Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

Adding Acetone to Gasoline Update: Myth or Miracle and the “Check Engine” light. – vanity -
vanity update | 7.26.2005 | RFace

Posted on 07/26/2005 10:55:35 AM PDT by rface

Many months ago, I read a post on FR about adding acetone to gasoline to increase mileage. I tried the method outlined in the posting and paid attention to the naysayers and to those who thought that the idea might work.

Here’s the FR thread that I am referring:
Acetone In Fuel Said to Increase Mileage 15-35%

The original paper:
Pure Energy Systems: Acetone In Fuel Said to Increase Mileage

I immediately noticed that my 1996 Ford Explorer w/ 5.0 L V8 increased from 16 mpg to 19 or 20 mpg. This was a substantial increase, so I have added acetone to my gasoline for some 700 gallons of gasoline --- which equates to around 33 tankfuls of gas or 13,000 miles. I now add 10 ml acetone/gal of gasoline at every fuel stop.

My Ford Explorer has about 175,000 miles on it, and the “Check Engine” light (probably Oxygen sensor) has been on for about 50,000 miles – but it runs good and uses no oil. I have changed the oil regularly and I keep my tires at ~35 lbs of air pressure. It’s a good running Ford and it looks good --- when I get around to cleaning it up.

The Miracle:
I was driving home from work a few days ago and something didn’t look right on my dashboard……something was wrong.

I looked again at the oil pressure gauge. Okay. Temperature? Okay. Voltmeter? Okay. Hmmmmm. The “Check Engine” light is off.

What’s up with that?? Probably the dang bulb finally burned out.

No biggie. The Ford still runs good and I was tired of seeing that “Check Engine” light stare me in the face.

When I got home, I turned the engine off, and then re-turned the key to the accessory switch….and the dash board lit up as it was supposed to …. Including my “Check Engine” light!

Results: Yes, folks. Acetone in your gasoline will increase your mpg and it will make your “Check Engine” light go off.

Lesson Learned: This is just another example of the truth in the philosophy that I occasionally go by: “If you ignore a problem long enough, it will go away.”


TOPICS: Miscellaneous
KEYWORDS: acetone; energy; zaq
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-80 ... 201-207 next last
To: F15Eagle

Painting model airplanes when I was about 10 or 11, I was pouring paint thinner into a styrofoam cup and what dumbfounded when my feet starting getting wet - went straight through it.


41 posted on 07/26/2005 11:27:58 AM PDT by Sax
[ Post Reply | Private Reply | To 35 | View Replies]

To: PeterPrinciple
I have seen contrary opinions - and I have not had a fuel problem yet.

I think one of the reasons that acetone is NOT added to the "gasoline pool" is that the acetone evaporates out of the gasoline too fast....especially in a fuel tank/system that is not air-tight. I run through gasoline pretty quickly in the Explorer.

I would like to see the change in the concentration of acetone in a tank full of gasoline over time.

42 posted on 07/26/2005 11:28:38 AM PDT by rface ("...the most schizoid freeper I've ever seen" - New Bloomfield, Missouri)
[ Post Reply | Private Reply | To 37 | View Replies]

To: CJ Wolf

I use 1 gal of vinegar in my dishwasher once in a while. Serviceman recommended. He said it's cheaper than those dishwasher cleaners aprox $1.00 a gallon.


43 posted on 07/26/2005 11:29:47 AM PDT by alice_in_bubbaland ("Consensus seems to be the process of abandoning all beliefs, principles, values and policies")
[ Post Reply | Private Reply | To 20 | View Replies]

To: rface

Acetone added to gasoline is a disaster waiting to happen. DO NOT ADD ACETONE TO YOUR GAS UNLESS YOU ARE WILLING TO VOID YOUR WARANTY!


44 posted on 07/26/2005 11:31:08 AM PDT by devane617
[ Post Reply | Private Reply | To 1 | View Replies]

To: rface

The only concern I would have is For a clogged catalytic converter..


45 posted on 07/26/2005 11:31:14 AM PDT by sheik yerbouty ( Make America and the world a jihad free zone!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: rface

More from bobistheoilguy:

"Here is my thinking how people sometimes get better gas mileage by adding bogus things to vehicals that claim to increase fuel mileage. They instantly change their driving habits. They are driving more conservatively after adding such devices, and contribute the increase in mileage to the product. "

Your improved gas mileage most likely came from from other factors. Been there and done that.


46 posted on 07/26/2005 11:31:50 AM PDT by PeterPrinciple (Seeking the truth here folks.)
[ Post Reply | Private Reply | To 1 | View Replies]

To: PeterPrinciple
There are lots of reasons why refiners would love to blend it in. They still don't. Why...becuase it can kill fuel system parts. It's not a conspiracy...it would already be there if not for the serious technical problems.

I posted that in the original thread, it probably wreaks havoc on the rubber and plastic pipes and seals. The concentrations are pretty low in this application, which is probably why the cars that have tried it have not yet fallen apart, but who knows about longer term usage. Also, I wonder if the corrosion problems could be worked out. I was also concerned about the possible "wash down" of the cylinder walls, of the oil layer that protects them, just a few caveats.. I might try this on an older cheapo car, but not on my new Odyssey...

