Free Republic
Browse · Search
VetsCoR
Topics · Post Article

Skip to comments.

First Look: Colt M16A1 Reissue
gundigest.com ^ | Dec. 5, 2016 | Drew Warden

Posted on 12/07/2016 4:54:38 PM PST by PROCON


The classic M16A1 was the iconic rifle of the Vietnam War. It was issued to the vast majority of U.S. soldiers during the conflict, and it’s general success in combat led to its continued service in the U.S. armed forces in varied forms over the years. And of course it wasn’t too long before the M16’s popularity translated to the civilian market as well.

Luckily, earlier this summer at the 2016 NRA Annual Meetings and Exhibits in Louisville, Kentucky, Colt teased the release of a reproduction, semi-auto-only M16A1 that faithfully replicates the look and features of the original, Vietnam-era rifle. The new rifle, which Colt has dubbed the M16A1 Reissue, is a virtual match to the classic design, featuring the same unique triangular handguard, 20-inch pencil-profile chrome-lined barrel with a 1:12-inch twist, and recognizable carrying handle.

Although I wasn’t in attendance at the event in Louisville, I did get a chance to get some shooting time with the new Colt M16A1 Reissue at Colt’s recent Media Day event at the historic Gunsite Academy in Paulden, Arizona. It was a great opportunity to learn more about the M16A1 Reissue from the Colt team and to put some rounds through it at the range.

While there are a ton of AR-15 style rifles available today, faithful recreations of the original military-issue M16A1 are a little harder to find. This can be especially disappointing for collectors looking for a semi-auto replica of this classic and historical rifle.

(Excerpt) Read more at gundigest.com ...


TOPICS: VetsCoR
KEYWORDS: banglist; colt; m16a1; reissue
Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-93 next last
To: PROCON; Mariner

In my Basic at FLW in ‘70 they had us shooting M-14s the two times we went to the range and shot 350 Yds and up.

I was only so-so with either. Vision issues that I didn’t figure out for another decade. I was pretty good with snap shot “quick-kill” with the BB Gun though...LOL


61 posted on 12/07/2016 6:27:08 PM PST by KC Burke (Consider all of my posts as first drafts. (Apologies to L. Niven))
[ Post Reply | Private Reply | To 5 | View Replies]

To: Lurker
I was required to hit a man sized target at 600 yards using a rack grade A-1 model using only iron sights and military issues ammunition.

I think a lot of folks forget that.

That 600 yard silhouette pop-up sure did look small through that little ring, didn't it?

Nevertheless, I never shot less than Expert with it, or with the 1911.

You're correct...it's the shooter, not the weapon.

62 posted on 12/07/2016 6:32:55 PM PST by OldSmaj (The only thing washed on a filthy liberal is their damned brains.)
[ Post Reply | Private Reply | To 21 | View Replies]

To: Spktyr

Bump, thanks.


63 posted on 12/07/2016 6:50:19 PM PST by PROCON (Onto the Great American Rebirth!)
[ Post Reply | Private Reply | To 59 | View Replies]

To: MrEdd
wi a legal 16" barrel...


64 posted on 12/07/2016 6:53:54 PM PST by Chode (You Owe Them Nothing - Not Respect, Not Loyalty, Not Obedience, NOTHING! ich bin ein Deplorable...)
[ Post Reply | Private Reply | To 18 | View Replies]

To: OldSmaj

It sure did. But the USMC knows how to teach marksmanship. That’s for sure.

L


65 posted on 12/07/2016 6:56:08 PM PST by Lurker (America burned the witch.)
[ Post Reply | Private Reply | To 62 | View Replies]

To: PROCON

“M-16 Rifle M16 Training Film: Rifle XM16E1 Operation & Cycle of Functioning pt1-2 1966 US Army 15min “

https://www.youtube.com/watch?v=RKKQcJnMEOo


66 posted on 12/07/2016 7:23:35 PM PST by Red Steel
[ Post Reply | Private Reply | To 5 | View Replies]

To: Farmer Dean
IF you have enough velocity.
67 posted on 12/07/2016 7:39:43 PM PST by smokingfrog ( sleep with one eye open (<o> ---)
[ Post Reply | Private Reply | To 55 | View Replies]

To: Chode
I know the smith that made that. He seems to prefer the FAL, though, and hangs out with us a lot on the FAL forums.

DSA FAL Para and yes this is how FN made some FALs:


68 posted on 12/07/2016 8:18:17 PM PST by Spktyr (Overwhelmingly superior firepower and the willingness to use it is the only proven peace solution.d)
[ Post Reply | Private Reply | To 64 | View Replies]

To: PROCON
For me, the first military rifles I "field stripped were the M1 Garand, M1 & M2 Carbines and the BAR in High School.

My first Army rifle was the M14 which was just as accurate but better than the M1, no more smashed thumbs for me.

69 posted on 12/07/2016 9:34:08 PM PST by dglang
[ Post Reply | Private Reply | To 12 | View Replies]

To: PROCON

I carried one of these for the majority of my four years (68-72) in the USAF working as a Security Policeman. Same as pictured, flash suppressor and all except we had early models without forward assist feature and were trained to load 18 rounds only in the mags to prevent jamming although they finally realized it was a gunpowder problem, not magazines. Got promoted to the armory while in Korea where I had access to all weapons whenever I wanted and succeeded in making the barrel of one of the rifles on the end of the rack look like a shotgun by the time I left. Loved shooting full auto! I always shot expert marksman but we never shot over 200 yards. Our SAT (Security Alert Team) had M-16’s with XM-148 grenade launchers and M-60 machine gun, extra barrel with asbestos gloves and 7.62 ammo in case something came up. I built an M-4 last year to deal with potential civil disturbances.


70 posted on 12/07/2016 9:37:03 PM PST by vigilence (Vigilence)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Spktyr
I’ll stick with my FAL for .308s - the G3’s a lot more violent when you fire it and to me has a weird balance.

Never fired a FAL, but concur about the G3. Had a HK-91 with polygonal rifling, and that thing astounded me with the harsh recoil. I was used to the M-14, a far more mild recoil impulse.

The AR-10/-LR-308 platform is downright gentle, especially if you have an adjustable gas block to tune it.

71 posted on 12/07/2016 11:18:19 PM PST by doorgunner69
[ Post Reply | Private Reply | To 53 | View Replies]

To: doorgunner69
Except like the AR-10's smaller relative, the AR-15, you get to chip carbon out of the innards for hours when you go to clean it. P

The G3 system is 'roller-delayed blowback' operated, as you know. It's not very *much* delayed, only barely enough to get the pressure in the chamber down to marginally safe levels before unlocking the bolt head, while the bolt carrier actually accelerates backwards even faster separately from the bolt head. As a result, there's not exactly a lot of mass in the operating mechanism to suck up the recoil, nor is there gas redirection to reduce recoil and the bolt starts its cycle the millisecond the round fires.

The FAL on the other hand uses a gas piston system and a tilting bolt, which makes for a very interesting felt recoil reducer and doesn't allow the bolt to start cycling until the bullet passes the gas tap towards the end of the barrel, so the recoil impulse has to try to move the entire mass of the rifle for quite a while. FALs are heavier than their G3 counterparts, too.


72 posted on 12/08/2016 12:26:51 AM PST by Spktyr (Overwhelmingly superior firepower and the willingness to use it is the only proven peace solution.d)
[ Post Reply | Private Reply | To 71 | View Replies]

To: PROCON

Will this one build up carbon and dirt quickly and jam like the original? Will the .223 round bounce off a padded coat at distance? I never liked that weapon, and as to field stripping and cleaning an ak takes about a minute in capable hands.


73 posted on 12/08/2016 3:30:05 AM PST by Jimmy Valentine (DemocRATS - when they speak, they lie; when they are silent, they are stealing the American Dream)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Mariner
The longer barrel matters.

Yep - the difference between my 6" barrel handgun with .357 rounds and my 16" barbell carbine with same rounds is from 1280fps to 1640 fps - close to 30% more "get there quicker". I wonder what the gain on this is.

74 posted on 12/08/2016 3:37:56 AM PST by trebb (Where in the the hell has my country gone?)
[ Post Reply | Private Reply | To 4 | View Replies]

To: yarddog

The Garand was designed to be a ten-shot 6.5mm, I believe.

This was changed to 30-06 and eight shots due among other reasons to massive stores of that ammo.

We missed a golden opportunity switch to the “just right” caliber.

(Wiki)
Twenty gas-operated .276 T3E2 Garands were made and competed with T1 Pedersen rifles in early 1931. The .276 Garand was the clear winner of these trials. The .30 caliber Garand was also tested, in the form of a single T1E1, but was withdrawn with a cracked bolt on 9 October 1931. A 4 January 1932 meeting recommended adoption of the .276 caliber and production of approximately 125 T3E2s. Meanwhile, Garand redesigned his bolt and his improved T1E2 rifle was retested. The day after the successful conclusion of this test, Army Chief of Staff General Douglas MacArthur personally disapproved any caliber change, in part because there were extensive existing stocks of .30 M1 ball ammunition.[14] On 25 February 1932, Adjutant General John B. Shuman, speaking for the secretary of war, ordered work on the rifles and ammunition in .276 caliber cease immediately and completely and all resources be directed toward identification and correction of deficiencies in the Garand .30 caliber.[12]:111


75 posted on 12/08/2016 3:56:00 AM PST by Travis McGee (EnemiesForeignAndDomestic.com)
[ Post Reply | Private Reply | To 47 | View Replies]

To: Spktyr

yup, friend of mine has one


76 posted on 12/08/2016 4:02:46 AM PST by Chode (You Owe Them Nothing - Not Respect, Not Loyalty, Not Obedience, NOTHING! ich bin ein Deplorable...)
[ Post Reply | Private Reply | To 68 | View Replies]

To: Jimmy Valentine

Probably so as it’s an exact replica. It doesn’t even have the later post-M4 feed ramps. This is an expensive piece of fanboy bait.

The first AR I ever owned that I felt I could trust was my piston-driven Ruger SR556. Piston drive solves *so* many problems that the platform has.


77 posted on 12/08/2016 4:18:32 AM PST by Spktyr (Overwhelmingly superior firepower and the willingness to use it is the only proven peace solution.d)
[ Post Reply | Private Reply | To 73 | View Replies]

To: trebb

Muzzle velocities:

M4, 14.5” barrel: 880 meters per second, 2900fps
M16A1 20” barrel: 948 meters per second, 3110fps


78 posted on 12/08/2016 4:25:28 AM PST by Spktyr (Overwhelmingly superior firepower and the willingness to use it is the only proven peace solution.d)
[ Post Reply | Private Reply | To 74 | View Replies]

To: PROCON

With loaded AR’s built on great lowers running $600-$800 these days, NOT EVEN A TINY CHANCE I’M SPENDING $2500!!!


79 posted on 12/08/2016 4:26:57 AM PST by Lazamataz (TRUMP WINS!!!! TRUMP WINS!!!! TRUMP WINS!!!! TRUMP WINS!!!! TRUMP WINS!!!! TRUMP WINS!!!!)
[ Post Reply | Private Reply | To 1 | View Replies]

To: Spktyr

Thanks - looks like a modest, but useful increase in velocity and probably a decent increase in accuracy.


80 posted on 12/08/2016 4:46:32 AM PST by trebb (Where in the the hell has my country gone?)
[ Post Reply | Private Reply | To 78 | View Replies]


Navigation: use the links below to view more comments.
first previous 1-2021-4041-6061-8081-93 next last

Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.

Free Republic
Browse · Search
VetsCoR
Topics · Post Article

FreeRepublic, LLC, PO BOX 9771, FRESNO, CA 93794
FreeRepublic.com is powered by software copyright 2000-2008 John Robinson