ...
The goal of the technology is to create a new material that is low cost and lightweight which offers equivalent or superior ballistic properties as compared to current Kevlar fabric, but has more flexibility and less thickness.."

“We would first like to put this material in a soldier’s sleeves and pants, areas that aren’t protected by ballistic vests but need to remain flexible. We could also use this material for bomb blankets, to cover suspicious packages or unexploded ordnance. Liquid armor could even be applied to jump boots, so that they would stiffen during impact to support Soldiers' ankles.”

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Ping for our troops, and for those who care about the welfare of our troops!


38 posted on 04/22/2004 3:50:29 PM PDT by Ragtime Cowgirl ("Evil is out there, and evil wishes to attack us." - Lt. Gen. J Vines, commander, 18th Airborne Corp)
[ Post Reply | Private Reply | To 1 | View Replies]

To: O.C. - Old Cracker
polyethylene glycol, is non-toxic, and can withstand a wide range of temperatures.

And if your Humvee overheats, you can squeeze some into the radiator.

39 posted on 04/22/2004 3:53:09 PM PDT by budwiesest
[ Post Reply | Private Reply | To 1 | View Replies]

To: King Prout
This is what I love about Free Republic. You learn something new everyday. Where else could I learn about cornstarch, chainmail and high tech weaponry on a single page? (Even if I did fail physics......)
40 posted on 04/22/2004 3:53:10 PM PDT by Shaun_MD ("...Inter Arma Enim Silent Leges - In Times of War, The Law Will Be Silent..." - Cicero)
[ Post Reply | Private Reply | To 37 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-86 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson