Ceiling medallions are often glued to the ceiling to ensure they stay in place securely. This is especially true for medallions made of lighter materials like foam or polyurethane. Gluing them helps prevent sagging over time, particularly in areas with high humidity or heat. Some sources suggest using construction adhesive like Fast Set Polyurethane Construction Adhesive from Titebond.
However, not everyone glues medallions to the ceiling. Some people secure them with screws or nails into the ceiling joists for added stability.
The decision to glue or not can depend on the material of the medallion and the specific conditions of the room.
Cut through the bead of caulk or adhesive applied around the outside edge of the medallion with a utility knife.
Slide a flexible steel putty knife between the ceiling and the medallion, working around the edges to loosen it from the ceiling.
If the medallion is large, you might need to use a cake icing spatula to get between the ceiling and the medallion.
If it does not come off easily, you may need to cut through the medallion with a drywall saw, especially if you do not intend to remove it in one piece.
After removing the medallion, apply aerosol spray ceiling texture in the area where the medallion was, choose a texture that matches your current ceiling, and paint it to blend in.
AI wrong, the correct answer is #8. A HUMAN answer...
“A heat gun and putty knife will work, but you still may be doing some repairing with compound and tape.”