Posted on 07/21/2006 7:30:18 AM PDT by savedbygrace
Kind of a strange place to post this. Why not go to Microsoft instead, or a tech site. If your really stuck, try a system restore.
I can't help...but here's a
bump for publicity
You can do a system restore from safe mode. That will get you back to the point before you installed SP2.
Uh Oh.....
:)
Wish I had some advice, but I'm a bit computer illiterate. Money says you will have plenty of advice very, very soon.
Boot from the XP disc and selct the repair option.
Spotty hard drive? Try slaving the HD on another machine.
ritewingwarrior has a point...
As you obviously are getting on the net...use Google as your friend.
I usually can find needed info at MSWindows site (as convoluted as
their texts may be) or get solutions from tech blogs (while keeping up
my radar for bogus/malicious offers of assistance).
Bood luck!
If yoru disk activity ceases you may actually have a hardware problem rather than an OS problem.
I'm pretty sure you can get to safe mode by tapping F8 during bootup. Then you might actually be able to restore successfully.
You'll get your best support in a newsgroup. That's where all the real geeks are.
bttt
How? Safe Mode has the same result - black screen, no further disk activity. Game over.
No, I'm not a real Geek. But, I did stay at a Holiday Inn Express last night.........
Which XP install disc? Will the original disc, pre-SP1, repair the SP2 system?
If it's a HDD issue, you'll have to slave it on another machine and extract the data you need. If it's a Windows issue, your best bet is to boot from the XP OS CD and use the repair option. When you get to the DOS screen, run a chkdsk /f and see what you get.
I've had machines blow up and a simple chkdsk with the /f switch will make it all better.
After you get into the GUI, run scandisk and defrag and scan the hell out of the HDD with a virus scanner (I still use AVG http://free.grisoft.com). Then go out to http://www.sysinternals.com and download the TCPView and Autoruns programs. Check for open ports (indicate a possible trojan) with the TCPView program and use the Autoruns program to find the stuff that starts on boot. That'll get you started.
I goog;ed for a number of search terms for at least 30 minutes without success before posting this thread.
Yes, I can, but it ends with the same result. Black screen, no disk activity.
If there is nothing else wrong with your system you should be able to boot with the original CD and run the second repair option. If this works you can then update using the SP2 CD. You will have to update everything added to XP since SP2 but MS will take care of that for you.
I just finished spending over a week fighting a set of problems including what you describe. I could get up and running doing what I described above but that didn't cure the overall problem. The final solution was when I destroyed my operating system partition. I did something stupid to cause that but it worked out well in the end.
I should have done this a lot earlier but I was too stubborn. I reformatted my operating system partition and made a fresh XP installation. I'm still catching up on adding all of my programs.
The repair process is easier if you have a bootable CD with SP2 slipstreamed. That's not any help now though.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.