Posted on 05/21/2006 3:35:17 PM PDT by ovrtaxt
"A little over a year ago, the mysterious "Kosol" appeared in the newsgroups with a grandiose plan for antigravity based on what he claims is information from spiritual beings. Many think it's a hoax, but his newsgroup is rapidly becoming an online cultural phenomenon, and rumors are beginning to circulate about European efforts to construct a device called, "The Kosol Sphere"...
http://www.americanantigravity.com/categories/Feature-Articles/
Hmmm....:)
Did you check it? Very much like an extreme Popular Mechanics.
As a younger man I had a passing interest in drag racing when their speeds for the 1/4 mile run was in the 200-225mph range. Since then that interest had disappeared.
Last night, on the radio, I heard two qualifers ran at speeds of 330+mph! Whaaaat??
Can someone tell me what's changed in the past 25 years? Thanks.
I'll belive it when I see it.
I'm immediately suspicious of a person whose title has to be defaulted to "inventor" because they don't have any other credentials.
Nah, then the secret would be out and Congress would pass some new laws of physics that would really screw things up.
What changed? more F, less m --> greater a?
Art Bell was also a cultural phenomenon. He pretty much crashed and burned after the Y2K problem didn't cause world anarchy and economic collapse.
Dang, that looks good!
Rolls eyes.
Sure, lots of people are too cynical to believe it, but there really are good people out there.
There are also con artists and the gullible.
I am a gearhead for sure, but I hope we have a few comments from those that are really technically competent. Looks interesting, but I will wait to see it in a few dozen cars under constant use for a few weeks.
Tell me that's a typo.
A TINY engine with a displacement of 850 CUBIC INCHES?!!!
I looked at the video clips. They leave a lot out. However, if you look at the very first few seconds of the "testing" video, there is a moving cutaway model.
That explains how they implemented the concepts in the
"how it works" clip.
It appears that the "pistons" are a series of "pucks" that are affixed to two separately rotating rings. The combustion chamber is donut-shaped and the pucks roate through the outside ring of the donut. The resulting power shaft goes through the "hole" of the donut. The inside part of the chamber is split in two. Half the pistons are attached at the front half and half are attached at the back. The two assemblies take turns accelerating as the pistons go around the combustion chamber.
It appears there is some mechanism to smoothe out the motion into a continuous rotation, it also likely regulates the movement of the two piston assemblies.
I was a little skeptical, but I have to admit that this engine might actually work. It may not deliver what he promises, but standard piston engines are woefully inefficient. The way this works appears to eliminate a lot of the wasted motion (and thus power).
Couple areas of concern - not sure how you would seal the combustion chamber when there are three pieces rotating against each other - I suppose it could be done with rings like pistons have.
Secondly, machining that donut combustion chamber looks complicated. Not undoable, just not something the average engine machine shop is going to be able to do easily.
Running biodiesel would likely be good for lubricating all the piston assemblies. I don't see any way to lubricate any of that without injecting oil into the combustion chamber.
Interesting. I sure wish the guy well. It certainly looks like there is some serious engineering involved in it.
"If it sounds too good to be true, it usually is".
Yeh, but with all the money he made that 60 + year-old managed to snag a 20-something filipino wife and move to the Philippines leaving other far-out tinfoil-hat kooks (like George Noury) to fill in for him.
"Power-to-weight ratio of 40 to 1? (units? apples to oranges?)
Hmmmm.
Must be a math system based on different principles.
These things come along every once in a while. Let's see some dynamometer results then we decide.
I recommend you sell your house, borrow as much as you can, and invest heavily.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.