Free Republic
Browse · Search
General/Chat
Topics · Post Article

Skip to comments.

New Ford GT will race at Le Mans with Chip Ganassi in 2016
Autoweek ^ | 18 December, 2015 | MAC MORRISON

Posted on 01/02/2016 7:32:57 PM PST by MtnClimber

The rumors, the buzz? Confirmed. Ford will unveil a GT-successor at January's North American International Auto Show in Detroit, as anticipated.

Sources close to the program have confirmed to Autoweek that the car -- whether or not it is actually named "GT" in production guise, which it very well might not be -- will undertake a full, factory-backed racing effort in 2016. Specifically, a full-season, two-car effort in the Tudor United SportsCar Championship and, most significantly, the 2016 24 Hours of Le Mans.

The two-car assault will be campaigned by IndyCar -- and Tudor Series -- stalwart, and full-time NASCAR entrant, Chip Ganassi Racing when the United SportsCar Championship opens 2016 with the Rolex 24 at Daytona. Ganassi is presently Ford's lone Prototype-class representative in United SportsCar (following Michael Shank Racing's recent switch to Honda for 2015), where it campaigns a Riley-Ford EcoBoost Daytona Prototype. The team switched from BMW to turbocharged-V6 Ford EcoBoost power for the recently completed 2014 season, winning the 12 Hours of Sebring, as well as on the streets of Long Beach, Calif., and at Circuit of the Americas in Texas, on its way to finishing fourth in the championship.


TOPICS: Sports
KEYWORDS: automotive; autoracing
Navigation: use the links below to view more comments.
first previous 1-2021-4041-48 next last
To: yarddog

IIRC, the Mk I GT40s had the 289. All of the homologation copies were probably sold out of that series, before the MkII series with the 427 was phased in. I think a number of the original MkI cars were refitted with MkII engines and transaxles.


21 posted on 01/02/2016 8:42:32 PM PST by Charles Martel (Endeavor to persevere...)
[ Post Reply | Private Reply | To 9 | View Replies]

To: Paladin2

Yea, I understand V8 engines and never understood odd multiples of the four IC cycles (Intake, Compression, Combustion, Exhaust). A V4 has one cylinder in combustion for every engine rotatopn. A V8 has two cylinder combustion cycles per rotation allowing for opposite sides of the V8 to fire at the same time to offset vibration.


22 posted on 01/02/2016 8:42:32 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 15 | View Replies]

To: truth_seeker

They could probably do the same with a four-banger, but V-8s are still the sweet spot.


23 posted on 01/02/2016 8:43:26 PM PST by Paladin2
[ Post Reply | Private Reply | To 19 | View Replies]

To: MtnClimber

“In a 24-hour race the reliability is also important and really high revving engines often don’t last.”

Yes, that can be an issue at Le Mans. The new Ford GT will use their Eco Boost V6 engine, which will have to turn some serious rpms, as will the Porsche, Ferrari, and some others, while the big GM factory Corvettes will soldier on with big V8 power and a bit lower rpms.


24 posted on 01/02/2016 8:43:34 PM PST by mtrott
[ Post Reply | Private Reply | To 17 | View Replies]

To: MtnClimber

Cobsider the instantaneous torque at the flywheel as a function of crankshaft angle.


25 posted on 01/02/2016 8:47:03 PM PST by Paladin2
[ Post Reply | Private Reply | To 22 | View Replies]

To: mtrott

“Yes, and my buddy, Joey Hand, will be piloting one of the Ford GTs. Ford is “all in” on the move from the Prototype class to the GTLM class and badly want to win Le Mans on the 50th anniversary of their last win, with the Ford GT40 in 1966.”

Man, 50 years already.


26 posted on 01/02/2016 8:49:33 PM PST by headstamp 2
[ Post Reply | Private Reply | To 18 | View Replies]

To: Paladin2

I also live in the mountains at 8,500 ft elevation. My current fast car is a 2013 Audi S6. The 2012 S6 used a detuned version of the Lamborghini V10 engine. My 2013 has a 4.0L V8 twin turbo. It has less peak HP than the V10, but reaches near max torque at 1600 RPM and is much faster. Car and Driver tested it at 0-60 in 3.7 seconds and the turbos make it work at high altitude too.


27 posted on 01/02/2016 8:55:32 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 20 | View Replies]

To: Paladin2

I know flat plane crank shafts are the current hot thing. I have not studied the subject enough to understand why that is better than a 90 degree crank in a V8 engine. In a non-multiple of 4, I don’t understand enough about torque, vibration, etc.


28 posted on 01/02/2016 9:03:11 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 25 | View Replies]

To: Paladin2

“They could probably do the same with a four-banger, but V-8s are still the sweet spot.”

Correcting earlier post, they have won with 6,8,10 and 12 cylinder versions; al turbo, some gasoline, later diesel and then diesel-electric hybrid.

Their most common strategy was not fastest pure speed, but most reliable and better fuel economy-giving fewer stops for fueling.

I believe they won something like 12 of 14 years. They were defeated last year by cousin Porsche, which is probably derived from an internal strategy to push Porsche to the front for racing. But Audi’s run is significant historically.


