Posted on 08/12/2018 5:38:29 PM PDT by MeneMeneTekelUpharsin
Pattern was good enough with 00 Buck in it prior to cut. It should be fine now.
If you check on the Cal DOJ website the shotgun barrel/barrels can be shortened to not less than 18 inches and/or overall gun length of 26 inches.
From where I'm laying in bed and point at the door is about 12-14'. Will that work for me?
.
>> “Poured as blade is cutting...no overheating of barrel.” <<
Use a Tile saw, with cooling water running.
Didn’t have one. Had to use another type. It worked beautifully.
.
>> “But the sound of a pump shotgun being racked has an even better effect.” <<
If you can endure the smell of fresh excrement!
.
I had a short barrelled Franchi. It could be converted to either pump or auto. I can’t recall the model name right off hand.
It felt a little crude in the hand. It had a cylinder choke or lack of choke. I think it was 18 inches. To my surprise it shot very well at the skeet range. I did about as well with it as I did my Beretta skeet gun.
I particularly like the short barreled side by side hammer-less with ejectors. The lack of a pump or auto action makes them a lot shorter overall.
Anyone can now buy th emossberg 590 Shockwave pistol-gripped shotgun, in 20 or 12 guage, and it has just a 14’ barrel! NOT CLASS III! See here: https://www.gunbroker.com/item/774763821
Anyone can now buy th emossberg 590 Shockwave pistol-gripped shotgun, in 20 or 12 guage, and it has just a 14’ barrel! NOT CLASS III! See here: https://www.gunbroker.com/item/774763821
Now HERE is a very relevant post, on 3-D CENSORSHIP: It is worth noting that both Disqus and Fakebook CENSOR any mention of a website, www.CodeIsFreeSpeech.com that provides FREE downloads of 3D-printable firearm blueprints. And, since Facebook/Disqus logins are so prevalent for posting commentary across the Internet, they are very effectively suppressing this Forbidden Knowledge almost EVERYWHERE. Please go to the website, download some or all 10 of the free blueprints, and then, repost it to your friends and across the Internet, to the extent you can. Strike a BLOW against Fakebook and judicial CENSORSHIP! Support TWO amendments at once, the First and the Second!
Now HERE is a very relevant post, on 3-D CENSORSHIP: It is worth noting that both Disqus and Fakebook CENSOR any mention of a website, www.CodeIsFreeSpeech.com that provides FREE downloads of 3D-printable firearm blueprints. And, since Facebook/Disqus logins are so prevalent for posting commentary across the Internet, they are very effectively suppressing this Forbidden Knowledge almost EVERYWHERE. Please go to the website, download some or all 10 of the free blueprints, and then, repost it to your friends and across the Internet, to the extent you can. Strike a BLOW against Fakebook and judicial CENSORSHIP! Support TWO amendments at once, the First and the Second!
“My father had one he kept down under the seat of the truck.”
Nearly fifty years ago my neighbor had a cut down dbl-barrel that he carried in his truck. He worked night-shift on the railroad near Union Station in Washington, DC.
Locals from the neighborhood would occasionally get frisky and fill orders for their Midnight Auto Supply from the employee parking lot.
One night enough was enough. Catching a few thieves nearby, my neighbor cranked off a few rounds of Thunder & Light. Thieves beat feet until they noted that the pellets only made it 30-40 feet out of the barrel. Next it was neighbors turn to beat feet. Enthusiastically so! No idea whether it was an old lot of shells or simply the wrong load. Neighbor did get his money’s worth retelling the story.
I have the Mossberg 590s with the heat shield.
8+1 pump.
$299
I liked it so much I bought a spare/extra and I now have two of them.
http://www.mossberg.com/category/series/590-tactical/
If it has a BUTTSTOCK on it, it can’t be short than an overall length of 26”. Make sure you give accurate information here.
It had to be bad ammo.
I have a Mossberg 500.
I don’t know the answer, but I’d guess 2” or less.
However it’s much easier to handle in tight quarters.
May I suggest a Mossberg Shockwave 12 ga pump which comes with a 14” barrel. It carries load of 5+1 of 2-3/4” or 8+1 of 1-3/4” Aguila Mini Shells. Purchase off the shelf with no modifications needed.
With MY 18.5in barrel and 00 buck I get a 4-6 inch pattern at 25 feet.
Perfect for those .33in pellets, all 15 of them at 1200fps.
It’s like an entire Glock 9mm magazine with one trigger pull.
Kicks like a pissed off mule though.
Informed? Nope, that is contrary to Tuco's Wisdom:
When you have to shoot, shoot! Dont talk!
That’s the dilemma for the first couple shots.
Do you want something that will go through the sheetrock... or something that will throw a bit of a pattern?
I have a sheetrock wall between me and the hallway. Hate to go too light on the first load.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.