FReeper Canteen ~ Part VI of The Mongols ~ December 14, 2004

www.coldsiberia.org ^ | December 14, 2004 | LaDivaLoca

[LaDivaLoca]

For the freedom you enjoyed yesterday...
Thank the Veterans who served in
The United States Armed Forces.

Looking forward to tomorrow's freedom?
Support The United States Armed Forces Today!

ANCIENT WARFARE





Part VI of The Mongols

cont'd Mongolian Bow: Fish Glue and Sinew

As we understand, a composite bow by definition has several layers. We have mentioned the birch frame, and the layer of horn/bone. In addition to this, there is a layer of specially prepared birch bark whose purpose is to protect against penetration of moisture. In addition to this is a layer of sinew, which is taken from deer, moose or other game animals. The tendons of domestic animals may also be used, but Mongols feel that tendons from wild animals like deer, moose and mountain sheep are the strongest and best. Naturally, the bow has to be glued together. The preferred and traditional substance used for the impregnation of both leather as well as their bows is fish glue. As a matter of fact, fish glue has been proven through millennia to be highly capable of resisting moisture. Moreover, it is durable and lasts longer than modern epoxy resins, which are prone to molecular fatigue. Above all, fish glue is available in all the waters of Siberia where fish is living, among them the greatest of them all, Lake Bajkal.

How is fish glue made? The process that yields the highest quality is to take swim bladders from freshwater fish, soak them into hot water to extract the protein substance, and then boil the resultant soup for a prolonged period. If sufficient quantities of swim bladders cannot be obtained, it is also possible to make hide glue by boiling animal skins. This latter method however results in a glue of inferior quality, because it absorbs moisture, whereas glue made from ichthyic air bladders is highly moisture-resistant.

Although all materials needed to build the Mongolian bow are to be found in the immediate natural environment, the whole production process is very complex. It takes a long time to build a bow that is to meet the Old Mongol requirements. We may also assume that the selection of the best wood material for the frame requires knowledge and experience.

The usual procedure in the production of a traditional Mongolian bow is as follows: The wooden frame is cured, and the horns and/or bone to be used are boiled for softness. This makes it possible to fit the different parts together with great precision. As we understand, high-quality Mongolian bowmaking is certainly a most impressive craftsmanship. When the wooden frame, and the horns/bone parts are ready, the sinewing can take place. First the tendons have to be dried. After that, they are crushed until they form a mass of loose fibers. Next, this mass is mixed with fish glue to form a solid but not rigid layer. It is important to apply the correct thickness and amount of sinew, and it is done in a two-stage process with some days in between. Too little makes the bow weaker, too much would make it stiff. When completed the layer of sinew could be as thick as a human finger before drying. Sinew has a peculiar quality: Unlike other materials, its strength increases when subject to stretching or impact. This form of elasticity is a property stemming from the molecular structure of the protein of tendons (collagen), and can be seen as another striking demonstration of the innate superiority of natural solutions and materials. When used in a Mongolian composite bow, the effect is that as the horn plates in the front snap back to their former shape, the sinew layer in front contracts in the same split-second, adding further acceleration to the shot.

At each stage, fish glue has been applied to secure all the parts. In the horns and wooden parts, the sides that are to be glued against each other are first grafted with a toothed special tool in order to give the strongest possible hold.

The last step is usually the applying of the protective birch bark layers, which are also boiled until soft, so ensuring a proper fit before glued to the finished bow. When the layer of birch bark has been added to the composite construction, the whole bow is wrapped tightly in ropes and placed in a form where it is allowed to dry and harden in room temperature for one year or more. This ensures that the bow becomes extremely strong and that it keeps its shape and snappiness even after many years of frequent shooting.

A Mongolian bow is stored in its own leather case, protecting the bow when not in use.

The String

No bow, no matter how powerful, can be shot without a string. Traditional Mongol bowstrings are made from animal hide. First every trace of fat is removed. Thereafter the hide is stretched and twisted. After this treatment it will not stretch, but remain taut. Although the skin of many fur-bearing animals can be used, horse skin is often preferred since it is said that this material maintains suppleness in the exceedingly low winter temperatures of Siberia and Inner Asia. It is also possible to use the intestines of animals as string material, but such strings are not water resistant and thus only suited for use in dry and hot weather.

