Posted on 12/26/2012 8:44:18 AM PST by T-Bird45
Thought I’d seen you make reference to it before but I may just be operating from your screen name.
Anyway...there's a bluff on the creek at O.H.S.P. that my oldest kid and I jumped off long time ago now...Twas fun!
FRegards,
You may want to learn a little more about C02 and the temperature/pressure required to stay at a liquid.
Sending freezing liquid, even if you could keep it from solidifying, into a Petroleum reservoir would thicken the hydrocarbons limiting the flow of the CO2. If you do start at a liquid phase on the ground, the initial cracking would enlarge the volume, creating pressure drop and solidifying the CO2 stopping the growth of the cracks, which is the whole point of fracturing process. Water is used for this method because of the very low compressible property of the fluid.
2. CO2 cant contaminate groundwater.
Neither does hydraulic fracturing. The contamination cases have all been linked to casing failures. Those would result in contamination regardless of fracturing methods.
3. CO2 can be easily separated from the nat gas and reused.
There is significant expense in doing so. I've been part of the design team for such facilities. And you have accomplished nothing to appease the global warming crowd as you have not sequestered the CO2.
4. Process would use far less water and produce far less liquid waste.
Since item one makes it all unworkable, that is a mute point. And also your claimed method only uses a more difficult fluid to handle and maintain, the problem is more complicated.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.