Free Republic
Browse · Search
News/Activism
Topics · Post Article

To: DBrow
At a minimum, you need the NFPA diamond symbol on each bottle, along with the name of the chemical and most hazardous materials.

I can see having an MSDS available, but relabeling every bottle is ridiculous.

13 posted on 06/25/2012 4:07:10 PM PDT by Sarajevo (Ever notice that when a beggar gets a donation, they immediately put their hand out for more.)
[ Post Reply | Private Reply | To 9 | View Replies ]


To: Sarajevo

I agree, if all you have is one chemical like Hoppe’s 9. But the regs are written for the case, typical in industry, where you have several.

I worked in a lab that used denatured ethanol, methanol, isopropyl alcohols, solder rosin, solder rosin cleaner, DI water, some sort of chlorinated stuff, plus various adhesives. Once you get them out of the 5 gal cans and into dispenser bottles, which one is which?

On top of the safety issues (different flammabilities and toxicities), there are production quality issues like putting the chlorinated stuff on a plastic lens, or trying to clean solder residues with DI water. So the lab had a label on each bottle. You can buy bottles pre-labeled if you are dealing with common stuff.

I don’t think there is a separate OSHA standard for a shooting range (and I deeply hope there never will be!). I think they apply the same published standards to all workplaces. There are special concerns, like trenching or the use of overhead lifts and scissor jacks, but they apply to the condition not the industry. When the inspector sees little bottles of some chemical all over, he applies the standard for “chemicals in the workplace”.

They could be dinged for hazmat if they chuck the patches in regular trash, too, since swabs and wipes become hazmat once they touch a hazardous material.


14 posted on 06/25/2012 4:39:10 PM PDT by DBrow
[ Post Reply | Private Reply | To 13 | View Replies ]

To: Sarajevo

http://www.2spi.com/catalog/plasticware/safety-labeled-wash-bottles.php

This is what OSHA expects, which you will never see at a range. Plus, if you put tape on the Hoppe’s bottle, it will get Hoppe’d off once the kero-EtOH gets to it. My big bottle lost it’s label and I’ve put various stickies on it.

At the place I’m currently contracted, even the maintenance staff has a label on everything, all those squirt bottles.


15 posted on 06/25/2012 4:48:58 PM PDT by DBrow
[ Post Reply | Private Reply | To 13 | View Replies ]

Free Republic
Browse · Search
News/Activism
Topics · Post Article


FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson