|
Posted on 02/03/2004 12:00:11 AM PST by SAMWolf
|
|
 are acknowledged, affirmed and commemorated.
|
| Our Mission: The FReeper Foxhole is dedicated to Veterans of our Nation's military forces and to others who are affected in their relationships with Veterans. In the FReeper Foxhole, Veterans or their family members should feel free to address their specific circumstances or whatever issues concern them in an atmosphere of peace, understanding, brotherhood and support. The FReeper Foxhole hopes to share with it's readers an open forum where we can learn about and discuss military history, military news and other topics of concern or interest to our readers be they Veteran's, Current Duty or anyone interested in what we have to offer. If the Foxhole makes someone appreciate, even a little, what others have sacrificed for us, then it has accomplished one of it's missions. We hope the Foxhole in some small way helps us to remember and honor those who came before us.
|
|
(PzKpfw IV)  Most postwar publications on German armor of WW II tend to overemphasize the importance of the Tiger and Panther. These vehicles, while undoubtedly making quite an impression on their opponents during their somewhat limited appearance on the battlefield, should be considered as derivatives of the PzKpfw III and IV. These two tanks established the reputation of the German armored forces, and demonstrated the most advanced technical and tactical features of their time. Production of the PzKpfw IV was originally intended to be on a limited scale. Only the designer Krupp was engaged, while the PzKpfw III production was divided among eight major companies.  Ausf. C with 30mm 'Zusatzpanzer' on the hull front The PzKpfw IV was originally given a limited role as a 75mm gun (75mm Kw.K. L/24) support vehicle for the PzKpfw III, which was equipped with a 37mm gun, to complete the quartet of basic pre-war tank models, but it became the vital backbone of the Panzer force, more of this type being built than of any other. The sound principles used in the design of the chassis allowed it to be progressively up-gunned and up-armored so that it was expedient to continue production up to the end of the war, when some 8500 had been built. The turret ring was sensibly constructed with sufficient diameter to permit up-gunning without radical re-design. The PzKpfw IV used leaf springs, in contrast to the PzKpfw III, Panther and Tiger, who employed a torsion bar suspension. As the up-gunning and up-armoring process continued, the forward springs remained constantly bowed under heavy pressure, causing the vehicle to yaw badly.  Ausf. C with improvised box on the turret rear One man most instrumental in the design of the PzKpfw IV was the creator of the German Panzertruppe, Colonel-General Heinz Guderian, who had laid down the basic prerequisites for armored fighting vehicles as early as 1933-34. These were mobility, fire-power, armor protection and communication. A five-man crew was also considered essential, as this allowed for a distinct allocation of duties between the crew, an advantage both in training and and in battle, which gave German tanks their marked tactical superiority over their Allied counterparts despite other shortcomings. For example, in contrast to the German three-man turret crews that worked as a team, the French preferred one-man turrets, which required the vehicle commander to act as his own loader and gunner with the result that he performed neither of these functions well under pressure.  PzKpfw IV Ausf. D with the short-barreled gun In spring 1935, Krupp, Rheinmetall, and MAN all sent in designs to fit the specifications drawn up by the Heereswaffenamt. This vehicle was known under the cover designation of Battalionsführer Wagen (BW), and the Krupp design was chosen for production. Prototype trails took place at Ulm and Kummersdorf in 1937. As with the PzKpfw III, some pre-production models were built in small numbers for trails. Three models, Ausf. A, B and C, had been built by 1939, and the few vehicles available took part in the Polish campaign, painted in the usual dark blue-grey of the German Army. There was little variety in detail, and also in the period 1939-1941 little was changed, for in service the PzKpfw IV was fulfilling its role. With the outbreak of the war the design was 'frozen' and large scale production was ordered as the Ausf. D. However the PzKpfw IV was destined to supplant the PzKpfw III as the mainstay of the panzer divisions, for its larger size allowed more efficient up-gunning and up-armoring.  Replacing the engine The only opposition encountered in Poland came from 37mm anti-tank guns, and losses were light. As a result of experience in Poland, armor protection had to be upgraded, but plans to increase the superstructure front to 50mm were delayed, which resulted in the acquirement of 30mm 'Zusatzplatten' (supplemental armor) for the PzKpfw IV Ausf. E. During the invasion of France in 1940, the superior deployment of German armor proved decisive, and neither the protection nor the fire power was greatly improved. The same story was repeated during the Balkan campaign of 1941 and the first appearance of the PzKpfw IV in North Africa. During this time, the PzKpfw III had replaced the obsolete PzKpfw I and PzKpfw II and fought, already up-gunned with a 50mm gun, most of the tank battles.  A British destroyer was sunk by a PzKpfw IV in the Boulogne harbor, May 23 1940 Against the PzKpfw III, the PzKpfw IV's production was modest, as in 1941 only 480 vehicles were produced, despite an order for 2160 vehicles to equip the planned 36 armored divisions. Originally the main assembly was at Krupp, with hulls and turrets supplied by krupp and Eisen, but due to Allied air raids new key war industries were relocated to areas not readily accessible to the bombers. One of the new tank factories taking on the PzKpfw IV production was Nibelungenwerken in Austria, were the production and assembly remained till the end of the war  Ausf. E of the 11. Pz.Div. in the Balkans, 1941 The PzKpfw IV hull was a simple design, with high-quality steel plates made by the electric furnace process, and austenitic steel weld joints. Two bulkheads separated the hull into three compartments: driving, fighting and engine. The front driving compartment housed the transmission and final drive assemblies as well as seats for the driver and radio operator/hull gunner. The superstructure was bolted to the top flange of the hull, and the welded turret had sloped sides. The commander's cupola on the back of the turret roof had five observation ports equally spaced around it with the front port pointing directly forward in line with the main gun.  PzKpfw IV Ausf. E with 30mm Zusatzpanzer The main power plant was the standard medium tank engine, the Maybach HL120 TRM, a 12-cylinder liquid-cooled petrol engine. Cooling air entered through louvres on the left hand side of the engine compartment, and was drawn over the engine by two fans. An exceptionally large filter provided clean air for the power plant. Track tension was adjusted by a large diameter idler wheel mounted on an eccentric axle at the rear of the vehicle. the suspension system consisted of fout bogie units per side, each of which was fitted with two rubber-tyred wheels. Quarter elliptic springs were mounted on the underside of the leading axle arm of each bogie. The other end of the spring rested on a shackle pin and roller, carried on an extension of the trailing axle arm. Four support rollers per side completed the suspension.
|
Yep, Cheaper, bigger gun on same chassis and lower silhouette.
Panzerkampfwagen IV Ausf J of 111th Panzer Brigade, 2111th Panzer Abteilung, Staff Company, Lorraine, France in September of 1944.
In June of 1944, Ausf J, the final variant of Panzerkampfwagen IV tank family entered production as a replacement for Ausf H (10 Serie BW). Its production did not cease until March 1945 with 2970 produced solely by Nibelungenwerke and in small number by Vomag. This medium tank received a designation of Sd.Kfz.161/2. Chassis numbers for Ausf J were approx.86394 to 86573 and unknown to approx.89541.
As part of the German help during the summer of 1944, Finland bought 15 PzK IV Ausf. J tanks. Finland was supposed to receive 15 tanks per month - the end of hostilities with the Soviet Union and start of the Lapland War against the German troops ended deliveries. Only the first batch of 15 tanks was received - they saw no action against the Soviets, but they were used in the Lapland War against German forces.
Panzerkampfwagen IV Ausf G Sd Kfz 161/1 und 161/2
Shown is an early model G. Later models were equipped with "Schurzen" (side plates designed to help deflect hollow charge projectiles). This vehicle was known as the Maybach T-IV by the Bulgarians. 46 units were obtained, though in the book "Equipment and armor in the Bulgarian Army-Armored Vehicles 1935-45" by Kaloyan Matev, he says the number was 97.
PanzerKampfwagen IV Ausf. A-J and more
Panzerkampfwagen IV mit 7.5 cm L/48
Bovington Camp - Tankmuseum
M5A1 Stuart Light Tank, Serial Number 3887
Figures, it's always about the money!
Sam says next time I visit he's going to make sure I watch this movie.
tsk, tsk. LOL.
I've always thought it would be fun to have one of these. I bet they're great in traffic!
Well that's good to hear!!! Actually these guys aren't my type. You know the Brits they just don't appear to, um....um...Well they just aren't manly looking enough imo! LOL.
Everytime I hear the song "I've Been working on the railroad" I see those Shermans coming out of that tunnel.
Kelly's Heroes is definately one of the best WWII movies ever made.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.
