"You can have you nacelles in any color..."
Posted on 07/11/2006 10:54:08 AM PDT by Yo-Yo
Picture: Boeing plans plain grey natural laminar flow nacelles for 787s in bid to reduce fuel burn
By Guy Norris in London
Boeing plans to reduce airframe drag on the 787 by standardising on a specific thickness of grey paint (pictured below) for the engine inlet which it says will preserve natural laminar flow over a larger area.
The benefits of laminar flow over the nacelle include increased range, improved fuel economy, and even reduced aircraft weight. These benefits add up to improved operating economics as well as reduced emissions. By using a seamless paint layer applied according to tight Boeing design tolerances, as opposed to the more traditional airline practise of applying several layers of different paint, the company says thousands of litres of fuel will be saved every year.
“If you interrupt the laminar flow over the inlet by adding paint layers, which are common with airline liveries, you could increase fuel burn by 30,000USGal [115,000 litres] per year per aircraft,” says 787 propulsion leader Ron Hinderberger.
Laminar flow occurs when the thin boundary layer of air closest to the wing or inlet surface remains smooth without irregularities or cross flows. A turbulent boundary layer exists when the flowing air is irregular, and when there are cross flow conditions. The frictional force between the wing (or in this case the inlet) and the air is called viscous drag, and overcoming this drag burns more fuel. When the boundary layer is smooth the laminar drag is reduced and less energy is needed to move the aircraft through the air.
Laminar conditions are generally hard to achieve and maintain, and Boeing has put considerable effort into this design aspect to offset the drag of the 787’s extra large bypass engines at a time of rising fuel costs. Although active laminar flow control techniques (involving suction of boundary layer air through tiny holes and slots) have been investigated by Boeing in the past, the passive laminar flow technique adopted for the 787 is based largely on well-known design processes.
Although aircraft as far back as the North American P-51 Mustang fighter of World War II fame had a passive laminar flow wing, the laminar conditions existed for only a very short distance past the leading edge. The Boeing paint initiative hopes to not only increase the natural laminar flow area aft of the inlet leading edge, but allow it to be maintained in service for long periods without significant degradation over time
"You can have you nacelles in any color..."
That whole grey area is a nacelle? I always thought that was a cowling and the nacelle is the portion where the engine is melded to the wing or fin section creating a hump that flows through to the exhaust. Ya learned me somethin' new. Thanks
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.