Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Dry-run experiments verify key aspect of Sandia nuclear fusion concept
Sandia National Lab ^ | 09/17/12 | Sandia National Lab

Posted on 09/19/2012 10:14:10 AM PDT by Moonman62

ALBUQUERQUE, N.M. — Magnetically imploded tubes called liners, intended to help produce controlled nuclear fusion at scientific “break-even” energies or better within the next few years, have functioned successfully in preliminary tests, according to a Sandia research paper accepted for publication by Physical Review Letters (PRL).

Sandia researcher Ryan McBride pays close attention to the tiny central beryllium liner to be imploded by the powerful magnetic field generated by Sandia’s Z machine. The larger cylinders forming a circle on the exterior of the base plate measure Z’s load current by picking up the generated magnetic field. (Photo by Randy Montoya) Click on the thumbnail for a high-resolution image.

To exceed scientific break-even is the most hotly sought-after goal of fusion research, in which the energy released by a fusion reaction is greater than the energy put into it — an achievement that would have extraordinary energy and defense implications.

That the liners survived their electromagnetic drubbing is a key step in stimulating further Sandia testing of a concept called MagLIF (Magnetized Liner Inertial Fusion), which will use magnetic fields and laser pre-heating in the quest for energetic fusion.

In the dry-run experiments just completed, cylindrical beryllium liners remained reasonably intact as they were imploded by huge magnetic field of Sandia’s Z machine, the world’s most powerful pulsed-power accelerator. Had they overly distorted, they would have proved themselves incapable of shoveling together nuclear fuel — deuterium and possibly tritium — to the point of fusing them. Sandia researchers expect to add deuterium fuel in experiments scheduled for 2013.

“The experimental results — the degree to which the imploding liner maintained its cylindrical integrity throughout its implosion — were consistent with results from earlier Sandia computer simulations,” said lead researcher Ryan McBride.“These predicted MagLIF will exceed scientific break-even.”

A simulation published in a 2010 Physics of Plasmas article by Sandia researcher Steve Slutz showed that a tube enclosing preheated deuterium and tritium, crushed by the large magnetic fields of the 25-million-ampere Z machine, would yield slightly more energy than is inserted into it.

A later simulation, published last January in PRL by Slutz and Sandia researcher Roger Vesey, showed that a more powerful accelerator generating 60 million amperes or more could reach “high-gain” fusion conditions, where the fusion energy released greatly exceeds (by more than 1,000 times) the energy supplied to the fuel.

These goals — both the near-term goal of scientific break-even on today’s Z machine and the long-term goal of high-gain fusion on a future, more powerful machine — require the metallic liners to maintain sufficient cylindrical integrity while they implode.

The liner is intended to contain fusion fuel like a can holds peanut butter, and push it together in nanoseconds like two semicylindrical shovels compacting snow together.

An element of drama is present because the metallic liner doing the compressing is also being eaten away as it conducts the Z machine’s enormous electrical current along its outer surface. This electrical current generates the corresponding magnetic field that crushes the liner, but under the stress of passing that current, the outer surface of the liner begins to vaporize and turn into plasma, in much the same way as a car fuse vaporizes when a short circuit sends too much current through it. As this happens, the surface begins to lose integrity and becomes unstable. This instability works its way inward, toward the liner’s inner surface, throughout the course of the implosion.

“You might say: The race is on,” said McBride. “The question is, can we start off with a thick enough tube such that we can complete the implosion and burn the fusion fuel before the instability eats its way completely through the liner wall?

“A thicker tube would be more robust in standing up to this instability, but the implosion would be less efficient because Z would have to accelerate more liner mass. On the flip side, a thinner tube could be accelerated to a much higher implosion velocity, but then the instability would rip the liner to shreds and render it useless,” he continues. “Our experiments were designed to test a sweet spot predicted by the simulations where a sufficiently robust liner could implode with a sufficiently high velocity.”

By following the dimensions proposed by the earlier simulations, the physical test proved successful and the liner walls maintained their integrity throughout the implosion.

Radiographs taken at nanosecond intervals depicted the implosion of the initially solid beryllium liner through to stagnation — the point at which an implosion stops because the liner material has reached the cylinder’s central axis. The images show the outer surface of the imploding liner distorting until it resembles threads on a bolt. However, the more crucial inner surface remains reasonably intact all the way through to stagnation.

Said McBride’s manager Dan Sinars, “When Magnetized Liner Inertial Fusion was first proposed, our biggest concern was whether the instabilities would disrupt the target before fusion reactions could occur. We had complex computer simulations that suggested things would be OK, but we were not confident in those predictions. Then McBride did his experiments, using liners with the same dimensions as our simulations, and the outcomes matched. We are now confident enough to take the next steps on the Z facility of integrating in the new magnetic field and laser preheat capabilities that will be required to test the full concept. Consequently, we intend to take those first integration steps in 2013.”

Slated for December are the first tests of the final two components of the MagLIF concept: laser preheating to put more energy into the fuel before magnetic compression begins, and the testing of two secondary electrical coils placed at the top and bottom of the can. Their magnetic fields are expected to keep charged particles from escaping the hot fuel horizontally. This is crucial because if too many particles escape, the fuel could cool to the point where fusion reactions cease.

Sandia researchers intend to test the fully integrated MagLIF concept by the close of 2013.

“This work is one more step on a long path to possible energy applications,” said Sandia senior manager Mark Herrmann.

The liner implosion experiments also served to verify that simulation tools like the popular LASNEX code are accurate within certain parameters, but may diverge when used beyond those limits — information of importance to other labs that use the same codes.

McBride will give an invited talk on his work this fall at the American Physical Society’s annual Division of Plasma Physics meeting in Providence, RI. He is also preparing an invited paper for Physics of Plasmas to explain the PRL results in greater depth.

The work was funded by Sandia’s Laboratory Directed Research and Development program and the National Nuclear Security Administration.

Sandia National Laboratories is a multi-program laboratory operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin company, for the U.S. Department of Energy’s National Nuclear Security Administration. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major R&D responsibilities in national security, energy and environmental technologies and economic competitiveness.

Sandia news media contact: Neal Singer, nsinger@sandia.gov, (505) 845-7078


TOPICS: Business/Economy; Government; News/Current Events
KEYWORDS: energy; fusion; hotfusion
Navigation: use the links below to view more comments.
first 1-2021-22 next last
This is actually nuclear weapons research, but if it works for energy production, so much the better.
1 posted on 09/19/2012 10:14:20 AM PDT by Moonman62
[ Post Reply | Private Reply | View Replies]

To: Moonman62
This must be what Iran is really working on .... /s
2 posted on 09/19/2012 10:22:29 AM PDT by Ken522
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

Too late. Cold fusion machines are now working everywhere. /s


3 posted on 09/19/2012 10:27:26 AM PDT by ZX12R (FUBO GTFO 2012 !)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

energy too cheap to meter..


4 posted on 09/19/2012 10:41:06 AM PDT by RitchieAprile
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62
Z-pinch is interesting, but like the NIF's laser fusion, this is a "putt-putt" motor, not a continuous reaction. Still, Z-pinch might end up being the first commercially-viable hot fusion.

So-called "cold fusion" (really Low-Energy Nuclear Reactions or LENR) has promise, too, but probably will not scale very well.

5 posted on 09/19/2012 10:45:56 AM PDT by backwoods-engineer (My game is disruption. I will use lethal force --my vote-- in self-defense against Obama.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62
crushed by the large magnetic fields of the 25-million-ampere Z machine, would yield slightly more energy than is inserted into it.

Don't get too excited about this. Even if it works (REAL TEST in 2013) slightly better than break even energy isn't enough, You have to take into account the thermodynamics of converting heat into electricity which runs at about 33% in a thermal power plant, so you have to generate about three times the energy required to initiate the fusion just to break even on the electric bill. I've been keep up with the literature on fusion energy generation since the middle 60's and the breakthrough has always been just around the corner.

6 posted on 09/19/2012 10:46:05 AM PDT by from occupied ga (Your government is your most dangerous enemy)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

Reusablity seems to be what Sandia was missing.
Previously they used Tungsten threads instead of Be cylinders. The Tungsten was vaporized on each firing.

In theory with multiple reactors, it would run like a very large pulse reactor, one firing while the rest were re-loaded.

Very interesting!


7 posted on 09/19/2012 10:48:03 AM PDT by Zathras
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

Now when my 8-year-old son asks what a “MILF” is, I can tell him “Magnetized Inertial Linear Fusion.”


8 posted on 09/19/2012 10:50:00 AM PDT by mvpel (Michael Pelletier)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

“This is actually nuclear weapons research, but if it works for energy production, so much the better.”

Yes, of course. Under pressure to cite/publish muslim success stories so that even Freepers will be excited......


9 posted on 09/19/2012 10:50:17 AM PDT by treetopsandroofs (Had FDR been GOP, there would have been no World Wars, just "The Great War" and "Roosevelt's Wars".)
[ Post Reply | Private Reply | To 1 | View Replies]

To: ZX12R
Stanley Pons and Martin Fleischmann demonstrated cold fusion in '89...but, alas...

... they were not in the right discipline...

..they were mere ignorant & lowly PhD Chemists....not more superior PhD Physicists....

...how in the world could a chemist possibly be smart enough to do the cyphering that it takes to even know what a fusion reaction looks like?

10 posted on 09/19/2012 10:52:49 AM PDT by B.O. Plenty (Elections have consequences....)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Moonman62

“You didn’t build that”


11 posted on 09/19/2012 10:58:34 AM PDT by printhead (Standard & Poor - Poor is the new standard.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: B.O. Plenty
Stanley Pons and Martin Fleischmann demonstrated cold fusion in '89

Uh huh. Suuuuuuuurrrrre they did.
12 posted on 09/19/2012 11:00:11 AM PDT by ZX12R (FUBO GTFO 2012 !)
[ Post Reply | Private Reply | To 10 | View Replies]

To: from occupied ga
Don't get too excited about this. Even if it works (REAL TEST in 2013) slightly better than break even energy isn't enough,

They are claiming that 1000 times input energy is technically feasible.

You have to take into account the thermodynamics of converting heat into electricity which runs at about 33% in a thermal power plant, so you have to generate about three times the energy required to initiate the fusion just to break even on the electric bill.

I've frequently seen 10 times as the multiple for making money.

13 posted on 09/19/2012 11:02:03 AM PDT by Moonman62 (The US has become a government with a country, rather than a country with a government.)
[ Post Reply | Private Reply | To 6 | View Replies]

To: mvpel
Now when my 8-year-old son asks what a “MILF” is, I can tell him “Magnetized Inertial Linear Fusion.”

LOL! I'd have to write it on a slip of paper to remember it, though.

14 posted on 09/19/2012 11:05:23 AM PDT by Moonman62 (The US has become a government with a country, rather than a country with a government.)
[ Post Reply | Private Reply | To 8 | View Replies]

To: Moonman62
I've frequently seen 10 times as the multiple for making money.

Sounds about right

They are claiming that 1000 times input energy is technically feasible.

Cynicism is always called for when reading about fusion energy claims.

15 posted on 09/19/2012 11:12:48 AM PDT by from occupied ga (Your government is your most dangerous enemy)
[ Post Reply | Private Reply | To 13 | View Replies]

To: Moonman62

And one thing I forgot to mention, Tritium is considerably easier (but still not easy) to fuse than deuterium, but results in a much dirtier fusion reaction. Tritium fusion produces copious quantities of neutrons which then transmute most of the surrounding structure into radioactive isotopes of the original material.


16 posted on 09/19/2012 11:16:31 AM PDT by from occupied ga (Your government is your most dangerous enemy)
[ Post Reply | Private Reply | To 13 | View Replies]

To: from occupied ga

Absolutely. And they still have the big test in 2013. I find that skepticism is called for in response to all scientific press releases.


17 posted on 09/19/2012 11:17:37 AM PDT by Moonman62 (The US has become a government with a country, rather than a country with a government.)
[ Post Reply | Private Reply | To 15 | View Replies]

To: Moonman62

I don’t think so. They are trying to duplicate what happens in a Teller-Ulam thermonuclear device, without the fission (a-bomb) trigger... We can already do this sort of reaction, just not real controlled and at this small scale...


18 posted on 09/19/2012 11:25:52 AM PDT by LaRueLaDue
[ Post Reply | Private Reply | To 1 | View Replies]

To: Moonman62

My understanding was that, under the Emperor’s green-energy dictates, they were going to use a wind-farm output to trigger the actual fusion process.


19 posted on 09/19/2012 2:26:43 PM PDT by SuperLuminal (Where is another agitator for republicanism like Sam Adams when we need him?)
[ Post Reply | Private Reply | To 1 | View Replies]

To: from occupied ga
...I've been keep up with the literature on fusion energy generation since the middle 60's and the breakthrough has always been just around the corner 20 years in the future.

I didn't start following fusion until the 70's.

20 posted on 09/19/2012 3:11:50 PM PDT by DrDavid (George Orwell was an optimist.)
[ Post Reply | Private Reply | To 6 | View Replies]


Navigation: use the links below to view more comments.
first 1-2021-22 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson