Posted on 02/18/2015 6:04:28 PM PST by 2ndDivisionVet
Weve seen an incredible amount of research hours and dollars being poured into an area where the miracle material graphene converges with what some may call a miracle technology in 3D printing. In this space, a whole slew of groundbreaking applications and processes may emerge as a better understanding of graphene, and how to 3D print it come about.
Weve discussed a company called Graphene 3D Lab in the past. They have been producing a graphene nanocomposite filament for typical FDM/FFF 3d printers. The problem with this filament, however, is the fact that most of the desirable properties of graphene, such as strength and weight, are lost since the graphene is usually mixed with a thermoplastic material. The only real useful property that remains is conductivity.
Back in December we also uncovered research being done by a group led by Seol Seung-kwon at the Korea Electrotechnology Research Institutes Nano Hybrid Technology Research Center (KERI), which concentrated on using a graphene oxide formula to print with, which resulted in pure graphene structures once the material was processed. According to the researchers they believed that such a process would be commercially available in only a few short years.
It appears as if the South Korean group is not alone in their research centering around the 3D printing of a graphene oxide material, as a group of researchers led by Dr. Esther García-Tuñon, a Research Associate at the Centre for Advanced Structural Ceramics at Imperial College London (ICL) have devised another method to this approach. In a paper published on January 21, 2015, in Advanced Materials, the researchers outlined this technique.
The method described relies on a graphene oxide paste consisting of graphene oxide along with a responsive polymer, which is able to change its behavior and structure when a chemical switch is activated.
Our formulations have the flow and physical properties we need for the filament deposition process required in 3D printing: They need to flow through very small nozzles and set 1f1immediately after passing through it, retaining the shape and holding the layers on top, Dr. Esther told Nanowerk. We use this two-dimensional material as building block to create macroscopic 3D structures and a technique called direct ink writing (DIW) also known as direct write assembly (DWA), or Robocasting.
The material used can be extruded out of a nozzle as small as 100 micron, meaning that very intricate objects are possible to print. The goal of the researchers is to 3D print pure graphene structures, not structures consisting of other materials mixed with graphene. The way this process works is that graphene oxide (chemically modified graphene) is extruded in paste-form to fabricate an object. Once the print is completed the object is treated thermally so that it recovers its pure graphene form. The next obvious step would be to scale this process up, as well as create new formulas for a variety of possible applications from oil absorption to flexible electronics.
I think there are still many challenges to overcome in both Additive Manufacturing and graphene technologies, explained García-Tuñon. The buzzword 3D printing is now everywhere; we can find many examples of commercially available 3D printers to make your own Hello Kitty, iPhone cases, and all sort of plastic models. But there is still a long way to go from here to the use of 3D printing for a wide variety of materials in multicomponent and practical devices.
With so many groups concentrating their efforts on the 3D printing of graphene, theres no doubt we are getting closer to commercial graphene printing. When that happens many industries may be turned upside down, including areas within solar energy, aerospace, and electronics.
Lets hear your thoughts on this work being done. Discuss in the 3D Printed Graphene forum thread on 3DPB.com. Check out the video below of Dr. Esther explaining her research:
(VIDEO-AT-LINK)
I’ve been following Graphene for a while now. I think it will change our future the way the invention of the light bulb did, or the internal combustion engine, etc. Very exciting.
However, at the current exponential increase in the speed of change, within 50 to 100 years, the world we will have created will not be fit for a normal human being. Seriously. Unaltered humans will be unable to cope - or survive for that matter.
This could be Hugh ...
Graphene.
Imagine inflatable buildings on the moon with Graphene walls so tough there would be no infrastructure and they would stop space debris. And movable graphene sunshades to control internal temperature.
I can only assume they would also be transparent so you’d have to paint the inside to protect from harmful radiation.
Cool Ping
Sadly, our use of wisdom is vastly outpaced by our use of knowledge.
#octomethylcyclobutane
Thanks for the bump. Interesting...
That is tagline-worthy, and one of the most profound statements I've read here in some time.
If you thought the last fifty years of technological progress was amazing hold on to your hat for the next fifty.
*sigh* Should be:
#octamethylcyclobutane
Yes, yes it is.
It ate your eight.
http://www.newyorker.com/magazine/2014/12/22/material-question
That's one of the themes in Arthur Koestler's Darkness at Noon. Rubaschov, the protagonist, works out the theory of the relative sophistication of a culture based the speed of its technological change. In other words, the quicker a society advances technologically, the relatively less sophisticated it becomes socially. For instance, the U.S. Constitution was a product of the Enlightenment, and it represents a very sophisticated adaptation to the technology of the 18th Century, which had not changed that much since the 1st century. Since the Industrial Age, technology has advance leaps and bounds, to the point where it would take a millennia for society just to catch up to where we are now.
Yeah, there is a reason you don’t give your car keys to an 8 year old.
You could be talking about putting multi-story buildings together in a few days with units that just snap together like legos...
Yeah, this type of thing could be revolutionary.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.