Free Republic
Browse · Search
Smoky Backroom
Topics · Post Article

Skip to comments.

Another Cold Fusion Device Attracts Commercial Interest
Oil Price.com ^ | Thu, 19 September 2013 22:40 | Brian Westenhaus

Posted on 11/12/2013 9:20:52 PM PST by Kevmo

Brillouin Energy has entered into its first international licensing agreement covering three nations. The firm is involved in on-going negotiations for other potential international partners. This makes the second Cold Fusion or Low Energy Nuclear Reaction (LENR) Lattice Assisted Nuclear Reaction (LANR) and Brillouin’s Controlled Electron Capture Reaction (CECR) idea to attract commercial interest.

.... Brillouin’s CECR starts by introducing hydrogen into a suitable piece of nickel (or other metal with the correct internal geometry). A proprietary electronic pulse generator then creates stress points in the metal where the applied energy is focused into very small spaces. This concentrated energy allows some of the protons in the hydrogen to capture an electron, and thus become a neutron. This step converts a small amount of energy into mass in the neutron.

.... Brillouin’s power equation is 2.4 units of energy going in and 24 units coming out.

The Brillouin CECR is thought to be quite versatile. The released energy is initially absorbed by the metal element, and then made available as heat. At lower temperatures, this generated heat can be used directly for space heating, hot water and similar applications. Further refinements of the Brillouin Energy system will produce the higher temperatures needed for electrical generation, dry industrial stream and industrial processes. ......

Big investment money is lining up. Brillouin has raised about $3 million in funding. A “second stage” $20M investment conditional agreement from Sunrise Securities of New York for $20 million is now in place.

The Sunrise deal offers to purchase 15% of Brillouin post-money, conditional on Brillouin moving ahead with and completing successful testing of its CECR at SRI.

....

The $20M Sunrise offer would fund full commercial launch of this merchant power supply retrofit business model after successful testing of the CECR called NHB™ at SRI.

(Excerpt) Read more at oilprice.com ...


TOPICS: Heated Discussion
KEYWORDS: canr; cmns; coldfusion; lenr
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-66 next last
To: Truthoverpower

So there’s your cold water in the face, charlatans and their gullible believers in the pie in the sky and free energy and let’s ignore the second law of thermodynamics
***Who says the 2nd law is being ignored? Have you read up on the Widom-Larson theory? How about KP Sinha’s theory? Or is it that you don’t trust PhD Nuclear Physicists?

For those in rio Linda that is energy cannot be created or destroyed. Only changed from one form to another
***Wow, that just blows my hair back the way you explained it... /s

Mark my words Freepers
***I am marking your words, noting how poor those words have been written down, and how poorly you defend your thoughts.


41 posted on 11/13/2013 3:46:44 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 27 | View Replies]

To: aquila48

Excellent point.

For instance, I see all kinds of threads on catholic beliefs that I consider to be a waste of time... so ... I don’t click on them.


42 posted on 11/13/2013 4:14:53 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 7 | View Replies]

To: PapaBear3625

propose that, in condensed matter, local breakdown of the Born-Oppenheimer approximation occurs in homogeneous, many-body, collectively oscillating patches of protons, deuterons, or tritons found on surfaces of fully loaded metallic hydrides
***Their proposal is as good as anyone else’s, maybe. Something breaks down locally inside metallic hydrides. If it’s the Heisenberg Uncertainty Principle, then KP Sinha wins the Nobel. I think that there’s a lot of evidence of Bose-Einstein Condensates being formed (Y.E. Kim would get the Nobel prize), but the temperatures are way too high for BEC formation. So my proposal is that instead of a 3D BEC forming, it’s a 2D or 1D BEC, forming along only one axis rather than 3.


43 posted on 11/13/2013 4:50:07 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 31 | View Replies]

To: Kevmo

No sir I have a JOB or two actually. Not all day to try and SOUND smart

Capisce?

Believe in the tooth fairy all ya want

I’m sticking with REAL world engineering

Thanks for your input and one day i send ya one of MY white papers or 50 page analyses

Geezh!


44 posted on 11/13/2013 8:34:07 PM PST by Truthoverpower (The guvmint you get is the guvmint you deserve)
[ Post Reply | Private Reply | To 36 | View Replies]

To: Wonder Warthog
Yes, but that fits into the category of a high-energy process, and thus is well-accepted by the hot physics folks.

That also fits into the category of high priced technology, and thus is well accepted by the crony capitalist folks....................

