Keyword: 3dprinting
-
In yet another move which may send shivers down the spines of law enforcement agencies around the world, while at the same time exciting techies and firearm advocates, Solid Concepts has revealed yet another 3D printed metal gun. Just under a year ago, the company, which has since been acquired by 3D printing giant Stratasys, revealed the world’s very first 3D printed metal handgun, the 1911. Although there had been a number of interesting plastic firearms 3D printed up until that time, this metal firearm was the first capable of shooting several rounds of ammunition flawlessly. In fact the original...
-
Health professionals who treat burn victims are acutely aware of the necessity to treat burn injuries, particularly severe ones, as rapidly as possible. As one journal article explains it, “In severe burn injuries where both the epidermal and dermal layers of skin are destroyed, prompt wound closure is critical for favourable [sic] patient outcomes and reduced mortality rates.” A team of biomedical and mechanical engineering graduate students at the University of Toronto have developed what may at the least be considered a preliminary–but certainly extremely technologically advanced–solution to the problem of critical, temporal health intervention for burn patients. For their...
-
While we have seen so many incredible life-changing applications for 3D printing, there are still many concerns which remain on the table when dealing with the possible negative implications of the technology. Whether you believe that the ease in which practically anyone will eventually be able to fabricate a firearm is a good or bad thing, just the thought of 3D printed firearms will send shivers down the spines of law enforcement agencies around the world. There has been an incredibly fast progression of the technology behind the methods of manufacturing guns with 3D printers in the last two years...
-
There are two 3D printing technologies that are capable of producing products that are almost indistinguishable from those created using traditional manufacturing techniques. These would be Selective Laser Sintering (SLS), and Polymer Jetting technology. The former is widely used by 3D Systems in their industrial level machines, which can cost in the $500,000+ range. The latter is currently used by Stratasys in their patented PolyJet technology, which is utilized in most of their industrial level 3D printers. These printers also cost in the 6-figure-plus range. While these 3D printing technologies are some of the best out there, the price tags...
-
Tungsten is an extremely hard, robust rare metal that has the highest melting point of all the elements, at 3422 °C (6192 °F). It also has a density that is 19.3 times that of water and about 1.7 times that of lead, which makes it comparable to uranium and gold. And now, a Philips-owned company is 3D printing it. Netherlands-based Smit Röntgen, a medical imaging parts manufacturer, has used Direct Metal Laser Sintering to 3D print tungsten parts. The company began researching the potential of 3D printing tungsten as a business opportunity over a decade ago and announced on Monday...
-
3D castle printed by Andrey Rudenko in Shorewood, Minnesota as seen at the end of August 2014. The castle is about 3.5 metres high.People have used 3D printers to print everything from medical devices to guns. But one Minnesota man is hoping to take this new technology to the next level and print a house. Andrey Rudenko, of Shorewood, Min., plans for the house to be about 10 metres by 20 metres. If it is two storeys, it will be about 3,600 square feet. And he is hoping to print the entire house in about a week. It would be...
-
Building site of the first ever 3D printed estate in Gardiner, New York. New York City architect/contractor Adam Kushner begins construction of the first ever 3D printed estate, which features a 3D printed swimming pool, 4-bedroom, 2400 square foot home, and more. The 3D printer which will be a modified version of Enrico DiniÂ’s D-shape printer, will, if all goes as planned, eventually be able to automatically place rebar within the 3D printed house, as it prints. We have covered a lot of news concerning the 3D printing of houses, over the course of the last year or so. Whether...
-
When will 3D Printers be able to build electronic devices from the ground up? ThatÂ’s a question many within the 3D printing space have been pondering for some time. Some experts feel as though it is only a decade away, while others think it could be a lot longer. Without a doubt, when this happens, it will change the world in ways that we could never imagine. Close your eyes and think about all the electronic devices that you use on a daily basis. There are smartphones, TVs, PCs, home lighting, automobile key fobs, and the list goes on. Now...
-
CNC firm’s 3D printing adapter to combine additive and subtractive processes in one machine. CNC machine maker, Hurco, announced that it recently filed a U.S. patent application for a new technology that combines 3D printing and CNC machining. According to the company, it has developed an additive manufacturing adapter that will allow Hurco machines to 3D print directly. “We designed an additive manufacturing adapter that, in combination with proprietary Hurco control software, effectively turns a CNC milling machine into a 3D printer,” said Gregory Volovic, President of Hurco Companies, Inc. “With this new additive manufacturing capability, users may go from...
-
Metal 3D printing is the Holy Grail of additive manufacturing. Unlike with other materials that can be printed, metal enables manufacturers to create end-use objects via 3D printing, objects which oftentimes outperform matter-1those produced with traditional casting techniques. In fact General Electric and Airbus are already saving money money using metal laser sintering machines to produce parts for anything from aircraft, to fuel nozzles. Additionally, once those products are installed for end-use, they continue to save money because of their light weight, great strength, and precise fit. The reductions of just a few kilograms on board an aircraft can save...
-
When 3D printing is discussed, one of the most debated topics is that of 3D printed weaponry, specifically guns. Last year, Solid Concepts created a 3D Printed replica of a 1911 pistol. At the time, it brought up quite a bit of debate, as the 3D printing of guns could severely undermine national and world-wide security. If anyone with a 3D printer could print an operational gun, then what good are laws that prevent people from obtaining guns? TodayÂ’s consumer level 3D printers can, for the most part, only print in plastic or plastic-like materials. Many people argue that guns...
-
A gunmaker who calls himself Buck O’Fama (get it?) has posted an video of his 3D printed Ruger Charger receiver. This single part, which usually holds the serial number and is an integral part of the firing mechanism, is, technically, the only part that defines a weapon as an actual gun. By printing his (or her) own, O’Fama has essentially skirted the law that requires all firearms to be registered with the federal government. Unlike the 3D printed Liberator, this 3D-printed part requires very little structural support and is simply used to guide the mechanism while firing. In other...
-
The number one issue that people have with 3D printers today, is the speed at which they print at. People now-a-days want things quickly, at the touch of a button. Over the years, many of our everyday jobs, chores, and desires have reached a point of almost becoming instant. For example, when you want to print a document from your computer or tablet, its done in approximately 5-10 seconds. When you want to bring up a website on your smartphone, itÂ’s up in a matter of 1-2 seconds. Just about every aspect of our lives, when compared to that of...
-
“Bigger is better,” as the old adage goes. When it comes to a juicy steak, or a diamond ring, these words always hold true. When it comes to 3D printing, however, there still remains some debate. The 2nd World 3D Printing Technology Expo was held in Qingdao, Shandong, China this past week (June 19-22). It featured thousands of individuals from China, United States, Germany, Belgium, the United Kingdom, and almost a dozen other countries. They were there to discuss the latest breakthroughs in 3D Printing, including possible applications, material use, business models and more. Qingdao Unique Products Develop Co., Ltd,...
-
When it comes to 3D printers, they can be used to make all sorts of objects, via additive manufacturing. However, many ‘makers’ (people who utilize their creative abilities to ‘make’ things) use more than just 3D printers when trying to visualize their ideas in creating tangible objects. CNC machining, as well as laser engravers are used by many individuals in creating complete products, made from a multitude of materials and processes. One problem with this, is that all of these processes currently require individual machinery. For example, many ‘makers’ end up needing to purchase, store, and operate a 3D printer,...
-
The Filastuder One question arises quite often when talking to people who utilize FDM 3D printers on a daily basis. What do you do with your 3D printed scraps and junk? When an object doesnÂ’t print correctly or when an object just simply is not wanted or needed any longer, where do they eventually end up? Most likely they get tossed in a the trashcan, and end up in a landfill for the next 500 years before the earth reclaims them. That filament that you paid $40/roll for becomes wasted money. One 15-year-old boy, named Grayson Galisky, has taken it...
-
Materials, materials, materials. When it comes to 3D printing, the biggest improvement that most in the industry wish to see, is the ability to print in more materials. Currently, most consumer level 3D printers are restricted to printing primarily in plastics, however, one 17-year-old from Virginia, named Sagar Govani, is well on his way to changing this. He is in the process of creating a 3D printer, more specifically a 3D printer extruder, that is capable of printing using metal filament. WeÂ’ve seen attempts at this before. For example, others have creating 3D printers that are basically robotic welding machines,...
-
Announced as far back as January, the efforts of founder Alex Bandar, COO Casey McCarty and Shop/Production Manger Matt Hatcher have finally come to fruition; the Columbus Idea Foundry — a 65,000 square ft. “makerspace” in the heart of Columbus, Ohio — is open in its brand new location. The new space, nestled in a downtown district called Franklinton, celebrated its official open house yesterday and it is going to mean a lot to central Ohio. What is it though? According to Hatcher and McCarty, it is “the largest community ‘makerspace’ on the planet.” Built in a 100-year-old shoe factory,...
-
The TIG process, utilized by StrongPrint With today's technology, we have seen some major progress being made within the 3D printing space. Within a couple of years, we have seen 3D printers go from being priced in the $2500+ range, to becoming as affordable as purchasing a video game console. Today, just about anyone can afford to purchase a 3D printer, yet mass adoption has not begun to take place. One of the reasons for this, is because of the limited number of materials that affordable consumer level 3D printers are capable of printing with. We are limited to the...
-
Recs 17 Back to Yahoo! Elon Musk Makes 3-D Printing History By Steve Heller | More Articles | Save For Later June 2, 2014 | Comments (6) SpaceX Dragon V2. Source: SpaceX.Wearing his hat as CEO of SpaceX, Elon Musk unveiled the future of space transport with the Dragon V2 spacecraft on Friday. Unlike Dragon V1, which was designed to carry cargo loads to and from the International Space Station, Dragon V2 will be able to transport up to seven humans to and from the ISS, and its robust thermal protection system makes the spacecraft capable of...
|
|
|