Silk and cotton, and mixes of these, can also be used. Modern archers generally use dacron and other man-made materials that require high technology to produce and therefore cannot possibly be made by the archer himself. Here we see another example that the use of primitive materials, although demanding in terms of individual skills and work, is the more reliable and sustainable strategy when viewed in a wider perspective.

When the bow is strung, the archer may sit down, using both feet to press against the bow as the limbs were bent while the string was attached. Using another technique, he or she could also stand upright, bow bent under one leg while the other leg holds the outer end. On horseback, the Mongol archer routinely stringed the bow by placing one end of the bow between the foot and the stirrup while the arms pressed against the bow.

Source: http://www.coldsiberia.org/monbow.htm

Next Tuesday Part VII of The Mongols

[StarCMC]

He had a polypectomy at 4. We won't go into how we knew he needed one... ugh!!

[StarCMC]

Hmmmmm... so who has more character in the Blackie household?? You or Ms. Blackie??

[blackie]

Ask Star* ~ she is the worlds foremost authority on laundry attacks! :):)

[Lady Jag]

Mojo, you really know how to show off! Did you make or enhanced that one?

[StarCMC]

>OMG - I googled laundry and found THIS! Go check it out!!! ROFLMAO!!

[blackie]

Wow ~ mine is just for a check up, I have no gastrointestinal problems ~ my intake and exhaust have always functioned extremely well. :):)

[StarCMC]

450??

[StarCMC]

450??

[StarCMC]

450??

[StarCMC]

450??

[StarCMC]

450??

[Soaring Feather]

An email gem.


God's Wings
A little something to put things in perspective...

An article in National Geographic several years ago
provided an interesting picture of God's wings. After
a forest fire in Yellowstone National Park, forest
rangers began their trek up a mountain to assess the
inferno's damage.

One ranger found a bird literally petrified in ashes,
perched statuesquely on the ground at the base of a
tree. Somewhat sickened by the eerie sight, he
knocked over the bird with a stick.

When he gently struck it, three tiny chicks scurried
from under their dead mother's wings.

The loving mother, keenly aware of impending
disaster, had carried her offspring to the base of the
tree and had gathered them under her wings, instinct-
tively knowing that the toxic smoke would rise. She
could have flown to safety but had refused to abandon
her babies. Then the blaze had arrived and the heat
had scorched her small body. The mother had remained
steadfast. She had been willing to die, so those under the
cover of her wings would live.

"He will cover you with his feathers, and under his wings
you will find refuge." (Psalm 91:4)

Being loved this much should make a difference in your
life. Remember the One who loves you, and then be
different because of it.

Please pass this on to people
you want to be blessed. Please read on.

To realize the value of a sister
Ask someone who doesn't have one.

To realize the value of ten years:
ask a newly divorced couple

To realize the value of four years:
Ask a graduate.

To realize the value of one year:
Ask a student who has failed a final exam.

To realize the value of one month:
Ask a mother who has given birth to a premature baby.

To realize the value of one week:
Ask an editor of a weekly newspaper.

To realize the value of one hour:
Ask the lovers who are waiting to meet.

To realize the value of one minute:
Ask a person who has missed the train, bus or plane.

To realize the value of one-second:
Ask a person who has survived an accident.

To realize the value of one millisecond:
Ask the person who has won a silver medal in the Olympics.

Time waits for no one. Treasure every moment you have. You
will treasure it even more when you can share it with someone
special.

To realize the value of a friend:
Lose one.

[blackie]

Hummmmmmmmmmm ~ I do the cooking and Barb does the cleaning, etc, which includes attacking the laundry. :)

[Soaring Feather]

Hiya, reagan!!

[HiJinx]

Chicken and Stars soup, along with some zesty saltines. Yummy. 'Course, mine didn't quite look like this after I finished adding extras from the 'fridge...peas, rice, and carrots, and a little green Tabasco sauce...

[Lady Jag]

OhSama!

[reaganaut]

Hiya, Ms. Feather. Sorry, I stepped out and onto another thread. Looks like a Dem member of the Electoral College in MN voted for Edwards instead of Kerry.

http://www.freerepublic.com/focus/f-news/1301215/posts

[reaganaut]

Thanks for the soup. I haven't had chix and stars in years. Nummy!

[Fawnn]

ALL cats and kitties doing well and happy.

Considering the reasons why you've been taking them to the vet, are you sure they're happy? ;)

[Fawnn]

I see it, too. ;)

(Surprised I'm even here looking? ... shhhhhhhh don't tell anyone I'm here. I'm going back to MaMode to catch up.)

. . .