45 posted on 11/14/2013 6:46:04 AM PST by Red Badger (Proud member of the Zeta Omicron Tau Fraternity since 2004...................)
[ Post Reply | Private Reply | To 35 | View Replies]

To: Red Badger
"That also fits into the category of high priced technology, and thus is well accepted by the crony capitalist folks...................."

True dat! (Cajun expression)

46 posted on 11/14/2013 11:59:09 AM PST by Wonder Warthog
[ Post Reply | Private Reply | To 45 | View Replies]

To: Truthoverpower
"I’m sticking with REAL world engineering."

Good idea. Since you want to do that, I suggest you obtain a copy of George Beaudette's book "Excess Heat, Why Cold Fusion Research Prevailed".

His biography:

Charles Beaudette was born in Boston in 1930. He attended Massachusetts Institute of Technology in Cambridge, Mass., where he majored in electrical engineering and held the position of managing editor of The Tech, the official student newspaper. He was awarded the degree of Bachelor of Science in electrical engineering in 1952. In 1958 he started Dychro Corporation and sold it to a computer company in 1961. From 1963 to 1973 he was employed by EG&G Corporation in Wellesley, Massachusetts, in the capacity of senior engineer and engineering manager. It was during this time that he participated in the technology development for what eventually became the office facsimile, and which work included development of what is now the PC modem. From this activity, Mr. Beaudette was issued a patent on image processing for variable speed page scanning and transmission.

After retirement, he attended an ICCF (International Conference on Cold Fusion) symposium on a whim, and found there, not the fraud and fakery he expected, but serious science and research.

The book is the result of his research into the reality of cold fusion.

He covers the experimental evidence quite well (though now a bit dated, as the book was written in 2002), as well as the "sociological factors" that led the physicists (NOT Pons and Fleischmann)to "get it wrong".

47 posted on 11/14/2013 12:09:25 PM PST by Wonder Warthog
[ Post Reply | Private Reply | To 44 | View Replies]

To: Kevmo
Something breaks down locally inside metallic hydrides. If it’s the Heisenberg Uncertainty Principle, then KP Sinha wins the Nobel. I think that there’s a lot of evidence of Bose-Einstein Condensates being formed (Y.E. Kim would get the Nobel prize), but the temperatures are way too high for BEC formation. So my proposal is that instead of a 3D BEC forming, it’s a 2D or 1D BEC, forming along only one axis rather than 3.

I think it just takes the appropriate kind of pixie dust sprinkled on the electrodes.
48 posted on 11/14/2013 12:32:57 PM PST by ZX12R (Never forget the heroes of Benghazi, who were abandoned to their deaths by Obama)
[ Post Reply | Private Reply | To 43 | View Replies]

To: Truthoverpower

Not only is your writing piss poor, but your actual reasoning (once one is able to figure out what you’re really trying to say) basically is purely fallacious. Capisce?


49 posted on 11/14/2013 1:36:22 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 44 | View Replies]

To: Red Badger

That also fits into the category of high priced technology, and thus is well accepted by the crony capitalist folks....................
***If the LENR scientists were half the charlatan scam artists their critics claim, they’d be all over this angle. My personal opinion of the Widom-Larson theory is that it is baloney, borne out of the need to distance themselves from what resembles cold fusion. But it shows that coming up with a theory based upon scientific political correctness can actually move the ball forward, so it has its value. What we need is a high energy LENR theory that would focus on Electron Capture and attract $200M in seed money just so that regular LENR experiments can be carried out.


50 posted on 11/14/2013 1:39:57 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 45 | View Replies]

To: ZX12R

Basic Derision

asked & answered

———————————www.mail-archive.com/vortex-l@eskimo.com/msg85823.html-——————


51 posted on 11/14/2013 1:44:28 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 48 | View Replies]

To: Kevmo

Ok expert. What a petulant fool you are and once again you resort to liberal tactics of insult the challenger

Show me a real product with their bullshit ok? Or GET WET

Like A 10 MW ( tiny little crap ) power plant that produces power for less than 10c per kwh or therms for less that $4 per MM BTU and then get back to me

Ok , expert in engineering science and technology?

People like you should go to liberal sites and have fun with other morons who love to dream about nonsense.

I’m surrounded by them

Until then keep you stupid comments to yourself or PRODUCE REAL DATA.

I’ve been in this game for a long long time and don’t suffer fools easily

Cheers anyway


52 posted on 11/14/2013 9:50:47 PM PST by Truthoverpower (The guvmint you get is the guvmint you deserve)
[ Post Reply | Private Reply | To 49 | View Replies]

To: Brett66
Oil will just be used to make plastic products.

and lubricants, pharmaceuticals, fabrics, fertilizers, etc....and roads.

53 posted on 11/14/2013 9:52:18 PM PST by Smokin' Joe (How often God must weep at humans' folly. Stand fast. God knows what He is doing.)
[ Post Reply | Private Reply | To 19 | View Replies]

To: Smokin' Joe

can we 3-d print a cold fusion device?


54 posted on 11/14/2013 9:59:50 PM PST by GeronL (Extra Large Cheesy Over-Stuffed Hobbit)
[ Post Reply | Private Reply | To 53 | View Replies]

To: GeronL
Mebbe someday.

I haven't decided if this is going to be significant in the marketplace soon or not (Scientific thought has it's own form of inertia, and overcoming the tendency to stay fixed in course and speed can take significant input). Once overcome, however, vectors can change rapidly, and I work in the oil industry so it could affect me personally.

But I noticed the price of palladium held while other precious metals were dropping. I don't get the impression that is because the auto manufacturers were snarfing it up for catalytic converters for all the new vehicles they are building for the huge economic recovery we're in (/s).

So who is picking up the palladium?

I hadn't realized there was research going into palladium/deuterium, even though I was aware of the nickel hydride devices.

There are a host of other catalytic uses for Palladium, so this may not be a factor.

55 posted on 11/14/2013 10:11:37 PM PST by Smokin' Joe (How often God must weep at humans' folly. Stand fast. God knows what He is doing.)
[ Post Reply | Private Reply | To 54 | View Replies]

To: Kevmo

Wow. The newbie jumped right in with his whining.

I’m guessing a DU invader.


56 posted on 11/14/2013 10:38:12 PM PST by <1/1,000,000th%
[ Post Reply | Private Reply | To 1 | View Replies]

To: Kevmo
Basic Derision

If it ever deserves more than that, you let me know. Until it resembles something like technological progress, that's all it gets. Or until it warrants a research paper in some periodical overseen by real scientists, not the ones created by cold fusion groupies.
57 posted on 11/15/2013 7:50:54 AM PST by ZX12R (Never forget the heroes of Benghazi, who were abandoned to their deaths by Obama)
[ Post Reply | Private Reply | To 51 | View Replies]

To: ZX12R
"Or until it warrants a research paper in some periodical overseen by real scientists, not the ones created by cold fusion groupies."

Many are available. The fact that you do NOT know that simply is reflective of your ignorance on the topic.

Last time I looked, "Naturwissenschaften" qualifed on all counts. Several papers there.

Maybe we can find some magic pixie dust that acts as a seagull repellent.

58 posted on 11/15/2013 12:13:04 PM PST by Wonder Warthog
[ Post Reply | Private Reply | To 57 | View Replies]

To: Truthoverpower

Ok expert. What a petulant fool you are and once again you resort to liberal tactics of insult the challenger
***I didn’t insult you, I insulted your writing and your reasoning.

Show me a real product with their bullshit ok? Or GET WET
***asked & answered. You don’t seem too familiar with the process of science, only just engineering design. They’re completely different. Duhh.

————————www.mail-archive.com/vortex-l@eskimo.com/msg85737.html———————


59 posted on 11/15/2013 6:27:17 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 52 | View Replies]

To: Truthoverpower

Ok , expert in engineering science and technology? People like you should go to liberal sites and have fun with other morons who love to dream about nonsense.
***Dude, your writing. Ouch. Please take that writing class.

I’m surrounded by them Until then keep you stupid comments to yourself or PRODUCE REAL DATA.
***Let’s start with how the Anomalous Heat Effect has been replicated more than 14,700 times. Doesn’t it bother you that so far, EVERY argument you’ve presented is simply countered by an asked & answered file? It should give you an idea of how little you have read up on this phenomena. But, it probably won’t, because you’re so wrapped around the axle.
———————www.mail-archive.com/vortex-l@eskimo.com/msg85732.html———————

I’ve been in this game for a long long time and don’t suffer fools easily
***And therefore we have little room for suffering you until you come up to speed and read something.

Cheers anyway
***TTFN. Hope you actually do the reading, but I won’t be holding my breath.


60 posted on 11/15/2013 6:33:49 PM PST by Kevmo ("A person's a person, no matter how small" ~Horton Hears a Who)
[ Post Reply | Private Reply | To 52 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-66 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
Smoky Backroom
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson