Replies

B.P. SHOW US THE MUDLOGS! By geologist, Chris Landau.

What are you hiding? Why are you hiding them? It is now too late.

Senator Bill Nelson of Florida is telling us that the oil is gushing up around the casing. The casing has failed. There are multiple layers of oil and gas, probably 50 in this well. If you could seal the bottom layer, in this well, the casing and cement has been blown out. You cannot seal the other 49 layers of oil and gas above this layer. Your cap is a failure that can not be closed. The more you close it, the more the oil and gas will come through the sea floor. You will never be able to shut this gushing well down. The best you can do is relieve the oil and gas pressure from this region.

You need to take the oil and gas pressure out of this area. Drill eight wells around this blowout well, positioned 1000 to 1500 feet apart.

2(two) new directional wells being drilled into this well, theoretically to be completed by August 2010, will not work to solve this Transocean-Halliburton-BP blowout well and will create a larger uncontrolled blowout disaster.
A mudlog is a schematic cross sectional drawing of the lithology (rock type) of the well that has been bored. Without looking at the mudlogs and e-logs, we are all navigating blind. They are the forensic tool that you use to discover what happened. The mudlog is your map and your compass and your guiding star.

2) How many oil and gas horizons were there in this well? There was certainly more than one. The mudlog will list the gas and oil horizons. Were there 10, 30 or 50? Which of these many horizons are we trying to seal? Are the proposed directional wells above some oil and gas horizons and below others? Why is this choice being made? Regardless, the directional wells that are being drilled, can not seal an open well or blown out well or blown out formation. Back pressure is required for drilling mud to stay in the well to keep the oil out to allow the cement to set. We need a quiet zone for the cement to set, not a “roaring river” of oil and gas. Whether you inject that cement from the top of the well or the bottom of the well, you have not changed a thing. The pressure in the well is the same everywhere. Directional wells will not work. You only create more holes with less back pressure to keep out the oil and gas. The drilling mud escapes. The cement escapes. Only new wells that do not intersect this blowout well will help drain the gas and oil pressure from this region. It is too late for this well. It can not be sealed.
3) It is a dangerous game drilling into high pressure oil and gas zones because you risk having a blowout if your mud weight is not heavy enough. If you weight up your mud with barium sulfate to a very high level, you risk BLOWING OUT THE FORMATION. What does that mean? It means you crack the rock deep underground and as the mudweight is now denser than the rock it escapes into the rock in the pore spaces and the fractures. The well empties of mud. If you have not hit high pressure oil or gas at this stage, you are lucky. If you have, the oil and gas comes flying up the well and you have a blowout, because you have no mud in the well to suppress the oil and gas. You shut down the well with the blowout preventer. If you do not have a blowout preventer, you are in trouble as we have all seen and you can only hope that the oil and gas pressure will naturally fall off with time, otherwise you have to try and put a newblowout preventerin place with oil and gas coming out as you work.

http://www.opednews.com/populum/page.php?f=B-P-SHOW-US-THE-MUDLOGS—by-Chris-Landau-100610-978.html