Free Republic
Browse · Search
General/Chat
Topics · Post Article

To: All
Trying to help Freepers make sense of the deluge that is on it's way....

AMD Zacate E-350 Processor Performance Preview

************************************EXCERPT************************************

AMD Brazo Platform, Ontario and Zacate Processors

Specifications & Features


AMD E-350 Processor - Zacate @ 1.6GHz and it's tiny.

The version of the chip we looked at specifically was the higher-end 18 Watt chip that will be branded as the E-350 Fusion processor. This incarnation of Fusion goodness runs at 1.6GHz.  The 9 Watt version, codenamed Ontario, will be coming to market in Q1 2011.  The E-350 has dual "out of order" X86 cores built on a 40nm process technology, with a total of 1MB of L2 cache (512KB per core).  The chip also supports full X86-64 extensions and sports a 64-bit FPU as well.  On die is also a single channel DDR3 memory controller that is rated up to a 1066MHz interface speed and supports up to two DIMM slots.  Finally of course, is AMD's DX11-capable graphics core; specifically a Radeon HD 6310, which also incorporates AMD's new generation UVD3 video decode block that can be found on the recently launched Radeon HD 6800 family of graphics processors.

Paired with the Hudson IO controller chip, or Southbridge, and a few miscellaneous interface chips for things like Gigabit Ethernet and USB3 and you have essentially our full test platform for this performance preview.  Speaking of which, let's detail all of our test systems for you, next.

8 posted on 01/08/2011 9:18:06 AM PST by Ernest_at_the_Beach ( Support Geert Wilders)
[ Post Reply | Private Reply | To 7 | View Replies ]


To: All
And what about futures:.....Discussion on a Forum:

ontario and zacate performance improvements on 28 nm

**********************************EXCERPTs****************************************

CPUs Talk about processors and related technology

**************************

What is the performance increase we should expect from them, once they start being produced on 28 nm next year?

***********************************

Was this even confirmed? Will TSMC actually have enough yields on 28nm to churn out huge quantities of Ontario? By next year?

Better Q is: When will Fusion hit 28nm?

*************************************

GF announced they are starting risk production for 28 nm later this year.. radeon 7000 series (southern islands) must be coming sometime next year.. AMD must logically produce their chips on GF.. so it shouldn't be crazy o assume we will see those chips next year..

**********************************

These here are some scaling parameters from TSMC 40G to GF 28HP
in case of the ARM core.

http://www.globalfoundries.com/newsr.../20100601.aspx



http://www.madboxpc.com/globalfoundr...-en-28nm-hkmg/



Regards, Hans

__________________
~~~~ http://www.chip-architect.org ~~~~ http://www.physics-quest.org ~~~~

9 posted on 01/08/2011 9:53:34 AM PST by Ernest_at_the_Beach ( Support Geert Wilders)
[ Post Reply | Private Reply | To 8 | View Replies ]

Free Republic
Browse · Search
General/Chat
Topics · Post Article


FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson