Linksys wireless router effective speed greater than 10MB VANITY

[RightField]

ibz?

[Ramius]

If 1.5Mbps upstream isn't fast enough for you... you've got way bigger problems than wifi.

[xrp]

Your connection upstream from your router is only going to be whatever your ISP allocates for you. DSL or Cable modem, most upload maximums are 128kb/ps-384kb/ps. So you could connect to your wireless 802.11g @ 54Mb/ps and still only have 1.5Mb/ps down - 384kb/ps up from your DSL provider.

[Larry Lucido]

I have FIOS fiber

I use this.

[xrp]

Nevermind, I just re-read and saw that you have fiber to the house. Must be nice!

Check your settings on the router, maybe you set it for 11Mb instead of 54Mb.

[Ramius]

FYI... the only reason that upstream and downstream are different in the first place is going to be because of throttles on the ISP's end.

They don't want to offer home users that much upstream bandwidth because then you and lots of people like you would get into the hosting bidness and clog their network.

[GrandEagle]

I'm running mediacom through a linksys wireless G router and using http://speed-test.net/ I'm getting these results:
Test Type: Download 25 Kilobytes
Your IP address:
Data used today: 25600 bytes
Maximum usage: 512000 bytes
Data remaining: 486400 bytes
Bytes Transferred: 25600 bytes
Download time: 0.578 seconds
Throughput: 354.3 Kilobits per second (kbps)
= 44.2 Kilobytes per second (kBps)

[Viking2002]

You need more than 1.5 MB/Sec? You hacking into DARPA there, sport? I'd give my left cojone for that.....LOL

[GrandEagle]

My network connection is 54.0 Mbps

[DB]

The bandwidth of 802.11G is dependent on the distance between points. The closer they are the higher the bandwidth that is available (assuming it is configured properly). Also, MB is mega bytes and Mb is mega bits. 1.5 MB per second would be 12 Mb per second.

[GrandEagle]

Test Type: Upload 25 Kilobytes
Your IP address:
Data used today: 51200 bytes
Maximum usage: 512000 bytes
Data remaining: 460800 bytes
Bytes Transferred: 25600 bytes
Upload time: 0.578 seconds
Throughput: 354.3 Kilobits per second (kbps)
= 44.2 Kilobytes per second (kBps)

The Upload test..

[darkwing104]

Does it work they way you want it to?

[BigSkyFreeper]

There are 8 bits in 1 byte, so for example if your transfer speeds are 12 megabits per second, you're really getting 1.5 megabytes per second (e.g. 12^6 or 12000000 divided by 8).

[A CA Guy]

My 1200 baud modem just screams.

[BigSkyFreeper]

You should probably use a larger file, say a 1 megabyte file, as opposed to a 25 kilobyte file, because transfers "spike" at the start of transfer and settle back down. Then you'll get a more accurate gauge of your upload/download speed.

[isthisnickcool]

If you push the phone receiver deeper into the two black cups will it make it go faster?

[GrandEagle]

I tried it with the 200Mbps file (the largest this site has) with the same results. Is there another site that tests this with a larger file?

[GrandEagle]

I read the thread more closely after I had posted. Fiber, at home - you should be able to see the green (with envy) from where you are.
I'll have to test this at the office. We have 2 T1 lines there.

[GrandEagle]

If you push the phone receiver deeper into the two black cups will it make it go faster?
Hey, I remember those, and probable still have one in the boneyard in my garage!