Posted on 06/11/2011 5:55:50 AM PDT by equaviator
A Detroit entrepreneur surprised university engineers here recently, when he invented a heat-treatment that makes steel 7 percent stronger than any steel on record in less than 10 seconds.
In fact, the steel, now trademarked as Flash Bainite, has tested stronger and more shock-absorbing than the most common titanium alloys used by industry.
Now the entrepreneur is working with researchers at Ohio State University to better understand the science behind the new treatment, called flash processing.
What they've discovered may hold the key to making cars and military vehicles lighter, stronger, and more fuel-efficient.
In the current issue of the journal Materials Science and Technology, the inventor and his Ohio State partners describe how rapidly heating and cooling steel sheets changes the microstructure inside the alloy to make it stronger and less brittle.
The basic process of heat-treating steel has changed little in the modern age, and engineer Suresh Babu is one of few researchers worldwide who still study how to tune the properties of steel in detail. He's an associate professor of materials science and engineering at Ohio State, and Director of the National Science Foundation (NSF) Center for Integrative Materials Joining for Energy Applications, headquartered at the university.
"Steel is what we would call a 'mature technology.' We'd like to think we know most everything about it," he said. "If someone invented a way to strengthen the strongest steels even a few percent, that would be a big deal. But 7 percent? That's huge."
Yet, when inventor Gary Cola initially approached him, Babu didn't know what to think.
"The process that Gary described it shouldn't have worked," he said. "I didn't believe him. So he took my students and me to Detroit."
Cola showed them his proprietary lab setup at SFP Works, LLC., where rollers carried steel sheets through flames as hot as 1100 degrees Celsius and then into a cooling liquid bath.
Though the typical temperature and length of time for hardening varies by industry, most steels are heat-treated at around 900 degrees Celsius for a few hours. Others are heated at similar temperatures for days.
Cola's entire process took less than 10 seconds.
He claimed that the resulting steel was 7 percent stronger than martensitic advanced high-strength steel. [Martensitic steel is so named because the internal microstructure is entirely composed of a crystal form called martensite.] Cola further claimed that his steel could be drawn that is, thinned and lengthened 30 percent more than martensitic steels without losing its enhanced strength.
If that were true, then Cola's steel could enable carmakers to build frames that are up to 30 percent thinner and lighter without compromising safety. Or, it could reinforce an armored vehicle without weighing it down.
"We asked for a few samples to test, and it turned out that everything he said was true," said Ohio State graduate student Tapasvi Lolla. "Then it was up to us to understand what was happening."
Cola is a self-taught metallurgist, and he wanted help from Babu and his team to reveal the physics behind the process to understand it in detail so that he could find ways to adapt it and even improve it.
He partnered with Ohio State to provide research support for Brian Hanhold, who was an undergraduate student at the time, and Lolla, who subsequently earned his master's degree working out the answer.
Using an electron microscope, they discovered that Cola's process did indeed form martensite microstructure inside the steel. But they also saw another form called bainite microstructure, scattered with carbon-rich compounds called carbides.
In traditional, slow heat treatments, steel's initial microstructure always dissolves into a homogeneous phase called austenite at peak temperature, Babu explained. But as the steel cools rapidly from this high temperature, all of the austenite normally transforms into martensite.
"We think that, because this new process is so fast with rapid heating and cooling, the carbides don't get a chance to dissolve completely within austenite at high temperature, so they remain in the steel and make this unique microstructure containing bainite, martensite and carbides," Babu said.
Lolla pointed out that this unique microstructure boosts ductility -- meaning that the steel can crumple a great deal before breaking making it a potential impact-absorber for automotive applications.
Babu, Lolla, Ohio State research scientist Boian Alexandrov, and Cola co-authored the paper with Badri Narayanan, a doctoral student in materials science and engineering.
Now Hanhold is working to carry over his lessons into welding engineering, where he hopes to solve the problem of heat-induced weakening during welding. High-strength steel often weakens just outside the weld joint, where the alloy has been heated and cooled. Hanhold suspects that bringing the speed of Cola's method to welding might minimize the damage to adjacent areas and reduce the weakening.
If he succeeds, his discovery will benefit industrial partners of the NSF Center for Integrative Materials Joining Science for Energy Applications, which formed earlier this year. Ohio State's academic partners on the center include Lehigh University, the University of Wisconsin-Madison, and the Colorado School of Mines.
Read Atlas Shrugged.
Expect this metal to be outlawed or regulated to death.
Rearden Steel.
God blesses the USA again!
How much steel do we even still manufacture? Would be great if we held the secret to this but it sounds like this won’t be hard for anyone making steel to use these concepts.
This is impossible to be true.....government isn’t funding it G
/ S
They are talking about stainless steel. Will is be as corrosion resistant as the 300 series and left unfinished?
I also wonder what grade that 7% increase refers to. Stainless guns and knives are made if 400 series, but they can rust.
Will it combine the best of both like a precipitation hardening martensitic?
O M G ... a new kind of steel. How disruptive to the existing steel makers. We must have a czar. Reardon Metal cannot be allowed to hurt the other steelmakers.
Just sent this link to my recent graduate mechanical engineer, son. He is currently showing off his ‘senior project’, transmission on the Baha car they built..at the SAE Baha car races at the Catepillar proving grounds in Illinois....
there was heat treating done on the gears, shafts etc, he cut on the cnc machines...and this might be a better way...at least a quicker way.
Lolla pointed out that this unique microstructure boosts ductility -- meaning that the steel can crumple a great deal before breaking making it a potential impact-absorber for automotive applications.
Seems contradictory to me. Harder steel always tends to shatter more easily.
1.) When vehicles made from this metal collide with smaller hybrid vehicles there will be more destruction to the hybrid.
2.) The process for producing this metal will not be environmentally friendly.
3.) The nature of this metal makes it more dangerous to work with and will require new union contracts to protect the workers.
4.) This new metal will be too successfull and will put current steel workers out of a job. The traditional way of producing steel will need to be subsidised.
bttt
Or be unionized to the oblivion.
Not a new concept, heat induction coil for steel hardening has been around a long time. It is How we made razor blades for years. Plus many other things. Trying watching how it is made sometime.
Its been done before...
Indeed .... I have recently taken up the hobby of forging my own knives an wood carving tools etc... Heat treating , tempering is a black art I still need to master. This story is very interesting .
Good luck to your sons project.
Not only no gubmint subsidy but no advanced degrees. You're right, this must be a hoax.
Maybe that's why the excitement. Perhaps it challenges the rule. I know only a glancing bit about induction heating in mettalurgy due to my father-in-law, a self-taught, experienced but very savvy technician in the business. Worked for Taylor Winfield for years. Kind of guy like this Cola, probably. While steel may be a mature industry there seems always to be something of an art to the processing.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.