29 posted on 01/02/2016 9:05:36 PM PST by truth_seeker
[ Post Reply | Private Reply | To 23 | View Replies]

To: mtrott

Yes, the Corvettes have ruled in the endurance races for quite a while. At Daytona, Sebring and Le Mans. With the rough track surface, the 12-hours of Sebring may be the toughest. I have been to Sebring and Daytona for probably 20 times each. I worked on a Porsche 911 electronics package for one year. I would have been in the pits, but I was away on a mountain climbing trip in the Andes when the Daytona 24 was run that year. That 911 was run off the road and was totalled in the Pedro Rodriguez corner.


30 posted on 01/02/2016 9:11:34 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 24 | View Replies]

To: Paladin2
IC engines are basically air pumps.

OUTSTANDING! you are are only on i have ever seen that put that forth other than myself on occasion.

the way i was taught was displacement/2*RPM/144 gave you the amount of air an engine ingested and that determined the size of carb in CFM you needed to produce HP.

superchargers and turbos not withstanding

31 posted on 01/02/2016 9:14:56 PM PST by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -w- NO Pity for the LAZY - Luke, 22:36)
[ Post Reply | Private Reply | To 15 | View Replies]

To: MtnClimber
gonna be an interesting year for GT... 8^)
32 posted on 01/02/2016 9:16:13 PM PST by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -w- NO Pity for the LAZY - Luke, 22:36)
[ Post Reply | Private Reply | To 2 | View Replies]

To: Chode

Now, mass air flow sensors tell the computer all it needs to know to inject the right amount of fuel.


33 posted on 01/02/2016 9:34:42 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 31 | View Replies]

To: Chode
Photos of the new race car:

https://www.google.com/search?q=ford+gt+race+car+2016&espv=2&biw=1366&bih=635&tbm=isch&imgil=uOO-HoshnroSZM%253A%253BjJflVhtmrxHctM%253Bhttps%25253A%25252F%25252Fwww.youtube.com%25252Fwatch%25253Fv%2525253DqPfW644Zy-s&source=iu&pf=m&fir=uOO-HoshnroSZM%253A%252CjJflVhtmrxHctM%252C_&usg=__iWwTplB02GkR-XUNYbCgD40Sn_g%3D&ved=0ahUKEwjho6OU94zKAhVX32MKHY63AW0QyjcIMg&ei=Y7SIVqHmNNe-jwOO74boBg#imgrc=uOO-HoshnroSZM%3A&usg=__iWwTplB02GkR-XUNYbCgD40Sn_g%3D

34 posted on 01/02/2016 9:40:44 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 32 | View Replies]

To: mtrott

A Corvette won outright at the Daytona 24 in 2001! Beating even the prototypes.


35 posted on 01/02/2016 10:00:40 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 24 | View Replies]

To: yarddog
On digging back, I found references where Ford was thinking of using the new 244 cu in. DOHC V8 developed for Indy, but decided otherwise, luckily. Oval track racing and road racing demand quite different things from an engine over time, I suspect.


36 posted on 01/02/2016 10:02:02 PM PST by doorgunner69
[ Post Reply | Private Reply | To 9 | View Replies]

To: Chode
Of course, a nasty thing known as volumetric efficiency screws up that theoretical calculation. Never come close, though I gather some finely tuned intake/head/exhaust designs come near 100% and may exceed it, at least over small RPM ranges.

I would love to know what current MotoGP bikes are achieving, though their numbers are guarded as close as nuclear bomb designs. Well over 200 hp from 60 cu. inches! And manageable power bands.

37 posted on 01/02/2016 10:10:27 PM PST by doorgunner69
[ Post Reply | Private Reply | To 31 | View Replies]

To: doorgunner69
A youtube video by Ford on the GT. Looks like they are gunning for Ferrari again.

https://www.youtube.com/watch?v=7VXYKnkGRPA

38 posted on 01/02/2016 10:12:01 PM PST by MtnClimber (For photos of Colorado scenery and wildlife, click on my screen name for my FR home page.)
[ Post Reply | Private Reply | To 36 | View Replies]

To: yarddog
I have never understood torque. I know it means “twisting force” but isn’t that what horsepower is too?

Torque is basically how hard the rotational push is. If you're physically pushing to stop a vehicle, at the same speed/weight, a truck with lots of torque would be harder for you to slow/stop then a car with less torque. It's kinda the size of the push behind the twist, Usually measured in Newton-meters.

And horsepower is simply a measure of power (rate of work). So HP is essentially torque times speed of rotation.
39 posted on 01/02/2016 10:22:40 PM PST by Svartalfiar
[ Post Reply | Private Reply | To 13 | View Replies]

To: MtnClimber
100%, but the diameter of the throttle body intake has to match what the motor/air pump can ingest, right?

so the formula still holds true, yes?? or is it only a problem if the orifice is smaller than what the engine can ingest therefore limiting what the MAFS tell the injectors what is required and can produce???

40 posted on 01/02/2016 10:23:39 PM PST by Chode (Stand UP and Be Counted, or line up and be numbered - *DTOM* -w- NO Pity for the LAZY - Luke, 22:36)
[ Post Reply | Private Reply | To 33 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-48 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
General/Chat
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson