Posted on 03/08/2011 11:47:32 AM PST by King_Corey
The M14 Enhanced Battle Rifle The changing nature of the war in Afghanistan led to the re-issue of the 7.62x51 mm NATO M14 rifle. By Maj. John Plaster, U.S. Army (Ret.) Not long after U.S. forces invaded Afghanistan, al-Qaeda and its Taliban allies came to realize that Americas 5.56x45 mm NATO infantry rifles lost most of their lethality beyond 500 meters. Demonstrating their adaptability, the insurgents exploited Afghanistans sprawling valleys and distant mountainsides to seek engagements beyond the M16s and M4s effective ranges.
This is borne out by U.S. Army data, which reveals that more than half of the wars small arms engagements are now beyond 500 meters, with the enemy employing heavier weapons and then withdrawing before air support or artillery fire can arrive.
One solution, military planners could see, was employing a more capable cartridge already in the system: the 7.62x51 mm NATO. Todays standard U.S. sniper cartridge, the 175-grain, M118 Long Range load, delivers four times the foot-pounds of energy as the standard 62-grain, 5.56 mm round at extended ranges. In other words, at 600 meters the 7.62 mm round packs about as much energy1,000 ft.-lbs.as the 5.56 mm round at 100 meters.
Although M14 rifles were pulled from depot storage, fitted with scopes, shipped to Afghanistan and issued to Army and Marine designated riflemen, the guns proved less than ideal for todays warfare. First, their fixed stocks could not be adjusted to fit the length-of-pull needed for todays body armor. And second, the 40-year-old rifles could not accommodate modern accessories such as lasers, night vision scopes and lights, which require MIL STD 1913 Picatinny rails. Fortunately, a solution had already been developed by the U.S. Navys Surface Warfare Center at Crane, Ind.
The SEAL CQB Rifle One year before the 2001 terrorist attacks, U.S. Navy SEALs had gone to Crane to request an updated version of the 42-year-old M14. Great believers in the M14s reliability and the 7.62x51 mm NATO cartridges lethality, they wanted a shortened version with a pistol grip and adjustable-length buttstock for close-quarters use.
The design task fell to David Armstrong, an accomplished small arms engineer who previously had developed the well-received SOPMOD (Special Operations Peculiar Modification System) for the M4 carbine. A mechanical engineer, machinist and recreational shooter, Armstrong began by searching for an off-the-shelf collapsible buttstock.
After trying several, he chose a Sage Intl collapsible, pistol-grip stock made for the Remington Model 870 shotgun. The telescoping design offered five lengths of pull, in 1-inch increments, that worked well with body armor. Armstrong connected the Sage buttstock to the forward section of a modified M14 fiberglass stock. He also replaced the rifles standard 22-inch barrel with an 18-inch unit, reducing its overall length by nearly 10 inches, to 35 inches.
The fiberglass stock, however, did not satisfy him. The [M14] design has always been tough to beat for reliability, but required laborsome bedding and tuning for best accuracy, he explained. Earlier sniper versions of the M14, especially the M21 Sniper System, which used a resin-impregnated stock with epoxy bedding, proved so temperamental that snipers were instructed not to remove the action from the stock while cleaning it.
Armstrong took the bold step of designing his own chassis stock, machined from aircraft-grade aluminum. Not only would this be more rigid than fiberglass, but it would include an aluminum bedding block and an assortment of Picatinny rails for optical and illumination accessories. The result was a true drop-in stock, requiring no bedding or special fitting. This stock floats the gas system through a replacement operating rod guide screwed to the rigid stock fore-end and a simple spacer replacing the front band, he said. He also modified the Sage buttstocks cheek rest to give it 2 inches of vertical adjustment in 1/4-inch increments.
In addition to installing quad Picatinny rails around the fore-end, he attached a short-rail scope mount that replaced the M14s stripper clip guide. The final additions were a more effective flash suppressor, three ambidextrous 1 1/4-inch sling slot locations, and a Harris Engineering S-LM Series S bipod. Patented to the U.S. Navy with Armstrong as its inventor, the chassis stock is now produced under license by Sage Intl in Oscoda, Mich.
Simply adding the chassis stock system cut the group size of a basic M14 in half without the need for glass-bedding, he reports. Firing five-shot groups with M118 ammunition at 600 yards, Naval technicians at Crane recorded 2 to 2.5 minute-of-angle (m.o.a.) extreme spreadsmeaning 12 to 18-inch groups. Standard M80 ball ammunition shot nearly as well.
The EBR & EMR When the U.S. Army and Marine Corps later sought modernized M14s, Armstrong merely switched the Navys Mk. 14 Mod 0 rifles short barrel for a full-length 22-inch version to create the Armys Enhanced Battle Rifle (EBR) and the Marines M39 Enhanced Marksmans Rifle (EMR). These versions measure 38.5 inches overall, with the stocks collapsed, and 45 inches when fully extended.
Although 3 pounds heavier than the standard M14, the EBR and EMR compare favorably to Americas current 7.62 mm sniping platforms, such as the Armys M24 and M110, and the Marine Corps M40A3. The Army is issuing two EBRs per infantry squad, while the Marines have placed the EMR at platoon-level.
The Army EBR is fitted with a Leupold 3.510X scope, and the USMCs EMR optic is the Schmidt & Bender M8541 Scout Sniper Day Scope, the same scope used by Marine snipers. Thus equipped, these designated riflemen have the ability to engage enemy personnel to 800 meters.
Each service is now building its own rifles, with Navy Mk. 14 Model 0s being produced at the Crane facility, while Army rifles are assembled at Rock Island Arsenal, Ill., and the USMC version at Marine Corps Base Quantico, Va.
Some 5,000 EBRs have been produced at Rock Island Arsenal, with funding for another 1,200. A further 2,000 Sage stocks have reportedly been sold directly to military units and individuals for conversion of M14s. Still more rifles issued to Marines and SEALs suggest that perhaps 10,000 of these modernized M14s are now in service.
Firing The EBR Thanks to Fulton Armory of Savage, Md., I was able to test fire a platform nearly identical to the EBR. Available to civilian shooters, this semi-automatic-only rifle incorporates Fultons own M14 Receiver, installed on the same Sage Intl chassis stock that David Armstrong designed.
Examining the rifle in my shop, I found that its military two-stage trigger broke cleanly at 3 pounds, 7.5 ouncesabout perfect for me. For test-firing, I mounted a Bushnell Elite 6500 4.530X Tactical Scope, which was a simple task with the rifles Picatinny rails.
Ergonomics had concerned me because of the stocks square edges. Nonetheless, I found its balance and heft surprisingly good with the center-of-balance at the magazine well. Having trained on the M14 in the 1960s, I already appreciated the reliability of its gas piston and operating rod system, and the actions resistance to sand and carbon buildup. Of course, I experienced no stoppages or malfunctions of any kind.
Weighing 14 pounds with a scope, a bipod and a loaded 20-round magazine, this weight plus the straight-line stock resulted in a mild recoil push, making it very comfortable to fire. This also assisted target reacquisition for follow-up shots.
The basic difference between the military EBR and Fulton Armorys version is a National Match barreland that really showed on the range. Accuracy with the Fulton Armory EBR was impressive. Firing off sandbags at 100 yards, my Federal Gold Medal Match, .308 Win., 168-grain ammunition punched a three-round group measuring 0.721 inches. Switching to the U.S. militarys load specifically designed for snipingthe 175-grain, M118 Long Range roundthe rifle fired even better, scoring a 0.50-inch three-round group.
In the hands of a trained marksman, the EBRespecially with a National Match barrelis more than capable of dealing with insurgents to 800 meters and beyond. Perhaps the Taliban and its allies have proven adaptable; but, as demonstrated by these 21st century M14s, so have we.
Humping a 14 pound rifle up a mountain ain’t a picnic. I guess when you need something and have to go to 40 year old stuff in a warehouse somebody isn’t funding the right things. But hey, training for the demise of DADT is well funded I be. What a way to run a war.
Standard military thinking, pick weapon because it is more effective at x range, and then the shorten the damn barrel to decrease the range.
Our guys used to take the M1 carbine when we flew. First thing a newbie did was grab one from one of the White Mice running around. Never jammed, always worked. Not like the Matte Matel specials they issued.
Because they still work.
Do you know what year the B-52 Bomber entered service?
WOW! That don’t look like MY M-14 I humped around with!...............
I was just thinking that if they really are having fights over 500 yds, maybe the old 1903 Springfield in 30-06 might just be a good rifle for maybe half the troops with the rest using something in .308.
Of course a scoped modern bolt action hunting rifle also would seem to make sense for limited use.
Because "New and Improved" isn't necessarily.
How he gets those magazines inserted halfway down the barrel I'll never know.
When Col Jeff Cooper was shown a $3,000 gold plated presentation wall hanging version of the M-16 he replied;
“Why would we want a commemorative version of a rifle we never wanted in the first place?”
It is the same cartridge, you can run a 30/06 in a 308 die and make a 308 after you trim the neck. Same for 270, 243, 25/06, all based on 30/06 brass. Some other wildcats as well.
That M14 looks nothing like the M14 that I first had when I was in Vietnam (thet is, before they took it away from me and gave me that POS M16).
Essentially yes. The M1-A (semi-auto only)is the civilian version of the M-14 and will chamber and digest either ammo marked as 7.65 X 51 or .308 although I am told that the commercial .308 ammo (Win, Rem, Federal, etc. is loaded to higher chamber pressures. I’ve used both kinds and never had a problem.
The M1-A is a sweetheart to shoot. It has probably the best factory trigger I’ve ever shot and the weight and gas operation make recoil very easy to deal with. The only thing I don’t like is the factory scope mount puts the scope up too high to get a good cheek weld. But the thing sure does shoot! I can consistently put rounds in a 12” circle at 400 yards off of a rest. And this is a standard model, not the match grade.
Do realize how old the M-2 .50 cal MG design is? Still the best heavy MG in the world.
Springfield already has a solution, there is little reason to design a completely new weapon.
LOL, older than me.
I LIKE THIS ONE!.......................
Yep. 260 Rem, 280 Rem, 7mm/08 etc.
All the same cartridge head/rim specs. 308 can go into a shorter action.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.