[Bean Counter]

For startes, it wasn't necessary to "melt" the steel in the WTC. The jet fuel fire was more than sufficient to heat the steel until it lost structural integrity, and soften the steel, and that is part of what led to the collapse. The collapses may well resemble other buildings that collapsed from controlled demolitions, but nobody anywhere has presented any kind of proof of these allegations what so ever.

Every time a major diaster happens there is always someone who pops up with some wild explanation of what happened. Remember the women who testified before Congress that they saw and heard the demolition charges go off that breached the levees in NO?? Same gig.

This group is just another collection of Fruit Bats looking for thier 15 minutes in the spotlight. The fact that they get any press coverage at all is proof of what a slow news cycle looks like...

[NonLinear]

For startes, it wasn't necessary to "melt" the steel in the WTC. The jet fuel fire was more than sufficient to heat the steel until it lost structural integrity, and soften the steel, and that is part of what led to the collapse.

So true. But it is so much easier to adopt a conspiracy theory than to find the steel tables, note that the stee at 800F has already lost almost half it's strength compared with ambient, and to find that jet fuel flames are more than twice that hot. Oh wait...it took almost 5 minutes to find that table. Yep, way too hard!

Had the asbestos insulation not been discontinued, they may well have been finishing the remodeling on the two towers about now...

STANDARD ALLOWABLE STRESS TABLE
Material	P No.	UNS No.	ALLOWABLE STRESS, ksi								MIN. YIELD STRESS, ksi
			100°	200°	300°	400°	500°	600°	700°	800°	100°	200°	300°	400°	500°	600°	700°	800°
SA 516-70 Carbon Steel	1	K02700	20.0	20.0	20.0	20.0	20.0	19.4	18.1	12.0	38.0	34.8	33.6	32.5	31.0	29.1	27.2	25.5
Type 304 Stainless Steel	8	S30400	20.0	20.0	18.9	18.3	17.5	16.6	15.8	15.2	30.0	25.0	22.4	20.7	19.4	18.4	17.6	16.9
Type 304L Stainless Steel	8	S30403	16.7	16.7	16.7	15.8	14.7	14.0	13.5	13.0	25.0	21.4	19.2	17.5	16.4	15.5	15.0	14.5
Type 309S Stainless Steel	8	S30908	20.0	20.0	20.0	20.0	19.4	18.8	18.2	17.7	30.0	26.3	24.2	22.7	21.6	20.8	20.32	19.7
Type 310 Stainless Steel	8	S31008	20.0	20.0	20.0	19.9	19.3	18.5	17.9	17.4	30.0	26.5	24.2	22.6	21.4	20.6	19.9	19.4
Type 316 Stainless Steel	8	S31600	20.0	20.0	20.0	19.3	18.0	17.0	16.3	15.9	30.0	25.9	23.4	21.4	20.0	18.9	18.2	17.7
Type 316L Stainless Steel	8	S31603	16.7	16.7	16.7	15.7	14.8	14.0	13.5	12.9	25.0	21.3	19.0	17.5	16.4	15.6	15.0	14.4
Type 317L Stainless Steel	8	S31703	20.0	20.0	19.6	18.9	17.7	16.9	16.2	15.5	30.0	25.5	22.8	21.0	19.7	18.7	18.0	17.2
Type 347 Stainless Steel	8	S34700	20.0	20.0	18.8	17.8	17.2	16.9	16.8	16.8	30.0	27.6	25.7	24.0	22.6	21.5	20.7	20.3
Alloy 200	41	N02200	10.0	10.0	10.0	10.0	10.0	10.0	NP	NP	20.0	20.0	20.0	20.0	18.9	17.2	---	---
Alloy 201	41	N02201	8.0	7.7	7.5	7.5	7.5	7.5	7.4	7.2	12.0	11.5	11.3	11.2	11.2	11.2	11.1	10.8
Alloy 400	42	N04400	18.7	16.4	15.2	14.7	14.7	14.7	14.6	14.3	28.0	24.5	22.8	22.1	22.0	22.0	21.9	21.4
Alloy 600	43	N06600	22.9	22.9	22.9	22.9	22.9	22.9	22.9	22.9	35.0	32.0	31.2	30.7	30.3	29.9	29.4	28.7
Alloy 625	43	N06625	34.3	34.3	34.3	33.6	32.9	32.4	31.8	31.2	55.0	53.0	51.4	49.9	48.5	47.2	46.1	45.2
C-22(c) Alloy	44	N06022	28.6	28.6	28.2	27.2	26.5	26.0	25.6	25.3	45.0	40.1	36.9	34.3	32.2	30.6	29.4	28.6
Alloy C-276	44	N10276	27.3	27.3	27.3	27.3	26.9	25.2	24.0	23.1	41.0	37.3	34.5	32.0	29.8	28.0	26.7	25.7
B-3(c) Alloy	44	N10665	31.4	31.4	31.4	31.4	31.4	31.2	30.9	30.6	51.0	47.9	45.4	43.4	41.9	40.8	39.8	38.7
Alloy 20	45	N08020	22.9	22.9	22.6	22.2	22.1	22.1	21.9	21.8	35.0	30.9	29.6	28.4	27.3	26.5	26.0	25.2
Alloy 800	45	N08800	20.0	20.0	20.0	20.0	20.0	20.0	20.0	20.0	30.0	27.7	26.6	25.8	25.1	24.5	23.8	23.2
Alloy 825	45	N08825	23.3	23.3	23.3	23.3	23.3	23.3	23.3	23.0	35.0	32.1	30.5	29.1	27.8	26.7	26.0	25.6
AL-6XN(c) Alloy 3/16" to 3/4"	45	N08367	27.1	27.1	25.7	24.6	23.8	23.3	22.9	22.6	45.0	39.3	35.7	32.9	30.8	29.1	27.9	27.0
Alloy 904L	45	N08904	20.3	16.7	15.1	13.8	12.7	11.9	11.4	NP	31.0	25.1	22.7	20.8	19.0	17.8	17.1	---
G-30(c) Alloy	45	N06030	23.3	23.3	23.3	22.5	21.9	21.3	20.5	19.7	35.0	30.0	27.5	25.8	24.6	23.6	22.8	21.9
Titanium Grade 2	51	R50400	14.3	12.4	10.3	8.8	7.6	6.5	NP	NP	40.0	31.5	25.6	19.6	14.8	14.8	---	---
Zirconium 702	61	R60702	15.7	13.7	11.2	9.1	7.4	6.0	5.2	NP	30.0	23.1	18.0	14.0	11.0	9.0	7.9	---
NOTES: NP = Not Permitted by ASME Section VIII, Division 1 for use at this temperature. Temperatures are in degrees Fahrenheit. 1 ksi = 1000 psi Stresses listed above are the highest allowed by ASME Section VIII, Division 1 (A99 Addenda) for plate.

[Freedom4US]

A lot of it is crooks writing books. Betcha my last dollar the Pres/JFK conspiracy nut-jobs are bankrolling this for a small but useful profit.