Free Republic
Browse · Search
News/Activism
Topics · Post Article

Skip to comments.

A Plan to Save American Manufacturing
TradeAlert.org ^ | Wednesday, December 31, 2003 | Kevin L. Kearns, Alan Tonelson, and William Hawkins

Posted on 01/01/2004 9:04:11 AM PST by Willie Green

For education and discussion only. Not for commercial use.

Although warnings about the crisis engulfing American manufacturing have been intensifying for months, the sector´s woes continue to be significantly underestimated – certainly by official Washington and even by many manufacturers themselves.  In fact, despite the current boost in growth fueled by deficit spending, tax cuts, mortgage re-financings, and other one-time stimuli, the decline of American manufacturing is fast nearing the point of irreversibility – at least from the standpoint of restoring a critical mass of industries producing in the United States to world leadership.

The nation, in short, faces a manufacturing emergency. Unless drastic measures are taken quickly, this emergency will turn the United States into a second-class manufacturing power, greatly diminishing its own future economic prospects. Further, national security and flexibility in foreign affairs will be severely compromised.  Finally, the international imbalances being created by the manufacturing crisis will likely push the world into a major dollar crisis and could cause a protracted depression.

In part, the manufacturing crisis reflects the economy´s latest cyclical downturn and the deflating of the bubble of the 1990s.  Likewise, the manufacturing employment portion of the crisis stems in part from the increases in productivity in recent years.  But neither of these factors sufficiently explains the root cause of manufacturing´s current troubles, which are the worst by many measures since the end of World War II, and that is the cumulative and continuing effects of two decades of misguided, ill-advised, and weak-willed U.S. trade and globalization policies.

During this period, Washington has consistently failed to open foreign consumption markets adequately to U.S. producers – despite years of promises and the fanfare that greeted each new trade agreement.  In addition, the American government has failed miserably to combat predatory foreign trade practices aimed at undermining U.S. producers in their home market.  Perversely, Washington has responded to these failures by encouraging U.S. manufacturers to supply their home market from low-cost third world production platforms like Mexico and China. And most U.S. multinational corporations, and indeed some of their smaller suppliers, have responded with enthusiasm.

NO TIME TO LOSE

The most serious global macroeconomic dangers stemming from the continued flight of American manufacturing overseas have to date been avoided and may be postponed still further by continued financial policy legerdemain – though the faster America´s international debts keep rising, the more difficult the challenge of correcting the imbalances. But regardless of when the crunch actually comes, the weakening of domestic manufacturing is already undermining the material foundations of American national success.

The prolonged wage slump triggered by the overseas migration of America´s best-paying jobs on average has been rippling through the U.S. economy and American society for at least two decades.  The loss of these important jobs represents a shrinking of the employment base needed for a middle-class standard of living, stable families, and the local and state tax revenues necessary for a first-world level of responsibly financed public infrastructure and social services. Consequently, Americans find increasingly at risk their hard-won 20th century gains in access to quality education, health care, and retirement security (whether paid for by a solvent public sector or a sufficiently broad-based and profitable private sector).

In addition, the manufacturing crisis raises serious questions about the U.S. economy´s ability to maintain a high-tech, world-leading military without worrisome dependence on foreign products and technologies.  Although it is true that defense-related imports come overwhelmingly from long-time allies or traditionally friendly countries, it is just as true that they are growing rapidly at a time when major disagreements increasingly mark the relationships between the United States and these countries.

Further, the massive loss of tax revenue – both corporate and personal – directly attributable to a disappearing industrial base will undoubtedly constrain America´s ability to sustain military operations in both peacetime and wartime at levels that U.S. policymakers have come to take for granted.  Thus the country faces a future in which the ability to project power and thereby affect events and outcomes the world over will be much more limited than anytime in the last century and a quarter.

Most worrisome, the decline of American manufacturing is quickly feeding on itself and gaining unstoppable momentum. Washington´s continuing failure to secure equitable terms of trade forces more and more U.S. firms to compensate by outsourcing.  These moves create powerful pressure for growing numbers of the remaining hold-out companies to follow suit.

The migration of prime contractors overseas inexorably pulls much of their supply chains with them. The export of blue-collar production work leads to the export of white-collar manufacturing-related work, as companies seek the advantages of locating researchers and designers near the factories they service.  In fact, there is a continuous feed-back loop between R&D efforts and the factory floor, with the two functions, R&D and production, operating in tandem.  And as is well documented, R&D and other technology work often produce a clustering effect, which draws labs and similar facilities from other industries in search of new synergies. The notion that the United States will retain high-end design functions while letting production migrate overseas is wishful thinking.  Without major globalization policy changes, this vicious cycle of manufacturing flight cannot be turned into a virtuous cycle of manufacturing resurgence.

LESSONS OF THE RECENT PAST

The following action plan for saving and reviving U.S. industry incorporates recent policy lessons that Americans simply can no longer afford to ignore.

First, although America´s regulatory and tax systems have unnecessarily raised domestic business costs in many instances, the manufacturing crisis springs from far deeper roots. No regulatory, health care, or tax reform schemes that would produce acceptable economic, social, or political results can overcome the damage being done to American manufacturing by today´s globalization policy failures. Improved industrial competitiveness cannot and should not be based on gutting the basics of a just, humane, and inclusive society. Fundamentally new globalization policies are the sine qua non for saving and reviving American manufacturing.

Second, the United States will always have more control over its own actions than over the actions of other countries. Therefore, the keys to reversing American manufacturing´s decline lie neither in more market-opening trade agreements nor in efforts to micro-manage economic and social conditions overseas. Despite decades of so-called free trade agreements, too many foreign markets still remain too closed to U.S. exports. The main reason: Most of the world´s countries view trade as a zero sum game, with a piece of the American domestic market as the prize.  The handful of economies wealthy enough to consume American-made goods can erect new trade barriers faster than U.S. negotiators can even identify them. The U.S. government, moreover, has too much trouble enforcing its own laws and regulations here at home to imagine that enforcing foreign laws and regulations, even those imposed by future trade agreements, will be successful.

Instead, to achieve the necessary results, the United States must focus on managing its own behavior and controlling access to its own market, unilaterally conditioning that access ona strategic analysis of its own national needs and on acceptable practices by its trade partners. In addition, the United States must rely mainly on its own power and leverage to achieve satisfactory terms of trade.  As the record unmistakably shows, one-country-one-vote international organizations like the World Trade Organization too readily turn into mechanisms for undermining American sovereignty, diluting American power, and maintaining global economic free-riding.

Finally, Washington must recognize that simply promoting economic growth and higher incomes abroad will not alone cure U.S. manufacturing´s ills and rebalance America´s trade accounts. Most countries refuse to trust their economic fates to market forces or refuse to permit higher domestic growth to draw in proportionately higher volumes of imports. In short, too little commerce around the world is free enough to allow potential future growth to serve as a U.S. trade and manufacturing cure-all.

The following U.S. Business and Industry Council manufacturing blueprint emphasizes short-term emergency measures for reversing domestic manufacturing´s decline and laying the foundation for its revival. But it also includes longer-term proposals for ensuring that U.S. trade and globalization policies do not revert to the practices that have produced today´s crisis.

EMERGENCY MEASURES

1. The president must declare that the United States faces a manufacturing, R&D, and outsourcing emergency no less threatening to America´s long-term future than even the Great Depression. He must also make clear that the crisis stems mainly from the manipulation of world trading system by mercantilist countries and to the encouragement of offshoring by U.S. trade policy.

2. The president should create an Apollo Program-type task force in the federal government to oversee Washington´s response to the manufacturing crisis. Its mission should be to restore domestic U.S. manufacturing to global preeminence and to boost domestic manufacturing employment and wages.  The program should involve all agencies of U.S. government.

3. Federal R&D spending should be tripled and Washington should offer matching grants to industry.  Special emphasis should be placed on tasking the national labs with helping to develop commercially viable, high-tech products to be manufactured in the United States.

4. The U.S. trade deficit should be quickly and dramatically reduced by imposing a “variable trade equalization tariff” on imports from countries running a trade surplus ten percent or greater of total bilateral trade.  These tariffs should be increased each year until bilateral surpluses fall below the threshold level, at which time they would be removed. Tariffs should be imposed on U.S. trading partners as soon as surpluses reach the 10 percent threshold.

The United States should offer a partial exemption for the world´s poorest countries, but only if concrete, measurable trade breaks from the other OECD countries follow suit and only if the developing country seeking the exemption demonstrates a commitment to democracy and the economic advancement of all its people.  Exemptions are not intended to enrich corrupt, dictatorial elites.

In addition, exceptions would be made for energy imports and other commodities that are not found in the United States and for which no acceptable substitutes exist.

5. Companies manufacturing or assembling in the United States should be barred from treating service work performed overseas as a deductible business expense.  Private companies that outsource overseas the processing of sensitive records, such as medical and financial records, must ensure that their subcontractors meet U.S. privacy standards or face stiff fines.  

6.. Washington should declare a moratorium on all current and future free trade talks pending development of new national trade strategy. The United States government clearly has lost the ability to negotiate trade agreements that enrich the great majority of Americans and strengthen the domestic manufacturing base on net. U.S. leaders should not engage in trade negotiations until this ability is regained.

To develop a fundamentally new national trade strategy, the president and Congress should appoint a National Trade Strategy Commission that includes representatives of business plus civil society groups, such as labor unions and environmental groups. The business representatives on the Commission should be dominated by companies and industries that produce the great majority of their product and value in the United States. The Commission should also include representatives of the nation´s science and technology and national security communities.

7. Washington should declare a moratorium on U.S. compliance with WTO panel decisions pending dramatic reform of organization to reflect America´s position in world economy. The UN Security Council veto and the IMF/World Bank weighted voting systems are possible models of international organization structures appropriate to America´s geopolitical and economic superpower status. If appropriate reform is not completed by the end of 2005, the United States should declare its intention to withdraw from the organization as soon as legally permissible.

8. Washington should declare a moratorium on U.S. compliance with NAFTA panel decisions pending reform of NAFTA´s dispute-resolution process to reflect U.S. predominance in the North American economy. In addition, NAFTA´s rules of origin and external tariffs should be revised to offer meaningful trade preferences to goods with much higher levels of North American content.

9. The U.S. government should resolve the Foreign Sales Corporation tax dispute with the European Union and the World Trade Organization by replacing the current FSC tax incentive with a major tax break for any company, either American or foreign-owned, that performs genuine manufacturing activity in the United States.  Qualification for the tax break would require detailed certification that true manufacturing is occurring in the United States.

10. The United States should expedite procedures for anti-dumping and countervailing duty suits. Threshholds for standing, actionability, and remedies should all be eased. In addition, remedies should be extended to companies up and downstream from immediately affected industries to ensure protection for suppliers and consumers, and prevent foreign economic interests from using divide and conquer tactics against domestic industries.

11. The current steel tariffs should be expanded to cover industries using significant quantities of U.S.-made steel.  Further, the option of extending the tariffs beyond the original three-year deadline should be left open in order to determine conclusively that foreign steel subsidization and dumping have ceased.

12. A stiff tariff should be imposed on countries determined by the U.S. government to be manipulating their currencies for trade advantage. In light of the Treasury Department´s equivocation on the currency policies of Asian mercantilist nations, the definition of currency manipulation that now exists must be broadened.  A strong dollar remains in the long-term interests of the U.S. economy, but foreign governments must not be able to distort trade flows to the advantage of their companies by giving them artificial cost advantages.    

13. The defense industry must be treated by the federal government in a fundamentally different way from the commercial sector.  It exists solely to serve the national interest and national security, and must be structured and managed accordingly.  Therefore, a 65 percent U.S. content requirement should be imposed on all military procurement, rising to 80 percent in five years and 95 percent in ten years.  This requirement should immediately cover the procurement of all goods and services for domestic military facilities and operations, and to the fullest extent possible cover foreign bases as well.  Presidential waiver authority should be sharply limited, especially for countries that have records as problem traders or that demand offsets for purchases of American weapons systems.

14. Public money taken from the domestic economy by taxes or borrowing should be returned to the domestic economic economy by the procurement of American-produced goods and services.  Procuring government services domestically is also necessary to ensure the continued privacy and security of the financial and health records of all Americans.  Thus a 50 percent U.S.-content requirement should be imposed on all non-military federal procurement, rising to 80 percent in five years and 95 percent in ten years. Presidential waiver authority should be sharply limited. This requirement should immediately cover the procurement of all services for domestic facilities and programs.

15. The scheduled abolition of the Multi-Fiber Arrangement governing world trade in textile and apparel should be suspended indefinitely, pending a study of the effects of the MFA's abolition on domestic and third-world producers in these industries.

16. Stiff tariffs should be levied on countries that impose offset requirements on U.S. defense manufacturers.

17. The president should declare a moratorium on foreign acquisitions of U.S. defense-related companies pending completion of comprehensive study of the status of the roughly 1,500 such companies acquired since 1988 under the current policy framework and government screening system.

18. Strict, detailed country-of-origin labeling should be required on all food and agricultural imports.

19. Legal immigration into the United States should be limited to 500,000 annually. Enforcement measures to halt illegal immigration should be dramatically increased, including significant and sustained increases in the budgets of those federal agencies responsible for enforcing immigration laws.  

Immigration at today´s levels – both legal and illegal – can only serve to depress wages for American workers by artificially inflating the supply of labor. Moreover, the most likely victims of such massive immigration flows are the recent arrivals themselves, who are forced to compete directly for jobs with the unending flow of newcomers arriving right after them.

The H-1B visa program for technology workers should be abolished.  A new federal commission comprised both of U.S. technology worker interests and tech industry interests should conduct a study to determine labor needs in technology industries and how they should be met.

LONGER-TERM MEASURES

1. Washington must insist that any future trade agreements be strictly reciprocal and strongly enforceable by the U.S. government, unilaterally if necessary.

2. Any future U.S. trade agreements must include provisions penalizing signatories for currency manipulation.  IN fact, currency manipulation can be used to defeat or offset the effects of reducing or eliminating trade barriers.  

3. The president should launch a major diplomatic campaign to press other OECD countries to increase third world imports, enforceable unilaterally by tariffs on the products of any non-cooperating OECD countries. Under-importing of third-world products by the European Union and Japan in particular has greatly increased the pressure on the U.S. market to absorb third-world production. Greater burden sharing in this vital sphere is urgently needed.

Because the overriding interest of U.S. trade policy is to advance the economic interests of the great majority on the American people and the long-term security and prosperity of the United States, Americans should feel no special obligation to import goods or services from third-world, or indeed any other, countries.  Such imports are especially unacceptable if they sacrifice the interests of American workers and domestic companies.  But a campaign to get Europe and Japan to do more is needed for three reasons:

  1. to counter perceptions that U.S. protectionism is the greatest current barrier to third world economic development;
  2. to highlight America´s record in promoting this development; and
  3. to call attention to the poor importing records of the other main OECD countries.

4. The United States should focus any new trade agreements on high-income countries capable of serving as final consumers of U.S. exports. Washington´s recent focus on third world countries capable of serving only as re-export platforms has been a substantial contributor to today´s current trade deficits.  In particular, the United States should seek a free trade agreement with Europe that excludes agriculture.  Washington should also take stronger measures to open Japanese and Korean markets, including unilateral tariffs if necessary.

5. The president should remove responsibility for monitoring and enforcing trade agreements from the office of the U.S. Trade Representative and place it in the Department of Commerce. As the lead agency for negotiating new trade agreements, the USTR´s office has every incentive to soft-pedal the deficiencies in both the structure and functioning of these agreements. Dividing these responsibilities would eliminate a major policy-making conflict of interest.  

6. Congress should enact strict foreign lobbying reform covering all federal officials, including lifetime bans on working for foreign interests for former senior Executive and Legislative branch officials.

7. The Commerce and Defense Departments should be designated as co-chairs of the inter-agency Committee on Foreign Investment in the United States, which reviews all proposed foreign acquisitions of U.S. defense-related companies. Exon-Florio filings  must be made mandatory, and the threshold for investigation lowered.  With the Treasury Department chairing this panel for its decade-and-a-half of existence, national security concerns have not been adequately addressed in CFIUS´s decisions, which generally reflect only Treasury´s desire to see surplus dollars in foreign hands repatriated effortlessly.

8. The president should commission immediate reports – written by special Commercial Action Teams composed mainly of industry representatives and some government officials – on foreign subsidies existing outside the steel industry and implement tariffs to offset them. Washington should first offer to negotiate the abolition of such subsidies, but it must insist on results that are achieved quickly, as well as completely verifiable and enforceable by the U.S. government.

9. The federal government must publish more complete and timely foreign trade and investment data. This data should include detailed information on the importing, sourcing, and employment trends of all multinational companies and in fact all companies that do business in the United States.  The provision of the data to the appropriate government agencies must be made mandatory.

10. The president should launch a comprehensive review of all U.S. defense alliances to determine which remain relevant to 21st century U.S. interests.  The president should explicitly state that foreign policy and defense considerations will no longer automatically trump the economic interests of the United States and the American people.

STRONG – BUT ESSENTIAL – MEDICINE

No one should assume that implementing this manufacturing revival plan will be pain-free. All economic adjustments and transitions exact costs as well as create benefits.  Those necessary to improve the long-run fundamentals of American manufacturing and strengthen the foundations of the U.S. and world economies as a whole will be that much more difficult because of the national and global economic excesses that were fostered since the completion of the “Tokyo Round” of international trade talks, but especially during the 1990s.

Specifically, some temporary slowdown in U.S. and global growth rates seems unavoidable. And thanks to the power of recklessly expanded international trade and investment, pushed unceasingly by economic ideologues and short-sighted multinational companies, achieving this slowdown will require serious restrictions on trade and investment flows.

Yet the only alternatives proposed to date are policies that are already proven failures, or that are surrenders to wishful thinking. Moreover, these responses can only postpone the day of reckoning, not prevent it. And just as permitting a disease to fester usually ensures that the needed treatment will be that much stronger, more painful, and less certain to work, permitting the manufacturing crisis to fester and inflating the global economic bubble further will only increase, not decrease the economic dangers facing America and the world.

The implementation of restorative measurers cannot be left to the good sense of Washington policymakers and elected officials.  As a group, they have demonstrated convincingly time and again that they do not grasp the magnitude of the problems they have created and that they are bereft of comprehensive solutions.  Instead, they prefer cosmetic changes, designed to relieve political pressure and ensure reelection.

If the necessary policy reorientation is to be accomplished, the impetus must come from the remaining domestic manufacturers, their employees, their communities, and local and state governments, which are experiencing first-hand the budget crises caused in large part by globalization policies – whether the movement of plants overseas, company bankruptcies due to unfair foreign practices, high-tech and other services outsourcing, uncontrolled immigration with the resulting disproportionate consumption of social services, etc.  In short, grass roots efforts must reach critical mass to force Washington to change two generations of misguided policies.

If any political leaders or economic experts know how to solve the manufacturing and trade crises without the significant trade restrictions featured in our action plan, the U.S. Business and Industry Council would welcome their ideas with open arms. But we would also be wondering what they´ve been waiting for.  The time for comprehensive action to save American manufacturing has long since passed. Very soon there will be little left to save.


TOPICS: Business/Economy; Culture/Society; Editorial; Foreign Affairs; Government
KEYWORDS: freetrade; globalism; immigration; manufacturing; nationaldebt; nationalsecurity; sovereignty; technology; thebusheconomy; trade; tradedeficit
Navigation: use the links below to view more comments.
first previous 1-20 ... 221-240241-260261-280 ... 441-458 next last
To: Erik Latranyi
202 - "Are vastly increased profits bad? Is that not the basis for capitalism? Ford owes this to its stockholders who are mainly ordinary workers."

You really should correct your impressions, and make that 'former workers'. The new workers, the chinese Ford workers, can't afford any Ford stock.
241 posted on 01/02/2004 7:28:14 PM PST by XBob
[ Post Reply | Private Reply | To 202 | View Replies]

To: RobFromGa
Factories prosper as jobs vanish -----------------------------

This piece has more holes in it than a swiss cheese. It begins with a collaterl exclusionary focus that avoids the issue critical to America. The issue is not whether China or Brazil or where are becoming more efficient or losing manufacturing jobs. The issue is that the jobs once done here are being shipped out. The profits made from importing foreign goods without domestic investment or physical involvement are argued to be efficiency and productivity. Poobaah.

242 posted on 01/02/2004 7:51:04 PM PST by RLK
[ Post Reply | Private Reply | To 228 | View Replies]

To: ninenot; Erik Latranyi
206-"But since you think all workers are merely ciphers on a spreadsheet, you might not get that concept, Erik."

nine, he is one of 'them':


236-"(the thieves who stole our innovations/knowledge/jobs and sent them overseas) "
243 posted on 01/02/2004 7:55:56 PM PST by XBob
[ Post Reply | Private Reply | To 206 | View Replies]

To: WilliamofCarmichael
I loathe both parties. Time for a new party.

---------------------

AMEN!

244 posted on 01/02/2004 7:59:17 PM PST by RLK
[ Post Reply | Private Reply | To 233 | View Replies]

To: RobFromGa
"Trying to stop the clock isn't going to work," he said. "Manufacturing jobs have been declining for 100 years, and it's going to keep happening."

Same prescription: Lower taxes. Smaller more efficient government interacting with private competition.Fewer bureaucratic job protectors. Caps for tort "awards."

245 posted on 01/02/2004 7:59:41 PM PST by alrea (let's go back to when liberalism meant more freedom from central authority)
[ Post Reply | Private Reply | To 228 | View Replies]

To: Willie Green
A Plan to Save American Manufacturing

Abolish the IRS and EPA. ;P

246 posted on 01/02/2004 8:01:47 PM PST by Paul C. Jesup
[ Post Reply | Private Reply | To 1 | View Replies]

To: XBob
182 - "Second, national security may be jeopardized in the short-run, however, we could build manufacturing plants in a few months to churn out what we need for any war effort (in face of a boycott). Do you remember WW2?????" It is very apparent you have never built a plant and know nothing about building, or where the equipment comes from, or where the machine tools are made. This lie of yours is just wishful thinking BS.

-----------------------

This clown wouldn't know a steel pland or a machining plant from eggplant.

247 posted on 01/02/2004 8:03:06 PM PST by RLK
[ Post Reply | Private Reply | To 230 | View Replies]

To: Erik Latranyi; ninenot
212-

http://www.suppliernetworks.com/overview.htm

Supplier Networks LLC

Sino-American Automotive Supplier Development and International Trade

Due to the significant difficulties in lowering their corporate cost structures, US automotive manufacturers are employing a global sourcing and integrated purchasing strategy to expand their product options and enhance pricing power. This initiative to source components and systems from emerging markets, primarily China, is being primarily driven by the two US automotive manufacturers, General Motors Corporation (GM), Ford Motor Company (Ford) and to an extent DaimlerChrysler AG (DCX).

According to industry sources, GM intends to raise its purchase from China over the next 3 to 5 years from $1.1 billion to over $10 billion. Ford has a similar target of $10 billion by the year 2010, after starting from a purchase of less than $100 million in 2002. DCX has begun to demand “world prices” that force automotive suppliers to find the absolute lowest cost for production on a global basis and provide that price in every region. With over 2000 automotive suppliers in China, there are numerous opportunities to focus on this important business trend.
China is becoming an increasingly large auto parts export base. The US Commerce Department reports a total of $2.2 billion of Chinese auto parts and components were imported into the US in 2002, which is almost three times the volume of imported components in 1997. The PAC Group estimates that exports of automotive components from China will grow to $70 billion by 2008.

China has a cost advantage primarily due to lower costs in labor, product and processing, plus the added benefit that the automotive industry is one of the “pillar” industries that receives government support. Additionally, the developing technology and advanced equipment from foreign investments have made auto parts suppliers in China more export competitive.

The challenges associated with the initiative to source in China are numerous and are several layers deep and span across commercial, technical, and/or operational challenges. For example, development of the Chinese supply base requires international expertise especially with a keen understanding of the inner workings of Detroit as well as understanding of new processes in South America, Europe, and Japan.

The major automotive manufacturers are not in the business of developing suppliers so that they can engage them in earnest. Although, they occasionally provide substantial assistance, the level of effort required to bring on a new Chinese supplier is well outside the bounds of what major automakers are willing to do. A firm with international automotive expertise, strong relationships, keen understanding of business development and marketing, to step in and assist the Chinese suppliers to effectively interface with Detroit for the benefit of both parties. This is the strategic value that Supplier Networks will bring to Sino-American automotive industry relations.

248 posted on 01/02/2004 8:32:31 PM PST by XBob
[ Post Reply | Private Reply | To 212 | View Replies]

To: XBob
Having done that, GM and Ford will wonder why they are not able to sell new automobiles the the people here they put out of jobs.
249 posted on 01/02/2004 9:33:15 PM PST by RLK
[ Post Reply | Private Reply | To 248 | View Replies]

To: A. Pole; Willie Green; Wolfie; ex-snook; Cacophonous; Jhoffa_; FITZ; arete; FreedomPoster; ...
I agree! And the time to start is now, before it is too late!

Time for another industrial revolution in the United States --- Rebuild the United States, Made in the United States and Buy From the United States.

Time to get truely American companies back on their feet. There management, employees, and local governments need to work together to get this turned around. It will take a long time, but if we don't start now, it may never happen!!
250 posted on 01/02/2004 9:37:30 PM PST by Jerr (What would Ronald Reagan do? There they go AGAIN!......)
[ Post Reply | Private Reply | To 6 | View Replies]

To: A. Pole; Willie Green; Wolfie; ex-snook; Cacophonous; Jhoffa_; FITZ; arete; FreedomPoster; ...
Far too much activity is being outsourced, off-shored or totally moved out of this country.

As the article states, it will take some strong medicine to fix the problem!

Time to bite the bullet and make it happen!

251 posted on 01/02/2004 9:42:07 PM PST by Jerr (What would Ronald Reagan do? There they go AGAIN!......)
[ Post Reply | Private Reply | To 6 | View Replies]

To: Paul Ross
223- there was no surplus under xlinton, except a surplus of lies:

The Debt To the Penny
Current Amount

12/31/2003 $7,001,312,247,818.28


Current
Month

12/30/2003 $6,915,186,083,875.25
12/29/2003 $6,916,516,664,113.52
12/26/2003 $6,915,121,384,308.12
12/24/2003 $6,927,206,071,138.91
12/23/2003 $6,930,329,859,205.35
12/22/2003 $6,923,902,827,390.09
12/19/2003 $6,921,782,749,480.24
12/18/2003 $6,922,308,687,684.80
12/17/2003 $6,932,242,837,786.48
12/16/2003 $6,937,495,551,032.68
12/15/2003 $6,935,737,372,166.94
12/12/2003 $6,939,710,592,770.24
12/11/2003 $6,939,621,502,947.36
12/10/2003 $6,936,475,127,245.87
12/09/2003 $6,940,395,230,585.36
12/08/2003 $6,940,376,825,298.36
12/05/2003 $6,937,966,948,177.28
12/04/2003 $6,939,572,558,142.72
12/03/2003 $6,936,234,103,128.50
12/02/2003 $6,918,260,082,500.99
12/01/2003 $6,914,406,243,287.65


Prior
Months

12/31/2003 $7,001,312,247,818.28
11/28/2003 $6,925,065,499,881.34
10/31/2003 $6,872,675,839,106.67


Prior Fiscal
Years

09/30/2003 $6,783,231,062,743.62
09/30/2002 $6,228,235,965,597.16
09/28/2001 $5,807,463,412,200.06
09/29/2000 $5,674,178,209,886.86
09/30/1999 $5,656,270,901,615.43
09/30/1998 $5,526,193,008,897.62
09/30/1997 $5,413,146,011,397.34
09/30/1996 $5,224,810,939,135.73
09/29/1995 $4,973,982,900,709.39
09/30/1994 $4,692,749,910,013.32
09/30/1993 $4,411,488,883,139.38
09/30/1992 $4,064,620,655,521.66
09/30/1991 $3,665,303,351,697.03
09/28/1990 $3,233,313,451,777.25
09/29/1989 $2,857,430,960,187.32
09/30/1988 $2,602,337,712,041.16
09/30/1987 $2,350,276,890,953.00

SOURCE: BUREAU OF THE PUBLIC DEBT

Looking for more historical information? Visit the Debt
Historical Information archives.


Updated January 2, 2004
252 posted on 01/02/2004 9:44:30 PM PST by XBob
[ Post Reply | Private Reply | To 223 | View Replies]

To: RinaseaofDs
226 - "We now buy all of the rare earth magnets for our cruise missiles from plants in Russia."

how about elaborating, rare earth magnets are normally not so rare.
253 posted on 01/02/2004 10:03:52 PM PST by XBob
[ Post Reply | Private Reply | To 226 | View Replies]

To: superloser
I don't need a "Constitutional solution" to this. Good grief!

Simply get another job! Change professions. It's what others have done. More importantly why do you see yourself above that? Elitist laziness is not becoming to even you.
254 posted on 01/02/2004 10:38:06 PM PST by nmh
[ Post Reply | Private Reply | To 126 | View Replies]

To: WilliamofCarmichael
233 - this deserves repeating:

Millions of Americans are paying the cost of changes brought on by "globalization," etc. For two years the Limbaughs and Tom Sullivans pushed the lie of the classic recovery and blamed the unemployed for unemployment.

Dem rats blast the President -- hoping and hoping the situation gets worse, both for the American workers and the American soldiers in the war to defend against radical Islam.

The Republicans say, "Jobs is jobs. Go sweep floors, Mr. Big Shot engineer. Your're making us look bad."

I loathe both parties. Time for a new party.


255 posted on 01/02/2004 10:40:10 PM PST by XBob
[ Post Reply | Private Reply | To 233 | View Replies]

To: RobFromGa
228- excellent post
256 posted on 01/02/2004 10:42:22 PM PST by XBob
[ Post Reply | Private Reply | To 228 | View Replies]

To: wirestripper
238 - "We made stainless, bronze and brass castings and had modernized with some vacuum molding tech etc"

I remember, the castings business went first to Japan and Spain, then to Korea, and I think most lately it has gone to Thailand and China, successively cheaper countries. I watched helplessly as my suppliers closed their doors, one after another. I doubt seriously that any of them are left now, which I used in the 80's.
257 posted on 01/02/2004 10:50:26 PM PST by XBob
[ Post Reply | Private Reply | To 238 | View Replies]

To: wirestripper
240-"The liberals want to teach arts and crafts and regulate chewing gum."

good one - too true!
258 posted on 01/02/2004 10:55:02 PM PST by XBob
[ Post Reply | Private Reply | To 240 | View Replies]

To: RLK
247 - "This clown wouldn't know a steel pland or a machining plant from eggplant"

very good - LOL
259 posted on 01/02/2004 11:09:54 PM PST by XBob
[ Post Reply | Private Reply | To 247 | View Replies]

To: RLK
249 - And focus particularly on this item - a 3000% increase in chinese autoparts imports in just 6 years:

"With over 2000 automotive suppliers in China, there are numerous opportunities to focus on this important business trend. China is becoming an increasingly large auto parts export base. The US Commerce Department reports a total of $2.2 billion of Chinese auto parts and components were imported into the US in 2002, which is almost three times the volume of imported components in 1997. The PAC Group estimates that exports of automotive components from China will grow to $70 billion by 2008."
260 posted on 01/02/2004 11:29:10 PM PST by XBob
[ Post Reply | Private Reply | To 249 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-20 ... 221-240241-260261-280 ... 441-458 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
News/Activism
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson