Posted on 01/08/2017 9:18:48 PM PST by Lorianne
The site may or not be click bait, but the issue is real. Or have you been fortunate and not had to buy a new appliance lately?
Tell me how a plumber can adjust your water pressure.
It is not illegal for a plumber to increase your water pressure.
Bought a water heater last year. Came with instructions for adjusting temperature. Took all of 30 seconds.
Article implies that this is difficult or impossible to do.
Our house was built in 1978. Recently had our plumber friend come out and go through our toilet lines. Long story but he was in awe of our pressure. Said it was way over govt regulations. Shhhhh
There is one serious problem with such a modification.
When the tank is in the original position, if the toilet plugs you can easily take the tank cover off and close the flushing valve.
If the tank is on the next floor and the toilet plugs...................how are you going to stop the overflow?
Thanks for the Cascade Commercial Dishwasher Soap reference, been looking for something like that for years.
I’m ordering 2 boxes from Amazon right now.
Have a 12 year old topload Whirlpool washer.
Agitator gear broke last year so when the repair guy came out I said, “diagnose it and if it cost too much, time for a new washer.”
He told me to try to keep the old machine going as long as possible because the new one on the market are crap. So, $100 later, still have the old machine just cleaning away.
I bought 3 shower heads last year. Restrictions popped out with tweesers. I have more flow than I had with the originals installed when the house was built.
The fill valve should still be located adjacent to the seat.
Never smelled so much BO as when in Paris last year... gagged on the metro/train whenever we had to go somewhere
Yes, but the flush valve, the one which releases the flushing water from the tank is in the tank itself.
Not saying that such a setup won’t work, it will flush like crazy, but short of putting a valve in the downline near the toilet itself there isn’t any way to avoid a flood under dire circumstances.
Re: front-loaders wash WELL?
Not my Bosh.
I can’t wait for the darn thing to die.
I bought the biggest one available at the time because I don’t care to drag my blankets, sleeping bags etc. to the laundromat.
Still have to, because it doesn’t put in enough water so I have to either lug and lift jugs of water to add more each wash and rinse or make the trip to town. Otherwise the cloths just roll around rubbing on the front and wear away the fabric.
I’m getting too old for this.
My farmer has one of those with short agitator and it gets their grubby farm gear clean.
Nice!
I didn’t need adjustments to my front load washer and mostly do a 34 minute quick wash that is the best I’ve had. Cleans the best.
Bosh makes some of the best stuff in the world. Maybe you do indeed get too little water and need to bypass that by turning the screw to the right on the applicable solenoid. Consult YouTube about that.
Easy to do, pull cover, turn screw clockwise some and close up.
bump
“Not saying that such a setup wont work, it will flush like crazy, but short of putting a valve in the downline near the toilet itself there isnt any way to avoid a flood under dire circumstances.”
If you flush and see it clogged it has already dumped the tank ....
Anyone with a wrench, screwdriver, and some gumption beyond the couch can change each of these things.
Just don't put them in your carry-on bag. I'm sure TSA would confiscate.
No problem, I drive there from CA.
Just a four hour drive.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.