Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

The Peak Oil Crisis: Transitioning to Cold Fusion
Falls Church News Press ^ | Nov 16 2011 | Tom Whipple

Posted on 11/16/2011 10:23:18 PM PST by Kevmo



The Peak Oil Crisis: Transitioning to Cold Fusion By Tom Whipple
Wednesday, November 16 2011 02:45:44 PM

Events move quickly these days. Two weeks ago we were watching Bologna, Italy where an entrepreneur and a retired physics professor claimed to have discovered the Holy Grail of energy - cold fusion or as it is now known: Low Energy Nuclear Reactions. At the time, there was (and still is) widespread concern that the various demonstrations of an energy-producing devices were a scam as the developers, for commercial reasons, refused to give outsiders access to their inner workings .

If you are coming late to this story, the Italians' "energy catalyzer" is a table-top-sized device containing powdered nickel known as the "reactor." When hydrogen is introduced into the container and heat is applied, the device gets hotter and hotter so that the output of heat exceeds the input by so much that no known chemical reaction can be responsible for generating the heart. This leads to the conclusion that the hydrogen is fusing with the nickel producing energy similar to that coming from the sun or from the detonation of a hydrogen bomb .

Now so much energy coming from such a small and inexpensive device, in violation of what are thought to be the principles of physics, seems too good to be true. As this phenomenon had not been independently repeated and verified by other laboratories, many pronounced it a fraud, a few the greatest breakthrough of the age, and the rest of us remained agnostic while awaiting further developments .

They were not long in coming. Last week it was learned that George Miley, a Professor Emeritus of nuclear engineering at the University of Illinois who has been conducting experiments similar to those in Italy for many years, has been observing anomalous amounts of heat emanating from test equipment similar to that being used in Bologna. Miley has been experimenting with palladium-zirconium alloys, but says his experiments are producing so much heat that could only be coming from fusion of atomic nuclei. Unlike the Italian experiments which are aimed at developing a proprietary commercial product, the Illinois experiments are being conducting under the auspices of a state university with details of the experiments being made known as soon as possible. At a university the aim of scientific research is to win a Nobel Prize, or at least academic prestige, not to make money .

While a second report does not adequately confirm that heat-producing, low-energy nuclear reactions are a real phenomenon, it is does seem to reduce the likelihood of fraud on the part of a single man or organization. Furthermore it increases the possibility that we could be witnessing the early stages of what could be one of the greatest scientific discoveries in human history - production of unlimited amounts of cheap, pollution-free energy .

We could be witnessing the early stages of one of the greatest scientific discoveries in human history .

Let's suspend our disbelief for a few moments that anything too-good-to-be-true ever happens anymore, and pretend that these reports really do portend the age of low energy nuclear fusion; that within decades energy shortages will be a thing of the past; and every person on earth could, and I say could advisedly, be blessed with unlimited amounts of cheap energy .

The problem for now, of course, is getting from here to there. Most of you likely have noticed that the world is beset with an abnormal amount of trouble at the minute - the EU financial system is coming unstuck; many think that the fabled "double-dip" recession (depression?) is only weeks away; governance of the US is in near gridlock; global warming's droughts and floods have many hungry, dying of thirst, or standing in water up to their armpits; world oil production is on course to starting dropping within the next few years; and there are now seven billion of us running around with the UN projecting we could number 15 billion by the end of the century .

For now all we have are some promising laboratory experiments and a handful of prototypes. It is starting to look as if there could be many ways of making heat by getting hydrogen to fuse with metal at low temperatures. Sorting out which method would be best, even one to get started with, is likely to take some time. Then somebody needs to tell the Nuclear Regulatory Commission that we would like to install some 100 million or so nuclear reactors, albeit small ones, in our buildings .

Then there are the rice bowls that would have to be broken. Somebody will have to tell OPEC, Exxon, the power companies, coal mines, and gas well frackers that we won't be needing their services anymore and that they should get into some other line of work. This, of course, raises the possibility that the Congress, under pressure from lobbyists, chambers, and unemployed constituents, outlaws fusion reactors under one pretext or another - no matter how well and cheaply they might work. The point of all this is to say that there could be considerable resistance to the advent of cheap, clean energy that will inevitably upset many apple carts even if it promises to save mankind from extinction by an ever-warming climate .

There is another side of this story however. Much of the world is desperate (or soon will be) for affordable energy. Japan and the EU have little or no indigenous supplies of fossil fuels remaining and are backing away from conventional nuclear power as too dangerous. Even the Chinese are catching on that too much carbon in the air can be hazardous to your economic well-being. Europe, Japan, Korea, India, and China are not incompetent in technological matters. Nor are they as susceptible to pressures from the old order seeking to preserve its ways of making money .

If the current experiments are repeatable and the technology is viable, cold fusion is likely to go viral very quickly with thousands of laboratories and corporations around the world rushing for a piece of the next Internet. The next year or so could tell us a lot about the course of civilization in coming decades .


________________________________________
Tom Whipple is a retired government analyst and has been following the peak oil issue for several years.







TOPICS: Business/Economy; Extended News; News/Current Events; Technical
KEYWORDS: cmns; coldfusion; ecat; lenr
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-95 last
To: Johnny B.

I’ve been following the research that comes out of Miskoic University for years. For my money, they do the very best of work in the Lovecraft Mythos.


81 posted on 11/18/2011 6:48:57 AM PST by Mycroft Holmes (Returned for regrooving...)
[ Post Reply | Private Reply | To 80 | View Replies]

To: 4FreeSpeach

I’ll go one step further - there is no credible independent verification of *any* of the Ecat results.

That doesn’t mean they are false, but it does mean that this is not science we are seeing, but marketing.

Since there is no independent verification looking at Rossi’s history and character is intelligent. Rossi personally fails my credibility test.


82 posted on 11/18/2011 7:09:54 AM PST by Triple (Socialism denies people the right to the fruits of their labor, and is as abhorrent as slavery)
[ Post Reply | Private Reply | To 37 | View Replies]

To: Johnny B.

I don’t recall Szabo being one of those guys to explain. Notably, you did not explain any of them.


83 posted on 11/18/2011 8:03:34 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 80 | View Replies]

To: Kevmo

You have no clue about skepticism or the scientific method.


84 posted on 11/20/2011 12:57:39 PM PST by dinodino
[ Post Reply | Private Reply | To 3 | View Replies]

To: Kevmo

That stuff about a control run somehow ruining the device is a bunch of crap. Rossi could, and should, do a control run without injecting any gas at all. I’m beginning to think this Jed is in on the scam.


85 posted on 11/20/2011 1:01:36 PM PST by dinodino
[ Post Reply | Private Reply | To 9 | View Replies]

To: dinodino

You have no clue about skepticism or the scientific method.
***You have no clue about how to proceed inductively.
That article describes you rather perfectly.


86 posted on 11/20/2011 8:10:34 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 84 | View Replies]

To: All

Less Than $500 To Go!!
Even George Would Be Shocked
To Find Some FReepers
Haven't Donated To FR This Quarter!
Every Dollar Helps!!

Sponsoring FReepers are contributing
$10 Each time a New Monthly Donor signs up!
Get more bang for your FR buck!
Click Here To Sign Up Now!


87 posted on 11/20/2011 8:11:06 PM PST by musicman (Until I see the REAL Long Form Vault BC, he's just "PRES__ENT" Obama = Without "ID")
[ Post Reply | Private Reply | To 86 | View Replies]

To: dinodino

That stuff about a control run somehow ruining the device is a bunch of crap.
***I don’t think so. But it’s simple enough to do a control run without the powder if that is the case.

You mean this part of his post, right?

Yup. There is another huge practical problem with doing a blank run.
Injecting nitrogen, air or some other gas into the powder will probably
contaminate and destroy the powder. This is a problem because of powder is
expensive and difficult to fabricate. It is also a problem because after
you contaminate it, you could not produce heat from it. You would have to
produce heat first, then do your destructive blank run.

This is like demanding that Mr. Ford first demonstrate that his Model T can
drive at 40 mph, then he must demonstrate that when you crash it into a
brick wall at 40 mph, it is destroyed and cannot drive at any speed after
that.


88 posted on 11/20/2011 8:14:44 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 85 | View Replies]

To: Kevmo

Completely ridiculous assertion on Jed’s part. Like I said, do the control run WITHOUT injecting gas at all. However, since Rossi claims this thing will cost pennies to fill up, I don’t see why injecting some other gas and possibly wasting powder on a test run is a problem.


89 posted on 11/21/2011 1:05:48 AM PST by dinodino
[ Post Reply | Private Reply | To 88 | View Replies]

To: dinodino

Completely ridiculous assertion on Jed’s part. Like I said, do the control run WITHOUT injecting gas at all. However, since Rossi claims this thing will cost pennies to fill up, I don’t see why injecting some other gas and possibly wasting powder on a test run is a problem.
***You have no concept of economies of scale. When I worked for a well-known semiconductor company, we had maybe 10 prototype samples of a chip that ultimately would sell for less than 60cents apiece. But those prototype samples were worth far more than 60 cents. Also, at that time, trying to prove some scientific point is far down the list of priorities.


90 posted on 11/21/2011 6:55:36 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 89 | View Replies]

To: Kevmo

I understand completely! First of all, Rossi has enough powder to make and refuel the 1 MW unit he “sold,” right? He couldn’t spare a bit of powder to run a test with a small unit?

Second: I reject the idea that exposure to air somehow ruins the powder. Are Rossi’s reactor cores air-tight and shipped pre-purged with hydrogen? I rather doubt it!

The whole thing is ridiculous. At best, Rossi is an inept alchemist who has no idea how his invention works; at worst, he’s a con artist.


91 posted on 11/21/2011 7:03:39 PM PST by dinodino
[ Post Reply | Private Reply | To 90 | View Replies]

To: dinodino

He couldn’t spare a bit of powder to run a test with a small unit?
***How does that help him? Would he end up selling more units that way? He’s the one who owns the technology, so how he chooses to bring it to market is his business. There is no patent protection outside of Italy.


92 posted on 11/21/2011 7:13:37 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 91 | View Replies]

To: Kevmo

You are not thinking clearly. Rossi held these semi-public tests to prove his machine works, right? A control test would have added a lot of credibility.


93 posted on 11/21/2011 7:26:56 PM PST by dinodino
[ Post Reply | Private Reply | To 92 | View Replies]

To: dinodino

You are not thinking clearly. Rossi held these semi-public tests to prove his machine works, right?
***Not necessarily. He originally said there would be zero or very few public tests, but he relented when Focardi asked him to do some. Focardi is in ill health and craves the recognition due to him.

A control test would have added a lot of credibility.
***I don’t think credibility was high on his list of concerns.


94 posted on 11/21/2011 8:27:04 PM PST by Kevmo (When a thing is owned by everybody nobody gives value to it. Communism taught us this. ~A. Rossi)
[ Post Reply | Private Reply | To 93 | View Replies]

To: Kevmo
***I don’t think credibility was high on his list of concerns.
That's good, because Rossi doesn't have any credibility at all.
95 posted on 11/22/2011 3:51:59 AM PST by dinodino
[ Post Reply | Private Reply | To 94 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-95 last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson