HTML Sandbox 2011

FR | 01 January 2011 | Various FR Members

[ShadowAce]

It's time for a new HTML reference so you can make your posts look cool.

HTML means Hyper Text Markup Language. It's a set of simple commands used to format the text of your posts, add images, or links, or change the appearance.

URL is Uniform Resource Locator. It's the name of the page or the picture that you see, the www.http:// stuff. You'll need to use the URL to make links and post pictures.

Quotation Marks Quotes have to be used around the URLs for web pages and images on Free Republic. Some systems do not require this. Ours does.

Once the Free Republic software detects an HTML tag in your post, it will assume the entire thing was written for HTML. This means it will eliminate paragraphs and line breaks that you used to clarify your writing. In order to prevent that, I'll start with the two simplest tags, <br> and <p>. When you use html tags, they disappear when the post is pasted to the board, so don't worry if they look funny or if your post seems to run on.

This is the break tag. <br>
It tells the computer to end the line and start a new one. <br>
Just type it where you want the line to end. <br>

This is the paragraph tag. <p>

It tells the computer to end the line, insert a blank one, then start a new line.

The rest of the tags have to be used with an on tag and an off tag. This is simple enough. One of the most commonly used tags is the italic tag <i>. This tag turns the italics on. When you want the italics to end, turn them off by using the forward slash with the appropriate command, in this case, </i>.

Commonly used tags:
<p> paragraph
<br> line break
These tags are not used in pairs.

Commonly used pairs:
<i> </i>italics
<b> </b>bold characters
<u> </u>underline
<font color = red>This makes the font red.</font color = red> Orange,blue,green,purple,and yellow also work.
<center> </center>

This will put whatever is between the tags in the center of the page
and center justify the margins.

Headline fonts
Headlines add emphasis to an important point.

<h1> SIZE 1 </h1>

<h5> SIZE 5</h5>

You can use 1,2,3,4, or 5. The tags automatically insert a blank line between the headline and your next paragraph.

Sarcasm tag
</sarc> This is the sarcasm tag. It is not a real HTML tag. It is used to mark your witty repartee so that everyone will know you are making a funny. Type an ampersand - & then lt; then /sarc. An & and gt makes the other carat >.

How to create a link:
<a href="http://www.freerepublic.com/home.htm">www.Free Republic.com</a>
A means anchor. H ref means horizontal reference. It's called horizontal because the computer is going across the web to a different page. There are also vertical links that can go to specific points on the same page. What comes after the a href= is where the computer will go. The horizontal reference is the complete URL of the page you want to link. It's in the navigation bar at the top of your web browser. Highlight it and copy it. Make sure you get all of it. Some URLs are surprisingly long, and if you miss some of the URL, the link might not work.
You can type anything between the <a href=></a> parts.
www.Free Republic.com
Click here.
abc12345
All of these links go to the same page, I just typed different things between <a href=></a> tags.

How to add images to your post:
<img src=></img>
The img tags tell the computer to find and insert a picture.
These tags insert this wonderful image from Rush Limbaugh's website:
<img src="http://www.rushlimbaugh.com/home/daily/site_062807/content/01125113.Par.4584.ImageFile.jpg""height=218""width=285"></img>

You need to know the URL of the picture to do this. You can see the picture's URL when you put your cursor on the picture and right click the mouse. You see a small box with "properties" at the bottom. Left click on "properties" and you get a dialog box with the image URL and dimensions. It says Address: next to the URL, with (URL) underneath. Copy the URL and paste it after your img src= tag. Make sure you get all of the URL for the picture. There isn't a lot of space for the URL and sometimes they are very long. The image Size and Dimensions are beneath the URL. Free Republic allocates memory for each image, and if it doesn't know the dimensions of the image, it will allocate more memory than needed. It tells you the width, then the height of the picture. You don't have to tell the computer that the height of that image was 218 and the width was 285, but it saves memory and memory costs money.

This is called a hotlink. The picture is actually on another computer, but we see it here. This causes the other computer to use it's memory and machinery to provide the image. Some sites prevent it, or object to it. You can't hotlink an image from any of Yahoo's GeoCities pages, for example. Yahoo prevents it.

Do Not Cut And Paste List.
Some websites have forbidden us to copy and paste their material, including images. There have been lawsuits over this. The software will mostly prevent you from using the material that has been blocked, but not always. There are also some image sources that are not allowed on the list. Please don't use them. Lawsuits suck.
Link to the Do Not Cut And Paste List

Help With Creating HTML Tables

Basic Table Tags

The three most important tags for tables is the opening table tag, <table> and the table row and table data tags - <tr> and <td> respectively.

The <tr> tag represents a row for the table

The <td> tag represents a cell (or column) inside the row.

Now, with that in mind, let's create a simple table:

<table>

<tr>  
<td>A</td>
<td>B</td>
<td>C</td>  
</tr>

<tr>  
<td>X</td>
<td>Y</td>
<td>Z</td>  
</tr>

</table>

And this is what the table would look like published:

A	B	C
X	Y	Z

Notice that by looking at the code, you can tell how many rows and columns are included just by looking at the code.  The two opening <tr> tags indicate two rows and the three opening <td> tags on each line represents three data cells (or three columns).

So if you wanted to add another row, you would just start with another <tr> and so forth....

Adding Table Borders

Adding a border simply involves inserting the border attribute to the opening table tag. So in the above table the code would be adjusted accordingly:

<table border="2">

<tr>
<td>A</td> 
<td>B</td> 
<td>C</td>
</tr>

<tr>
<td>X</td> 
<td>Y</td> 
<td>Z</td>
</tr>

</table>

Notice the "2" represents the thickness of the border. If you had set it to "0" then there would have been no border at all. If you wanted it very thick then you could set it to 8, for example.  So now your table will look like this:

A	B	C
X	Y	Z

Changing a Table's Border Color

(Does not seem to work on FR)

You can change the color of a table border by simply adding the bordercolor attribute.

<table border="2" bordercolor="red">

<tr>
<td>A</td> 
<td>B</td> 
<td>C</td>
</tr>

<tr>
<td>X</td> 
<td>Y</td> 
<td>Z</td>
</tr>

</table>

And here's what it would look like...

A	B	C
X	Y	Z

Adjusting Table Cell Spacing and Cell Padding

You can increase the space within the table cells and the space between the cells by using the cellpadding and cellspacing  attributes.

The cellspacing attribute adjusts the space between the cells and cellpadding adjusts the space within (around) the cell.

<table border="2" cellspacing="10" cellpadding="3">

<tr><td>A</td>  <td>B</td>  <td>C</td> </tr>

<tr><td>X</td>  <td>Y</td>  <td>Z</td> </tr>

</table>

This is what the table would look like now...

A	B	C
X	Y	Z

See how setting the cellspacing attribute to "10" drastically increased the spacing between the cells, and the cellpadding attribute set to "3" added a little of space within each individual cell.

If you want a table to have a single border (with no border around the letters), simply set the cellspacing to "0" and your table will look like this....

A		B	C
X	Y	Z

Specifying a Table Width

You can specify the width of a table by using either a percentage or a pixel width.

<table width="100%" border="2">

<tr>
<td>A</td> 
<td>B</td> 
<td>C</td>
</tr>

<tr>
<td>X</td> 
<td>Y</td> 
<td>Z</td>
</tr>

</table>

Since the width is set to 100% that means the table will take up 100% of the screen and the columns in the table will be adjusted evenly.  Here's what it would look like.

 

A	B	C
X	Y	Z

As we mentioned, you can also set the table width using pixels instead of percentages.  So instead of setting it to 100%, you could set it to 300 pixels:

<table width="300" border="2">

<tr><td>A</td>  <td>B</td>  <td>C</td> </tr>

<tr><td>X</td>  <td>Y</td>  <td>Z</td> </tr>

</table>

The table would look like this:

A	B	C
X	Y	Z

Setting Column Widths

Sometimes you may not always want your columns to be the same width.  If this is the case, you need to set values on your table data <td> cells.  Again, you can set them by using percentages or pixel widths.

<table width="300" border="2">

<tr>
<td width="70%">A</td>
<td>B</td>
<td>C</td>
</tr>

<tr>
<td width="70%">X</td>
<td>Y</td>
<td>Z</td>
</tr>

</table>

This is what this table would look like.
 

A	B	C
X	Y	Z

See how the column width for the first column in both rows is set to 70%.  Notice there is no value set for the other 2 columns.  If you do not set a value for the remaining columns, their width will automatically be adjusted to take up the remaining space and they'll share it equally.

Since the table width is set to 300 pixels, and the first column is instructed to take up 70% of those 300 pixels (roughly 210 pixels), the other 2 columns divide the remaining 30% of the table equally (roughly 45 pixels a piece).

You could also have expressed the column widths of this table in pixels instead of percentages.  The code would have looked like this:

<table width="300" border="2">

<tr>
<td width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

<tr>
<td width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

</table>

 

A	B	C
A	B	C

 

See how the width of the columns in each row add up to 300 (210 + 45 + 45) -- which is the width of the table.

What's the Difference Between Using Percentages and Pixel Widths?

Many people prefer to express their table width and column widths in percentages because that will ensure that the table takes up the same amount of screen no matter how big or small the screen resolution is. 

If someone is using a 21 inch monitor to view your site and you have a table width set to 300 pixels, the table will show up very small on their screen.  However if you set the table width to 70%, it will take up 70% of the screen no matter what size monitor the person is using. 

Or, let's say you create a table that is 760 pixels wide and someone has a 15 inch monitor set to a 640x480 resolution, then that person will have to scroll left and right just to see the entire table. 

On the other hand, if you set the table width to 100%, the table will fit the screen no matter what resolution the browser is set to.

So it's really up to you to decide what's the best layout for your tables. Personally I prefer to use percentages.  That way the table takes up the same amount of screen no matter what size monitor/resolution people are using.

Specifying a Table's Height

You can also set the table height by adding the height tag to the table code.

<table height="250" width="300" border="2">

<tr>
<td width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

<tr>
<td width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

</table>

Which will produce the following table:

A	B	C
A	B	C

Horizontally Aligning the Content Inside Tables

The content inside a cell is left aligned by default, but you can also center or right align the text as well by using the align attributes.

<table width="300" border="2">

<tr>
<td width="210" align="center">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

<tr>
<td width="210" align="center">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

</table>

 

A	B	C
A	B	C

See how the first column is aligned to the center?  You can also right align the columns by using the align="right" inside the <td> cells.

Vertically Aligning the Content Inside the Table Cells

So far we've kept the table cell alignment at the default, which is the middle.  Notice in the above table that the A, B, and C are all three aligned in the middle of their cells.  Well you can change their alignment to either top, bottom, or middle by using the valign (which stands for vertical align) tag:

<table height="250" width="300" border="2">

<tr>
<td valign="top" width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

<tr>
<td valign="top" width="210">A</td>
<td width="45">B</td>
<td width="45">C</td>
</tr>

</table>

 

A	B	C
A	B	C

I've set the table height to "250" so the alignment would be more noticeable. Notice that the A in both rows are aligned to the top.  You can also align to the "bottom" or the "middle".

Creating a Left Navigation Layout With Tables

As we mentioned earlier, most left and right navigations are created using tables.  All you do is create a table with one row, two columns and no border.  Then align both of your columns to the top (using the valign tag) so your text will start in the top of the columns, not the middle.  Then depending on if you're going to have a right or left navigation, you'll make one column significantly smaller than the other.

Here's a simple left navigation layout:

<table width="100%" border="0">

<tr>
<td valign="top" width="25%">Left Nav Links Here</td>
<td valign="top" width="75%">Body Here</td>
</tr>

</table>

And here's what it would look like: 

Left Nav Links Here	Body Here

 

Notice I set the border to "0" but it's still showing in the example.  I just did that to show how the layout would look. If you set your border to "0" you won't see any lines around your table.

---

So there ya have it!  That's a general overview of tables.  There's so much more you can do with them, but if you can understand the basic layout, you'll be able to do so much with the design of your web site.

[conservatism_IS_compassion]

I use <blockquote> a lot;

as you know it indents the following text like this.

I also like to use lists:

numbered list:<OL>

<LI>
1. first item<LI>
2. second item<LI>
3. third item

</OL>end of list.

Bullet point lists:<UL>

<LI>
• first item<LI>
• second item<LI>
• third item

</UL>end of list.

definition lists:<DL>

<DT>

term </DT> <DD>

meaning </DD> <DT>

next term </DT> <DD>

meaning </DD>

</DD>

[conservatism_IS_compassion]

. . . and append </DL> to my previous post to close out the definition list . . .

[conservatism_IS_compassion]

If you want to link to a specific reply within a thread, say post #12, you need the URL link to that spot in the thread. You can obtain it simply by clicking on the number of the post within the thread. That takes you to the top of that reply - leaving the URL of that location in your URL window available to be copied.

[optiguy]

[Navy Patriot]

Ping to ShadowAce’s HTML sandbox.

[Fiddlstix]

C'mon over to this thread and get yerself sum HTML learnin'

Ya might wanna bookmark it too.......
Could come in handy.......

[GnuHere]

(Seeing if image works)

[Clyde5445]

I found it

[onyx]

I just replied to you in FR mail

[Clyde5445]

I show what I mean. like this See what I mean

[Lakeshark]

Type p inside brackets <> after the like this

Like this......

:-)

[Clyde5445]

see if this works

I got it now

[Quix]

I need to make a better, more easily accessible, indexed/table of contents listed FR homepage:

http://www.freerepublic.com/~quix/index

My assumption is that I could have a first page listing the table of contents with clickable titled topic pages listed thereon.

I have no idea how to go about that.

Is there a section of some tutorial somewhere that could help me out?

THX IN ADVANCE.

[apocalypto]

ping for later

[Crooked Constituent]

NO CHEESE!

[JoeProBono]

[Crooked Constituent]

HA! Yer one of the best photo guys on here. Just thought I’d try my very first picture post to you in the sandbox. I was successful on the second attempt... see reply #5 http://www.freerepublic.com/focus/f-news/2677090/posts

[Gilbo_3]

or

[Gilbo_3]

or

[Jemian]

I'm not sure why it didn't work. I checked your html and it seems okay. For pictures, though, on FR, you don't need quotation marks. At a guess, perhaps those pictures have limited, rather than "everyone" permissions. Or maybe the problem is that it is https and not just plain old http.

I'm not sure.