47 posted on 07/26/2005 11:31:50 AM PDT by Paradox (I just neutered my cat, now he's a Liberal.)
[ Post Reply | Private Reply | To 37 | View Replies]

To: Sax
"Painting model airplanes when I was about 10 or 11, I was pouring paint thinner into a styrofoam cup and what dumbfounded when my feet starting getting wet - went straight through it."

When I was about the same age building models I was amazed how I felt after an hour of gluing parts together. I ended up with what I now term, "concept cars".
(joking only folks, I really do not remember gluing parts.)
48 posted on 07/26/2005 11:33:34 AM PDT by hophead (are not advocates)
[ Post Reply | Private Reply | To 41 | View Replies]

To: golfboy

yeah...plastic and acetone dont get along too well


49 posted on 07/26/2005 11:34:06 AM PDT by joesnuffy (The state always has solutions to the problems it creates...more freedom will never be a solution)
[ Post Reply | Private Reply | To 3 | View Replies]

To: Steely Tom

common solution for 02 sensors. if you think about it, the sensor is actually IN your exhaust. has the potential to get extremely dirty..


50 posted on 07/26/2005 11:35:30 AM PDT by absolootezer0 ("My God, why have you forsaken us.. no wait, its the liberals that have forsaken you... my bad")
[ Post Reply | Private Reply | To 32 | View Replies]

To: Paradox

You will like bobistheoilguy. Others have tried it there with a lot of mixed results from lower mileage to better. No clear answer and lots of opinions that I could see.


51 posted on 07/26/2005 11:36:02 AM PDT by PeterPrinciple (Seeking the truth here folks.)
[ Post Reply | Private Reply | To 47 | View Replies]

To: PeterPrinciple

negative. I am always concious of my mileage and my driving habbits. I am annal about it. You won't find a V8 Explorer getting 20 mpg driving like I am doing....it's just not gonna happen.....but it is safe to be skeptical


52 posted on 07/26/2005 11:36:56 AM PDT by rface ("...the most schizoid freeper I've ever seen" - New Bloomfield, Missouri)
[ Post Reply | Private Reply | To 46 | View Replies]

Comment #53 Removed by Moderator

To: Sax
Interesting read, yes. However, I couldn't help but be made extremely skeptical by these statements, regarding alcohol in fuel:
In my Neon, it frequently has cut the MPG in half on trips when I take pot luck at the pump.

Half the mileage? No way. My BS meter is beyond pegged.

In below-zero weather, the water and alcohol can form abrasive, icy particles that may damage fuel pumps and clog injectors.

Water and alcohol forming icy particles? I wonder if he has ever heard of the winter gasoline additive called "HEET". It's alcohol, and meant to prevent any water in your gas tank from turning into an icing problem.

FWIW.

54 posted on 07/26/2005 11:37:26 AM PDT by newgeezer (Just my opinion, of course. Your mileage may vary.)
[ Post Reply | Private Reply | To 16 | View Replies]

To: PeterPrinciple

so swap out to braided steel/ stainless steel lines.


55 posted on 07/26/2005 11:37:29 AM PDT by absolootezer0 ("My God, why have you forsaken us.. no wait, its the liberals that have forsaken you... my bad")
[ Post Reply | Private Reply | To 37 | View Replies]

Comment #56 Removed by Moderator

To: rface

As kids, when we got our hands on some dry ice, we'd put it in a can of acetone. The stuff got so cold, anything you dropped in it -- earthworms, for instance :-) -- instantly froze solid.


57 posted on 07/26/2005 11:42:03 AM PDT by T'wit (If any liberals get to Heaven, they'll lecture God on what's wrong with it and reform it all to Hell)
[ Post Reply | Private Reply | To 1 | View Replies]

To: newgeezer
"Water and alcohol forming icy particles? I wonder if he has ever heard of the winter gasoline additive called "HEET". It's alcohol, and meant to prevent any water in your gas tank from turning into an icing problem."

All the gas anti freeze products are mostly isopropyl alcohol. I use straight rubbing alcohol in the winter. About 1/2 of the small bottle prior to filling the tank. Been doing it for years without a problem.
58 posted on 07/26/2005 11:42:15 AM PDT by hophead (are not advocates)
[ Post Reply | Private Reply | To 54 | View Replies]

To: Minus_The_Bear

"ping" for the record


59 posted on 07/26/2005 11:45:13 AM PDT by rface ("...the most schizoid freeper I've ever seen" - New Bloomfield, Missouri)
[ Post Reply | Private Reply | To 1 | View Replies]

To: rface

Just for fun, we used to apply some really fine plastic coatings on various items by merely dissolving the plastic cores used in long rolls of film in acetone. Then when the plastic was liquified ( the cores dissolved very fast and we used just enough acetone to cover the core), we dipped our test items into the new plastic/acetone solution and out came a perfectly plastic-coated keepsake. Worked well with most everything we tried. Acetone is a great solvent, but try not to breath its fumes. It also dissolves alveoli and that's not healthy. In concentrated amounts it will dissolve any plastics it finds in a vehicle.


60 posted on 07/26/2005 11:47:09 AM PDT by Paulus Invictus
[ Post Reply | Private Reply | To 10 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-80 ... 201-207 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson