Posted on 08/18/2023 9:21:47 AM PDT by SJackson
Ever wonder how to build a campfire the right way? I’ve got good news for you. Making a campfire is easy, conditions and experience willing. But you can always craft a better one than your last. Here’s some intel that’ll take your next burn a little further, even if the weather’s bad.
Any fire, no matter how you make it, needs three basic things: Fuel, oxygen, and heat. Altering the ratios of those ingredients will change the way in which a fire lights, burns, and lasts.
Take moisture content in wood, for example. Wet wood produces less heat because energy is required to bring the water contained in it to a boil. And a cooler fire produces more smoke. Water extinguishes a fire because it displaces oxygen, so wet wood will also be harder to light.
Likewise, smaller pieces of wood catch fire more easily because they heat up faster, and a higher proportion of their overall mass is on their surface, where the fuel can react with oxygen and combust. Larger pieces last longer because they heat up slower, and more of their mass is below the surface, where there’s little to no oxygen.
And, that oxygen needs to get to and around a piece of wood if it’s going to combust. So, allowing room for airflow will help a fire start and grow. Reducing airflow can help extend the time it takes for wood of a given size to burn up.
If you’ve ever tried to start a fire by just holding a lighter to a log, you’ve realized that fuel sources need to start small. And if you’ve watched a pile of twigs burn to ash in a few seconds, you understand that larger, denser fuel burns longer.
Before attempting to start your fire, collect or prepare adequate amounts of tinder, kindling, and larger pieces of wood.
Tinder counts as small, fine, dry material like grasses, wood shavings, or fluffy stuff that is capable of igniting when exposed to the smallest amount of heat, like a spark or lighter flame. This quickly catches fire, but just a quickly burns up. So, you use the initial flames it produces to ignite kindling, which are small, dry pieces of wood, usually about the diameter of a pencil.
Go back to that description of why more surface area helps wood burn easier. Breaking up small twigs, or fracturing them apart with a knife can create splinters and cracks that increase surface area on kindling, helping it ignite more easily.
Kindling produces more heat then tinder, and burns longer, which you then use to ignite logs. You’ll need a few different sizes of wood to grow your fire. I like to start with some that’s about as thick as my thumb, then sticks and split logs about as thick as my wrist, and once a fire is really going, I add stuff as big around as my leg.
Gathering all this into separate piles before lighting your fire means you’ll be able to concentrate on feeding it at just the perfect moment, rather than rushing around trying to find more fuel sources as your fledgling campfire burns out.
Want to make a big fire that will light easily? The tepee method is almost infinitely scalable. Just prop logs up to form a loose cone, starting with kindling, then adding larger fuel as you work upward and outward. Once lit, the fire will naturally propagate through the different sizes of wood, even when your tepee inevitably collapses. Just remember to leave a door so you can insert tinder into the middle, and light it. You also want plenty of gaps so that air can flow through, but make sure your kindling is close enough to your tinder that it catches.
Want a fire that will last a good amount of time, with little to no maintenance? Stacking logs in a square structure reminiscent of a log cabin will progressively burn those logs over a reasonably long period of time, and naturally facilitates airflow into the middle of the structure. Start your cabin fire by building a tepee of tinder and kindling right in the middle.
Want a fire that will burn all night, untended? Building a dense stack of logs, then lighting a tepee on top of it will combust the uppermost fuel, then move downwards as each layer of logs burns up. This platform or upside down fire can be challenging to master, and requires very dry logs, but get that topmost tepee big and hot enough, and you’ll have a source of heat that should burn until it’s completely out of fuel—long enough to cook a gourmet campfire meal. (Photo: Wes Siler)
Want to achieve a long lasting fire a little easier, at the cost of regular maintenance? A classic star fire, as seen in every western movie ever made, arranges logs around a central tepee, with one end in the flames. Scooting those logs inwards as they burn allows you to control how fast, and for how long the fire burns. If you have a dished fire pit or ring, the inward motion of the logs may even be facilitated by gravity.
(Photo: Wes Siler)Once you’ve experimented enough with the techniques above and learned the nuances of campfires, you may come to the same conclusion I did: the easiest, most reliable fire style is a simple lean-to. Just prop up wood over tinder and kindling using a log, rock, or anything else you have handy. Leave some room for air, add more wood as necessary, and don’t overthink things. The principles that make the other types of fire successful—airflow and progressive fuel loading—apply here too, just in a more freeform fashion.
Consult the relevant local, state or federal management agency for where you plan to have a fire, and only build one when it’s permitted. Also consult those regulations for any required means of extinguishment. Depending on where you are, you may be required to have a shovel, water container, or bucket of sand available adjacent to that fire.
Piling soil or sand onto a fire cuts off its source of oxygen, putting it out. But, heat can be trapped below the surface, and embers can be blown into nearby fuel sources if left unattended.
Dousing a fire with water also cuts off its oxygen, and ample amounts of water can also eliminate its heat.
No matter which you use, take the time to stir the soil, sand, or water through the fire until it’s cool to the touch, and no telltale strands of smoke remain.
If a fire is crucial to your enjoyment or survival, then it’s a good idea to take more than once source of ignition. Lighters are obviously convenient, but they can run out of fuel, break, and may not work in cold or wet conditions.
Ferrocerium rods are made from a metal alloy that produces sparks when scraped. They keep working even after you drop them, last through years of use, and work even when wet or cold. But ferro rods also require perfectly prepared tinder if you’re going to be able to take advantage of those sparks. If you carry a ferro rod, you should also carry a source of tinder. My favorite are Vaseline-coated cotton balls. The petroleum jelly protects the fluffy inside from moisture, and helps extend its burn time. You can make these things at home simply by combining a handful of cotton balls with a handful of Vaseline inside a plastic bag, and kneading to combine.
Should generate some different opinions.
avoid swinging a sharp object around vulnerable body parts. I still prefer an axe.
Parafin or resin-coated excelsior is a great fire starter.
Thanks...
I could taste the ‘Smores!’
Yep. Split large pieces of wood with a knife, sooner or later you will break the blade. Even if it's a $350 "bushcraft" knife. If the knife is all you have, that's one thing, but otherwise it's better to learn how to use an axe, even a small hand axe.
Must be inflation, I swear I boutght my axe for about 20 bucks.
https://www.amazon.com/Estwing-Sportsmans-Axe-Camping-Construction/dp/B0002JT0AK/ref=sr_1_2?crid=1963AVW8HJ5EV&keywords=estwing+axe&qid=1692376755&sprefix=eswing+axe%2Caps%2C91&sr=8-2
I use diesel.
I guess I just need to pre-heat my wood burning stove this winter.
That would kind of defeat the purpose of the fire, though.
I always thought the third requirement was ignition.
I once saw a guy pour gasoline on an open camp fire.
He was lucky. He got away with it.
Where’s the kindling?
NOBODY is going to start a stack of logs those size without a blowtorch.
Dryer lint makes a decent fire starter. I’ve made homemade starters using dryer lint inside a used toilet paper roll, and then wrapped newspaper with a twist at the ends. Put that under your kindling, and build your logs around the kindling. I often use the cabin style method, but the tepee works great, too. I really like the lean-to method, too, because that’s what the logs tend to form on their own as they fall into each other, so why not start that way?
Diesel is well behaved. If you want speed, watch this:
https://www.youtube.com/watch?v=sab2Ltm1WcM
Yep, good to start a fire and to warm a long stove chimney
It is inflation. These days a handle can cost $20, and it’ll be a crappy handle at that. I usually have to sight the whole bin of handles at the hardware store to find one that’s almost straight.
All of my axes, mauls, pulaskis, etc. are over 40 years old by now (at least the heads are; I do break a handle from time to time, generally through carelessness). New tool prices are obscene.
Who needs eyebrows anyway
I used to live at sea level in Florida. The tepee technique was needed to give enough air to get and keep the fire going.
Now I live at a much higher altitude and use the stacked log cabin method.
That’s pretty cool. I’ve never seen that kind before.
I was on a retreat with the young adults of our church a couple years ago. I’m 70, but I walked up to where they were going to be starting a fire for everyone to gather round.
The young adults were trying to start their fire. Apparently, they had been working on it for over an hour. They sent someone to get a tank of gasoline.
I calmly went over, took some tinder and kindling and had a nice teepee fire going in about 2 minutes. I added wood to it and had a roaring blaze going before they returned with their gasoline.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.