[gundog]

If ya go this route, check with the boys at AR-15.net. They say the uppers are good, but don’t get their bolts. Find one elsewhere.

[omega4179]

You need a bench with a vise, the armorers wrench, and I recommend the upper receiver block to clamp it safely for barrelling.
Model 1 is OK, just OK. I had to remove their hammer and trigger and discard after some safety issue came up.
you can save $300 min to $500 by building yourself. Sears has the punches you need to build, get 2 1/16 and 2 1/8 punches and a tiny mallet to tap them with.
I would recommend doing business with del-ton over model 1 really, quality is safety and safety is life or death.

[Skooz]

I bought an AR-15 back in 1984. Excellent rifle. Sorry I sold it.

[NYTexan]

bump and a ping

[xraykat]

interested in purchasing an olympic AR 15 i will also looking at the bushmaster who i was told were made by S and W any advice THANKS