Posted on 10/19/2006 8:15:55 AM PDT by null and void
Oct. 18, 2006 -- Researchers at the Georgia Institute of Technology are mimicking one of Nature's best non-stick surfaces to help create more reliable electric transmission systems, photovoltaic arrays that retain their efficiency, MEMS structures unaffected by water and improved biocompatible surfaces able to prevent cells from adhering to implanted medical devices.
Based on a collaboration of materials scientists and chemical engineers, the research aims to duplicate the self-cleaning surfaces of the lotus plant, which grows in waterways of Asia. Despite growing in muddy conditions, the leaves and flowers remain clean because their surfaces are composed of micron- and nano-scale structures that -- along with a waxy coating -- prevent dirt and water from adhering. Despite their unusual surface properties, the rough surfaces allow photosynthesis to continue in the leaves.
"When rain hits the leaves of the lotus plant, it simply beads up," said C.P. Wong, a Regents Professor in Georgia Tech's School of Materials Science and Engineering, in a prepared statement. "When the leaves are also tilted at a small angle, the beads of water run off instantaneously. While the water is rolling off, it carries away any dirt on the surface."
The plant's ability to repel water and dirt results from an unusual combination of a superhydrophobic (water-repelling) surface and a combination of micron-scale hills and valleys and nanometer-scale waxy bumps that create rough surfaces that don't give water or dirt a chance to adhere.
The researchers have attempted to duplicate the two-tier lotus surface using a variety of materials, including polybutadiene. But that organic compound isn't suitable for coatings that are exposed to sunlight because ultraviolet radiation breaks down its carbon bonds. So to address their first lotus application -- self-cleaning insulators used on high-voltage power lines -- the researchers had to develop another material.
Supported by the National Electric Energy Testing Research and Applications Center (NEETRAC), that project would solve a problem that plagues electric utilities. The build-up of dirt and dust on ceramic or silicone insulators used by high-voltage power lines can eventually create a short circuit that can damage the electric distribution network. It's impractical to manually clean the insulators.
Wong and collaborators Yonghao Xiu, Lingbo Zhu and Dennis Hess have developed a lotus-like surface able to withstand ultraviolet radiation using a combination of silicone, fluorocarbons, and inorganics such as titanium dioxide and silicon dioxide. Their prototype coating has shown excellent durability in long-term testing.
Supported by the National Science Foundation, NASA and other agencies, Georgia Tech is also pursuing other work based on lotus applications:
* Use of carbon nanotube bundles to create the surface bumps needed to prevent dust from accumulating on the surfaces of photovoltaic (PV) cells, space suits and other equipment intended for use on the moon or Mars -- where there's no rain.
* Application of lotus coatings to prevent "stiction," which is the strong adhesive force that can form between the structures of micro-electromechanical systems (MEMS) and substrates. The magnitude of these forces can be enough to deform the structures, resulting in device failure. With its superhydrophobicity and surface roughness, a lotus surface coating can prevent stiction, Wong said.
* Lotus surfaces for use in implantable medical devices to prevent cells from attaching to form blood clots. If successful, this application could replace anti-clotting materials that are coated onto implantable devices such as stents used to hold blood vessels open.
Wow, I can see about a dozen uses for this kind of coating. If transparent, car windshields, coating for car s both for the paint job and for the underside of the car, house siding and windows for buildings.
What about looking at Bill Clinton? None of the s*** he wallows in seems to stick on him.... at least in the MSM.
It probably is transparent, if the surface roughness is less than a wavelenght of visible light.
Not to mention improved waterless urinals. And, if it can be made to adhere to flexible surfaces, good water-repellant fabrics.
Another use (supposing it's cheap): liner coatings for pipelines. If it can't adhere to the sides of the pipe, I think pressure losses due to "pipe drag" might well be reduced.
bump
Hmmmm, ship hulls?
If they can produce a plaid fabric, the'll have the perfect politician's cloth coat.
Sick Willie must wish that Monica's blue dress had had that treatment. ;>)
And some that I forgot..... Laptop, PC, TV and Movie Theater screens
I wonder about the leading edges of aircraft. If water does not attach then I would suspect that there would not be a possibility of ice build up and loss of lift.
That's a good one. If you can cut down on de-icing time, the airlines and airports would be able to save time and money; not to mention the environmental hassles involved with de-icing fluid.
Self cleaning solar cells ping...
It gets worse. This is only one of two arrays and the rebates are going to more than cover the cost of both. <** Standard disclaimer**: I don't approve of the rebates at all but as long as they are out there and finite in number, this is one portion of them that is not going to some tree hugging liberal.
Sure. Rub it in!
;^P
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.