Posted on 03/11/2015 2:02:44 PM PDT by Red Badger
PinGGG!.....................
Looks like an ear of corn to me.
Hops was unknown in the New World until the pasty white guys showed up.....................
How did they carve it?....................
Seems obvious to me....rocket ship.
How did they carve it?....................
That is the truly amazing thing about these jade
artifacts. They could only be carved by abrasion
using hard or harder grit materials and all by
hand.
As an artist when I look at some of the inscriptions
and carvings made in this material I am just lost
to realize it was done by hand.
Even the Chinese jades used some primitive grinding
machines such as bow drills and foot powered lathes,
but as far as we know the artisans of this
time didn’t have them.
Corn holders for eating corn on the cob.
A diamond will cut diamond, so jadeite will cut jadeite?.............
It’s really remarkable. For grinding, drilling and some polishing, carborundum and garnet come to mind. Garnet is pretty common though not in jewelry quality in the Southwest, USA so it might be found further south.
It’s obviously a prototype cop killer bullet!
At the risk of being laughed off the forum...
At first sight it reminded me of a Ram Jet Engine. Control Boxes, Fuel injectors and a nose cone similar to those used on the SR-71’s engine.
A primitive human might have carved out something similar as a ‘representation’.
Bottle stoppers.
Best post so far.
Shhhh....! You’ll ruin a great story....!!!
Mighty kind of you, Sir. If they were they were a rich man’s bottle stopper then and a very rich man’s now. Now where did the jadeite decanters go?
Thanks Red Badger.
In the great scheme of things steel is relatively soft. So is jadeite.
Remember, these were Stone Age people: they knew their rocks. They understood that one type of stone will abrade another type. For general reference to stone hardness the scale developed by Friedrich Mohs is helpful: Mohs Hardness Scale
Jadeite falls approximately into the range of quartz: 6.5 to 7. Jadeite differs from other stones in one major respect: because of its fibrous interlocking crystalline structure it's very tough. Glass is pretty hard but it shatters easily; it's not tough. Jadeite doesn't shatter without great effort and that's why, along with is color range, it and its "sister jade" mineral nephrite, have been revered by several cultures for making axes, hammers and ceremonial objects.
Exact Olmec carving methods remain unknown but emery, which has the hardness of corundum (next to diamond) is found widely in Mesoamerica. With lots of time and labor (which the Olmec had in abundance) it will abrade most other stones. Larger angular pieces of emery sand would be used for initial stock removal while smaller and smaller emery powders would remove cutting scratches and transition to polish. It could also be used as an abrasive for hand-drilling and other purposes.
Disclaimer: Opinions posted on Free Republic are those of the individual posters and do not necessarily represent the opinion of Free Republic or its management. All materials posted herein are protected by copyright law and the exemption for fair use of copyrighted works.