Posted on 03/29/2016 1:41:46 PM PDT by tumblindice
Perfect. You’re a gentleman and a scholar! Thanks.
Yeah, I’m back from dinner and red-lining.
Paragraphs!
That being said: the only maintenance I do in spring, is put gas in it and go.
I prep it at the end of season in the fall.
I do it all again too sometime in August. FYI, if your grass has white tips, it’s a sign your blade is dull.
Nice to talk about something other than bitter political stuhrm und drang, ain’t it?
Blade are best when they’re sharp. Dull blades: Bad.
This lawn-boy was about a 1982 self propelled. It had been my dad’s and he probably frowned from heaven when I got rid of it. I had mine from about 78 or just before the brake/clutch blade guard requirement went into effect. I had both broken back in 2011 and only wanted to repair one so I had dad’s repaired but it did not hold up.
My old 78 was about worn out but it was not self propelled. I got a good thirty years out of it. First fifteen was mowing a third of an acre every time.
The tiller is just a small craftsman, but it works well for a small garden. Arizona soils don’t lend themselves to gardens unless you want to flood irrigate about every thirty-six hours.
Great content & writing! I’ll be your editor anytime.
A late model Stihl chainsaw trick I learned the hard way: I bought a new Stihl chainsaw a couple of years ago that has a 3-way “Stop/Run/Choke” lever and I had a heck of a time getting it to start...found out the hard way to just put it in “choke” for 1 or 2 pulls (engine will just barely try to catch) and then put in in “run” and pull and it will take right off.
One pull too many in “choke” will flood it every time!!
I was used to other 2-strokes and staying in choke until the engine started and then switching quickly to “run”...this isn’t a good strategy with a newer Stihl 2-stroke.
(Also, California “crap-gas” blends don’t help!)
Well, today I managed to get it started after about 20 minutes of trying. Then as I was almost ready to drive it out of the garage, I heard a large SNAP!!! coming from the engine department. Then the thing wouldn't start. Something is broken.
Now since it's old and we've already had it repaired two or three times, should we fix it as it will be real difficult to sell a broken mower? But the repair will probably cost several hundred dollars.
We had already bought a new riding mower, and were going to sell the old one. But now we don't know whether to get it repaired or just junked...if the latter is possible.
If you've got a mower with one of those little vacuum-operated fuel pumps on it that dries out and loses prime over the winter, you can get the mower started with a propane torch. Unscrew the tip and pull that little "pill" out of the stem and set it aside. Open the valve up all the way, stick it down the carb throat and turn it over. It'll start right up and run on the propane until the fuel pump gets the carb filled back up.
Thanks
I have donated lawnmowers, when replacing over the years, to the high school. They use for shop class, and they also offer a mower tune-up/blade sharpening service each spring.
We used to have a guy who would come to the house. He had a big van, like the UPS trucks. “The Engine Doctor” was his business name. And he would come and to the minor mower service each year, for a great price. But, alas... he died. Seems like it would be a lucrative business for someone with the right skills. He would work on mowers, snow blowers, all of the yard care machines.
Put it out on the curb with a “best offer” sign on it, and if no one bites, change the sign to “Free” after a few days.
“My riding mower will not start. I have a new battery and a new solenoid. What should i ceck next? Its a troybilt with b & Stratton engine. When i turn the key, nothing happens. I suspect something electrical. I have a volt meter/tester(?) if that would help.”
No crank is pretty simple. If there’s no click from the solenoid it means the battery power is not getting thru to the solenoid to trip the circuit open to the starter. You’ve replaced the battery and solenoid already so the fault is likely in the other end of the circuit, the solenoid grounding. There should be a white ground wire on the solenoid. Make sure that has a good path to ground.
Most times a bad ground can be fixed by tracing and re-seating the far end connection to restore grounding. It may even be at the Neg. battery terminal.
Our guy was “Vinny’s Mower Service,” located in a falling-down building (always “For Sale”) up at the next stop light. He was there for at least ten years and always had all the business he could handle, even had to hire help.
I envy your ability to get ethanol free gas. It’s a 60-70 mile drive for me.
Sir! That is *not* “Q”. That is “grilling out.” A worthwhile endeavor, to be sure, but not Q.
Q involves low and slow, often with pork, but sometimes with beef (especially brisket or ribs) or chicken.
Thus ends the lesson.
I’ve been servicing my lawn mowers for over 30 years, including changing out blades and never once did I bother to remove the spark plug cable. Except when I’m actually replacing the spark plug.
A good link but keep an eye out. Some not on the list erect banners all the time stating that they are etholnal free.
Most boaters will know here to get it.
I meant most boaters will know where to get it.
BTW do not use any type of air on an accordion filter unless it’s on a dryer. Only tap it out. Even the normal humidity in the air can shorten it’s life. Same with vacuuming it.
Just a follow up to my riding mower issue. By jumping the large posts on top of the solenoid, it cranked and I was able to start the mower.
It looks like the circuit is incomplete. I’ll check all the connections. Thanks to you all for the helpful tips.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.