ASUS L1N64-SLI WS to Be the First AMD 4×4 Motherboard
Direct link:
AMD 4x4 Motherboard Details Unveiled
******************see link for pictures**************************
DailyTech has obtained a couple of images of an upcoming motherboard for AMD’s 4x4 enthusiast platform. The motherboard is an ASUS L1N64-SLI WS powered by two NVIDIA nForce 680a MCPs. Two socket-1207 processors are supported with four memory slots—two slots per processor. With two nForce 680a MCPs the ASUS L1N64-SLI WS features 12 SATA 3.0 Gbps ports and one PATA for storage connectivity. There’s also an additional e.SATA port on the back I/O as well.
As far as PCI Exress goes the L1N64-SLI WS features a grand total of four PCI Express x16 slots for plenty of SLI and SLI physics processing power. Due to space limitations the L1N64-SLI WS only has one PCI and PCIe x1 slots.
Networking features of the ASUS L1N64-SLI WS include dual Gigabit Ethernet ports. The onboard Gigabit Ethernet features NVIDIA’s FirstPacket, DualNet, Teaming and TCP/IP offload technologies. Audio is powered by a high definition audio codec with optical and coaxial S/PDIF outputs. It is unknown which codec ASUS has equipped the L1N64-SLI WS with, though it could be Analog Devices or Realtek. The board is not legacy free and still has PS/2 and parallel ports.
Due to the complex design of AMD’s 4x4 platform, the ASUS L1N64-SLI WS uses an eATX form factor which will not fit in smaller cases. Since dual processors require a little extra power, ASUS has equipped the L1N64-SLI WS with an 8-pin EPS12v and Molex power connectors.
U.S. distributors claim the ASUS L1N64-SLI WS will have an MSRP of $480 without bundles, but the street price will probably be much less.
Expect AMD’s 4x4 enthusiast platform to arrive later this month with three Athlon FX processors—FX-70, FX-72 and FX-74. It is unknown if the ASUS L1N64-SLI WS will be compatible upcoming AMD Stars processors.
AMD Beyond "Brisbane"
Anh Huynh (Blog) - November 14, 2006 6:31 PM
*************************************
Quad-core, HyperTransport 3.0 and more
AMD is expected to release its 65nm products soon. Moving beyond the 65nm Brisbane die shrink and Windsor FX, AMD has a couple of other tricks up its sleeves. AMD plans to transition from its Cities core products to new Stars cores. This transition uses AMD’s new core naming scheme. While AMD has typically named its processor cores after cities, the new naming scheme uses star names.
The Stars family includes the upcoming Agena FX, Agena, Kuma, Rana and Spica cores. AMD will be introducing plenty of architectural changes with the upcoming Stars family. Stars family processors will switch over to AMD’s previously announced HyperTransport 3.0 architecture. Previously, Star processors have been referred to as Revision H or K8L. While Stars family processors use the HyperTransport 3.0 protocol, it will be backwards compatible with HyperTransport 1.0 systems.
HyperTransport 3.0 is expected to provide twice the amount of bandwidth between the processor and chipset. It will also allow the processor and internal north bridge to operate at different frequencies as well. With HyperTransport 3.0, the north bridge can operate at 75% of the maximum clock frequency of the processor. AMD roadmaps claim the greater bandwidth of HyperTransport 3.0 is important for PCIe 2.0 and upcoming multi-GPU, integrated graphics and multiprocessor performance.
In addition to HyperTransport 3.0, Stars family processors feature a 128-bit floating point unit for each CPU core, DDR2-1066 support, SSE4A instructions and a split power plane. Split power planes allow the processor and internal north bridge to operate at different voltages and speeds. The advantages of split power planes are it allows the north bridge speed and voltage to never change during Cool’n’Quiet power saving measures. With split power planes the Stars processors require separate PLLs for the processor and internal north bridge.
Stars family processors will use socket AM2+, with the exception of the Agena FX. Nevertheless, Stars family processors will be backwards compatible on socket AM2 motherboards, though performance is sacrificed by falling back to HyperTransport 1.0. AMD’s socket AM2+ is not the expected socket AM3 though.
Beginning in Q3’2007 AMD is expected to release its first Stars quad-core processors. The new quad-core processors are based on AMD’s Agena and Agena FX cores. Targeting AMD’s 4x4 platform is the Agena FX core. Agena FX will only be available on Socket 1207+ and offer dual processor functionality. The vanilla Agena core will be available on single processor socket AM2+ platforms.
Agena FX and Agena based processors offer identical features. New to the Agena FX and Agena cores is a shared L3 cache. 2MB of L3 cache will be shared between all four processor cores. The L2 cache will be 2MB as well. Clock frequencies of 2.7 GHz to 2.9 GHz are initially expected. The HyperTransport 3.0 frequency for Agena FX and Agena cores is expected to be clocked at 4000 MHz. Agena FX and Agena core processors will be manufacturing using a 65nm process and carry 125W TDPs. The first Agena FX and Agena based processors are expected to arrive in Q3’2007.
AMD will be releasing new Kuma core dual-core processors in Q3’07 as well. The new Kuma core processors feature HyperTransport 3.0 clocked at 4000 MHz, 1MB of L2 cache and 2MB of shared L3 cache. Kuma processors are expected to arrive in 2.0 GHz to 2.9 GHz frequencies for socket AM2+. TDP for Kuma core processors is expected at 89W and 65W.
Single-core products won’t be left out of the Stars family either. AMD will release single-core Rana and Spica cores towards the end of 2007. Rana core processors will be replacing Orleans and Lima Athlon 64 single-core processors while Spica will be replacing single-core Venice Athlon 64 and Manilla Sempron processors. AMD’s roadmap doesn’t reveal too much on Rana and Spica. Nevertheless, Rana and Spica will feature HyperTransport 3.0 and socket AM2+ compatibility.